guiltyboxswapper Posted September 30, 2018 Share Posted September 30, 2018 For Windows users, it might be worth running https://www.thesycon.de/eng/latency_check.shtml as well, just incase you have a rampant driver hogging resources. Link to comment
juanitox Posted September 30, 2018 Share Posted September 30, 2018 thanks i get 1ms latency with my config , i will let the latency checker running to see if there is a change my noise problem appears again. miska what HQP buffer time will be the most stable with the dac8 in DSD512 ? PC audio /Roon + HQPLAYER / HOLO Spring 2 / / DIY AD1 SET tube amp / DIY Altec 2 way horn Speaker Link to comment
sbenyo Posted September 30, 2018 Share Posted September 30, 2018 I get 499 micro second current and 620 absolute on the checker. I am not sure what this means. It does say the system is capable of real time streaming without dropouts. Link to comment
Popular Post sbenyo Posted September 30, 2018 Popular Post Share Posted September 30, 2018 I tested again. I rebooted the PC and ran the check. This time is was around 4000 micro seconds! Red all over and not enough for real-time audio streaming. I ran Fidelizer and checked again. Back to the 499 micro seconds! Nice. I think this proves that Fidelizer does the job. I can also assure that I need only to run it once after boot and even if I work on the computer for long time it keeps the good settings as was in my first test. It's stable also when playing DSD512 with poly-sinc-xtr. No white noise. Playing now when I'm writing this. Miska and Windows X 2 Link to comment
Miska Posted September 30, 2018 Share Posted September 30, 2018 Quote I tested again. I rebooted the PC and ran the check. This time is was around 4000 micro seconds! Red all over and not enough for real-time audio streaming. I ran Fidelizer and checked again. Back to the 499 micro seconds! Since 4000 µs is 4 ms and at DSD512 the DAC8 DSD's ASIO driver buffer size is around 1 ms, problems are pretty much guaranteed. Even 500 µs is just half of the buffer size and not so great, but well enough. With Linux, already 10 years ago, getting latency performance in about 5 µs range wasn't so much problem... On Win10 you usually get decent figures by setting "High Performance" power profile. If you have Win10 for Workstations you also get profile called "Ultimate Performance" which gives even better figures. Windows X 1 Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Miska Posted September 30, 2018 Share Posted September 30, 2018 4 hours ago, juanitox said: thanks i get 1ms latency with my config , i will let the latency checker running to see if there is a change my noise problem appears again. miska what HQP buffer time will be the most stable with the dac8 in DSD512 ? HQPlayer's buffer time setting doesn't have effect with DAC8 DSD because the driver has fixed buffer size. So just leave it at "Default" as it doesn't have any effect anyway. With most ASIO drivers it is best to leave it at "Default" and set buffer size from the ASIO driver's control panel (which you can open from HQPlayer's Tools-menu). In DAC8 DSD case, there's no such thing. With WASAPI on Windows and ALSA on Linux, start with 100 ms setting. With CoreAudio on Mac you cannot adjust it either, it is managed by CoreAudio itself. With NAA, leave it at "Default". Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
sbenyo Posted September 30, 2018 Share Posted September 30, 2018 Quote On Win10 you usually get decent figures by setting "High Performance" power profile. If you have Win10 for Workstations you also get profile called "Ultimate Performance" which gives even better figures. Just to be clear my testing is with "Ultimate Performance" profile. I also found a LatencyMon tool that shows better statistics. It shows current between 10-30 with occasional peaks to 100+. The max is 429 which is related to NVIDIA kernel driver. This seems more reasonable than the checker. Link to comment
rickca Posted September 30, 2018 Share Posted September 30, 2018 17 minutes ago, Miska said: If you have Win10 for Workstations you also get profile called "Ultimate Performance" which gives even better figures. You can enable Ultimate Performance on Windows 10 Version 1803. Thanks for reminding me about this. I haven't tried it yet. https://www.tenforums.com/tutorials/107613-add-remove-ultimate-performance-power-plan-windows-10-a.html Pareto Audio AMD 7700 Server --> Berkeley Alpha USB --> Jeff Rowland Aeris --> Jeff Rowland 625 S2 --> Focal Utopia 3 Diablos with 2 x Focal Electra SW 1000 BE subs i7-6700K/Windows 10 --> EVGA Nu Audio Card --> Focal CMS50's Link to comment
