odelay Posted October 6, 2020 Share Posted October 6, 2020 Grazie @antonellocaroli, good to know. I have updated the database a lot over the past few days. No joy, as of yet... Leaving the setting blank doesn’t show artwork. I’ll try some other iOS apps 🤞 TF cards - USB -> GentooPlayer in RAM on Rpi4b, Ian’s PurePi II, FIFO Q7, HDMI-pro -> Audio GD R-27 -> S.A.T. Infinity monoblocks -> Gallo Stradas + TR-3 sub / Erzetich Phobos Link to comment
DomieMic65 Posted October 6, 2020 Share Posted October 6, 2020 Hi @antonellocaroli... there are some settings that give error!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted October 6, 2020 Author Share Posted October 6, 2020 16 minutes ago, DomieMic65 said: Hi @antonellocaroli... there are some settings that give error!! just to understand .... which settings and which errors? GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted October 6, 2020 Share Posted October 6, 2020 15 minutes ago, antonellocaroli said: just to understand .... which settings and which errors? "Failed to load script info. Try to reload the page. Error message: Failed to connect to the server" This is the error for "Set governor". Well actually now hat I tried again except from the above (that I am mainly interested) and "setMyMPD procces" all the others seem to work! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted October 7, 2020 Author Share Posted October 7, 2020 9 hours ago, DomieMic65 said: "Failed to load script info. Try to reload the page. Error message: Failed to connect to the server" This is the error for "Set governor". Well actually now hat I tried again except from the above (that I am mainly interested) and "setMyMPD procces" all the others seem to work! set governor should work...have you tried gp-update? MyMpd set you're right I have to check.... DomieMic65 1 GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted October 7, 2020 Share Posted October 7, 2020 6 hours ago, antonellocaroli said: set governor should work...have you tried gp-update? MyMpd set you're right I have to check.... Just tried again after gp-update but it still gives error May be it has to do with kernel 5.4.65? Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted October 7, 2020 Author Share Posted October 7, 2020 42 minutes ago, DomieMic65 said: Just tried again after gp-update but it still gives error May be it has to do with kernel 5.4.65? Solved DomieMic65 1 GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted October 7, 2020 Share Posted October 7, 2020 Just now, antonellocaroli said: Solved I deed!!! Thank you once more!!!!! Gentooplayer support is perfect!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted October 12, 2020 Author Share Posted October 12, 2020 following this discussion, intrigued I compiled a kernel with patches, adapted to version 5.x , for rpi3/usb bridge I called this kernel test, you can find it in this update... GentooPlayer home Facebook Documentation Link to comment
Exocer Posted October 12, 2020 Share Posted October 12, 2020 Is it recommended to upgrade your pre 3.0 instance to a more current version or start from scratch? Planning to donate to register as well. Thanks Link to comment
Zauurx Posted October 12, 2020 Share Posted October 12, 2020 1 hour ago, antonellocaroli said: following this discussion, intrigued I compiled a kernel with patches, adapted to version 5.x , for rpi3/usb bridge I called this kernel test, you can find it in this update... Is it because I mentioned "poker" to switch to the new version of Gentooplayer ?? Is the game worth it? 🙃 ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
antonellocaroli Posted October 13, 2020 Author Share Posted October 13, 2020 8 hours ago, Exocer said: Is it recommended to upgrade your pre 3.0 instance to a more current version or start from scratch? Planning to donate to register as well. Thanks there is no upgrade to 3....need to start from zero... Exocer 1 GentooPlayer home Facebook Documentation Link to comment
lithiumnk Posted October 15, 2020 Share Posted October 15, 2020 I have a problem with upnp on audirvana. I have searched on audirvana forums as well about this problem. Many users have reported white noise during playback of off-line/online content. Its very disturbing. I fear for my speakers/hps & most importantly my hearing. I am using Gentoo player 5.4.65-GentooPlayer-MIN-NOGRAPH-RCU+ ramroot/Profile 1 on rpi4b 4gb on