sbenyo Posted September 30, 2018 Share Posted September 30, 2018 I am still not sure what is causing it. One thing I am certain is that Fidelizer reduces latency. Red is how it looks just after reboot. LatencyMon shows Nvidia and Directx causing high DPC and ISR. I am still not sure if this is an issue and how to deal with it. For now I will certainly continue to use Fidelizer. Link to comment
Miska Posted October 1, 2018 Share Posted October 1, 2018 If the latency stays in 500 µs range, it is enough for this case and not really worth to put lot of effort the get it lower. Nvidia driver causes some amount of latencies due to desktop compositor doing huge transfers over PCIe bus. And it also depends if applications do heavy graphics on the GPU. So eye candy costs quite a bit of GPU traffic. Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
sbenyo Posted October 1, 2018 Share Posted October 1, 2018 It stays low and LatencyMonitor is all green. Current latency in low enough and most important stable even during heavy load, so it's good. I am happy I can see and hear the difference. It could be nice to know what is the root cause and what Fidelizer is doing to reduce it. Now that I know what to do to keep latency low, I can enjoy the music without problems or white noise. Link to comment
louisxiawei Posted October 1, 2018 Share Posted October 1, 2018 1 hour ago, sbenyo said: It stays low and LatencyMonitor is all green. Current latency in low enough and most important stable even during heavy load, so it's good. I am happy I can see and hear the difference. It could be nice to know what is the root cause and what Fidelizer is doing to reduce it. Now that I know what to do to keep latency low, I can enjoy the music without problems or white noise. The PC is not powerful enough to run so many messy windows background processes while running HQplayer at full power. That's why linux is much more hassle-free. I will not recommend using Fidelizer on PC running HQplayer because its core isolation and processor priority policy really mess up the CPU, not good for HQplayer. Turning on Fidezlier can cause my frame stutter during gaming. I don't really think the author of Fidelizer has idea how HQplayer utilizes the CPU, although he offers option of certain software optimisation including HQplayer. I only use Fidelizer on my windows NAA and I'm expecting more official approach like windows 10 lean version, but seems no further news from windows. Software: Roon, Tidal, HQplayer HQplayer PC: i9 7980XE, Titan Xp, RTX 3090; i9 9900K, Titan V DAC: Holo Audio MAY L2, T+A DAC8 DSD, exasound e12, iFi micro iDSD BL USB tweaks: Intona, Uptone (ISO) regen, LPS-1, LPS-1.2, Sbooster Vbus2, Curious cables, SUPRA Certified HiSpeed USB cable NAA: Logic CL100 powered by Uptone JS-2 AMP: Spectral DMC 30SV, Spectral DMA 300RS Speaker: Magico S3 MKII Rack: HRS SXR signature Link to comment
sbenyo Posted October 2, 2018 Share Posted October 2, 2018 Currently the only choice I have is to run Fidelizer to get Latency to the right level. I don't know of anything else that can do it better. I'll be glad to get better recommendations. I don't mind about gaming and music at the same time so for me Fidelizer is the right answer when I want to use HQPlayer and it works perfectly well much better with it than without it. If I want to do gaming I would not mind about Fidelizer. I currently run at "ultimate power" profile which is good for gaming and I have no problems with gaming or stability with or without Fidelizer. Link to comment
gdpr Posted October 4, 2018 Share Posted October 4, 2018 When the T+A 8 DSD came to market, a lot was written about the day and night quality difference going from DSD256 to DSD512. As I am now testing native DSD support on Linux with my T+A 8 DSD, I do not experience that performance gap between DSD256 and DSD512. Sometimes, I believe DSD512 is better, sometimes I believe DSD256 is better (more relaxed). This can be due to a lot of things, to start with my hearing, my room, performance of my streamer, HQembedded filter/modulator configuration, ...... As I am sure there are a number of CA members playing DSD512 with the T+A 8 DSD dac (using Windows), I would love to request a couple (2-3) performances, that for each of you personally, proof the quality difference between these 2 DSD upsampling levels. It would be great if software player and its filter/modulator configuration could be added. Looking forward to your recommendations. Dirk P.S. today I can play on my Pinkfaun 2.16 streamer with Roon/HQembedded DSD64 upsampled to DSD512 with poly-sinc-xtr/AMD7 Redbook upsampled to DSD512 with poly-sinc-xtr-2s/AMD7 (for now I have settled on this filter choice) Link to comment
sbenyo Posted October 4, 2018 Share Posted October 4, 2018 Dirk, there is no night and day difference and I don't believe anyone really experienced such a difference. I can assure you both are great. From my experience DSD512 feels fuller and deeper which gives a small but significant advantage over 256. I only use poly-sinc-xtr. I just tried it with a couple of tracks, redbook and hi-res. I never used 256 before and I just did a sort experiment so everything I say here is only based on my short testing session. For me the difference is noticeable. It's seems more pronounced playing the hi-res (24/192) less with redbook. I never tried DSD to DSD conversion. I believe some may can claim it subtle but significant some may less notice it. I've met many audiophiles and their experiences are not always the same when it comes to subtle differences (some find it very significant, some not). I am on the subtle differences side. I like ones that brings higher quality so for me it's better significant enough but not by a big margin. If I had no way to compare, I can assure you I could also be happy enough with only the 256 but after the comparison I'm staying with 512. BTW, some people will even tell PCM sounds better. The truth is that PCM sound different. For me it's more like comparing SS to tube. DSD is definitely warmer and I like it better but this can be a matter of taste rather than comparing the same sound and quality. Link to comment
m3lraaHnevetS Posted October 4, 2018 Share Posted October 4, 2018 Dirk, may I suggest trying a better DAC like the Pink Faun DAC 2.32 and use HQP to serve files in their native format? I used to do redbook --> DSD512 into a T&A DAC8 DSD before but once I had a little session at PF HQ I was smitten...and turned to the dark side... Pink Faun Streamer —> Pink Faun DAC --> Ayre AX5 --> Paradigm S8 Link to comment
Popular Post juanitox Posted October 6, 2018 Popular Post Share Posted October 6, 2018 little update with my T+Adac8 problem woth DSD it seems that it was not a dac problem but a USB crappy device first i tought it was my Intona but after many test i have found that it was the ifi audio Idefender. don't know really know why i used it in my system but now it works fine without it ... sometimes keep it simple is better ? Allan F and Miska 2 PC audio /Roon + HQPLAYER / HOLO Spring 2 / / DIY AD1 SET tube amp / DIY Altec 2 way horn Speaker Link to comment
nc42acc Posted October 15, 2018 Share Posted October 15, 2018 Anybody willing to post the DSD settings for the imbedded version of HQ Player? Switched to a Linux base server and have no clue how to set up the imbedded version for the DAC 8. Thanks for anyone’s help. Link to comment
shadowlight Posted October 16, 2018 Share Posted October 16, 2018 2 hours ago, nc42acc said: Anybody willing to post the DSD settings for the imbedded version of HQ Player? Switched to a Linux base server and have no clue how to set up the imbedded version for the DAC 8. Thanks for anyone’s help. Once you have embedded version running connect to your server using browser http://ip_address:8088/. Logon and select configuration link at the bottom of the page. The rest of the stuff matches up with what you had with desktop version. Link to comment
Vitor Posted October 23, 2018 Share Posted October 23, 2018 How does this dac perform connected to a sotm sms200 Ultra / txUSB Ultra? Anyone using this combo can comment? Thanks. In the beginning God made 'the light.' Shortly thereafter God made three big mistakes. The first mistake was called MAN, the second mistake was called WO-MAN, and the third mistake was the invention of THE POODLE. Link to comment
gdpr Posted October 23, 2018 Share Posted October 23, 2018 Hi Vitor I am not able to respond to your question, as I do not have such a combo. However, I am a little bit surprised by your question. Applying a device such as the sms200 Ultra / tx USB Ultra is usefull to improve on the SQ of the source (PC, streamer, network player, ...) , not of the DAC itself imho. The DAC itself is more suspectible to format of the data it is fed with, I.e. it performs better with DSD than with PCM. Not that is bad with PCM at all! What is your source that you want to improve with the sms200 Ultra/ ....? Dirk Link to comment
Vitor Posted October 23, 2018 Share Posted October 23, 2018 The sms200 Ultra is a streamer, not sure what you mean. In the beginning God made 'the light.' Shortly thereafter God made three big mistakes. The first mistake was called MAN, the second mistake was called WO-MAN, and the third mistake was the invention of THE POODLE. Link to comment
Argopo Posted October 24, 2018 Share Posted October 24, 2018 On 6/5/2018 at 11:46 AM, louisxiawei said: Just give you guys an update: I reported the "faint pop" issue to T+A two days ago and today I got a detailed reply from Lothar Wiemann. Thumb up for their professional attitude. They were able to reproduce the problem as well and showed me a screenshot from an oscilloscope indicating the "pop" noise on the right channel. They found out that the pop occurs right at the output of the Amanero USB receiver and told me it is not a problem of the DAC circuit or the clocking circuitry / any other hardware problem. I also shown them what we discussed here on CA and some @Miska technical reply explaining the potential reasons. They also think it's either the problem of Amanero windows driver or the USB receiver firmware. They've contacted the Amanero and will try to fix the problem. Will keep you updated. On 6/30/2018 at 7:38 AM, louisxiawei said: Some updates of T+A DAC8 DSD firmware upgrade progress: With some great help from T+A (Lothar Wiemann), I've managed to upgrade the firmware via RS232 approach. Lothar is really a helpful gentleman being very supportive regarding this matter. In general, my upgrade experience matches what @RS241 said a year ago. Especially this: Hence, my DAC8 DSD now has been re-flashed to Amanero and the PC reads it as Amanero device and it must be used with Amanero driver (Combo384 ASIO 1.03), T+A driver will not work. Please note that: Currently there is no way back to the T+A firmware once it is re-flashed to Amanero. Current Amanero firmware used on DAC8 DSD is: CPLD firmware: CPLD_for_1080 CPU firmware: DSD512x48x44 I've been testing it for quite a few hours, so far, the "pop sound" issue from the R channel previously reported seems to be solved. One might ask: does this firmware support linux DSD512? The answer is no. But good news is: Amanero firmware 2004be is the one that supports linux DSD512. So, once this manual FW upgrade was done, one can have total freedom to try any latest Amanero firmware on DAC8 DSD. I have not tried the 2004be on DAC8 DSD yet, but this might be the potential way to experience DSD512 on linux. Also, be aware that Amanero windows driver does not work with 2004be at the moment (that is also why T+A cannot issue a 2004be firmware update). Regarding the detail of the FW upgrade without opening the enclosure: Two steps in general: 1. Update the DAC8 DSD firmware to V2.6 onwards 2. initiate service of DAC8 DSD and use oemtool117 to flash the firmware Step two is very safe and easy, I have nothing to comment. The step one can be safely done with the help of T+A MP8, and this is also the way T+A recommends. If you don't have access to MP8, then you need to use RS232 connection as S0133 service note described for the upgrade. This is the method I used and is not very recommended by T+A. It is highly risky to turn your DAC8 DSD into a brick because it has no recovery mechanism. There are some tricks during the upgrade and it was a bit nervy indeed since I failed three times during the RS232 upgrade. Another good news is: Lothar has been writing a programme for PC to do a safe upgrade with secure recovery for DAC8 DSD. But it might take some time since he uses his own spare time doing it. For those who dare not upgrade it manually at risk or don't have a MP8, this might be the best solution for all. So again, patience is a good virtue. I might open a thread about my experience of this risky upgrade if I have enough spare time or there is an increasing need for the FW upgrade. But I doubt T+A will support this since it raises chance to send broken unit to the factory and causes more trouble. Since I am still encountering the same “pop” “chirping” static noise when playing back 96/192 family files upconverted to DSD512, I have revisited this thread for some updates. It appears since the above posts by @louisxiawei in June, there has been updates to the DAC firmware and several iterations of the Amanero firmware which potentionally solved the problem, sort of. But, as of today, there is no official T+A “fix” for this problem because firmware is still being beta tested. Correct? So, those of us with this problem are still in wait mode? And based on the past few pages, T+A considers this issue an isolated occurrence, so an official fix might not be forth coming. Which means I may need to start splicing together RS232 cables and playing Russian roulette with my DAC. Software: HQPlayer | JRiver | Fidelizer Pro | Roon | Qobuz Music Server: i7 6700K (Windows 10) | DAC: T+A DAC8 DSD, Marantz SA 14S-1, Schitt Yggdrasil | Preamp: DIY AMB alpha24 Fully-differential line amp | Amp: DIY M3 Balanced or DIY Tube Amp (2A3-300B) | Headphone: Shure SRH-1840, Audeze LCD-X, AKG K-501, Sennheiser HD600, HD800 | Speakers: Klipsch Heresey III Link to comment
louisxiawei Posted October 24, 2018 Share Posted October 24, 2018 2 hours ago, Argopo said: It appears since the above posts by @louisxiawei in June, there has been updates to the DAC firmware and several iterations of the Amanero firmware which potentionally solved the problem, sort of. But, as of today, there is no official T+A “fix” for this problem because firmware is still being beta tested. Correct? So, those of us with this problem are still in wait mode? I was told that the units after June 2018 are all installed with the latest firmware (CPU firmware: DSD512x48x44) which fix the "pop" noise, so in terms of the firmware, I don't think it's a beta test. However, with users' own RS232 cable flash, we cannot use T+A official driver but driver downloaded from the Amanero website. From my experience, Amanero driver for windows 10 has glitch (producing blow sound during the track switch). But the windows 7/8/vista has no such problem on my windows 10. I'm still waiting for Amanero to fix this. Whether T+A official driver has this glitch, no idea. T+A previously commented that the pop noise only happened on few batches with certain firmware. My DAC8 DSD was purchased in early 2017 in the UK and I think the firmware version was labeled on the box saying V2.0. Some of my other friends purchased their units (V2.2) from Hong Kong sometime in 2017, and they also found the pop noise. Quote And based on the past few pages, T+A considers this issue an isolated occurrence, so an official fix might not be forth coming. Which means I may need to start splicing together RS232 cables and playing Russian roulette with my DAC. Or borrow a MP8 unit to do the update from the local dealer if they have one. Maybe contact T+A to arrange this? Software: Roon, Tidal, HQplayer HQplayer PC: i9 7980XE, Titan Xp, RTX 3090; i9 9900K, Titan V DAC: Holo Audio MAY L2, T+A DAC8 DSD, exasound e12, iFi micro iDSD BL USB tweaks: Intona, Uptone (ISO) regen, LPS-1, LPS-1.2, Sbooster Vbus2, Curious cables, SUPRA Certified HiSpeed USB cable NAA: Logic CL100 powered by Uptone JS-2 AMP: Spectral DMC 30SV, Spectral DMA 300RS Speaker: Magico S3 MKII Rack: HRS SXR signature Link to comment
OE333 Posted October 24, 2018 Share Posted October 24, 2018 14 hours ago, Argopo said: Since I am still encountering the same “pop” “chirping” static noise when playing back 96/192 family files upconverted to DSD512, I have revisited this thread for some updates. It appears since the above posts by @louisxiawei in June, there has been updates to the DAC firmware and several iterations of the Amanero firmware which potentionally solved the problem, sort of. But, as of today, there is no official T+A “fix” for this problem because firmware is still being beta tested. Correct? So, those of us with this problem are still in wait mode? And based on the past few pages, T+A considers this issue an isolated occurrence, so an official fix might not be forth coming. Which means I may need to start splicing together RS232 cables and playing Russian roulette with my DAC. I think we are talking about 2 different things here: 1.) The "faint pop noise" which @louisxiawei mentioned. This occurs only with few DACs. If your DAC is affected, this problem can be solved by a firmware update. The normal way to get this update installed on your DAC is to contact your T+A dealer or contact T+A service dept. [Note: If you don't want to give your DAC to a dealer or send it to T+A service, you might alternatively consider option no. 2 below.] 2.) The other thing is DSD512 from a Linux based source. The DAC8DSD does not officially support Linux as operating system for the source. However: with a recent Linux kernel (> 4.15) the DAC8DSD will work with PCM up to 192kSps and DSD up to DSD128 (DoP mode). For higher sample rates under Linux there is currently no official support. Amanero works on DSD512 compatibility for the USB receiver but this is still work in progress and only beta firmware versions are available directly from Amanero. For those who want to experiment with the latest Amanero firmware on their DAC8DSD, it exists the possibility to install a firmware on the DAC8DSD which "opens" the DAC and then permits to flash any USB receiver firmware (experimental or stable) from the Amanero repository on the DAC8DSD USB receiver chips. After flashing the USB receiver with original Amanero firmware, the original Amanero Windows driver has to be used instead of the Windows driver from the T+A website. Note: The Amanero Windows driver is functional identical to the T+A driver it only uses the standard VID/PID from Amanero instead of the T+A VID/PID. So it is up to you. If you want to experiment (especially with DSD512 and Linux) use option 2, otherwise go the official way. T+A Fellow (Head of R&D @ T+A 1989-2021) (*) My postings represent my private and personal opinion and hopefully are helpful to the members of this forum T+A MP200 | T+A DAC200 | T+A A200 | T+A Talis S300 | DAW: Core i7 8700K - Linux 5.4.0 - Roonserver + HQP | NAA on RockPiE (RK3328) Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now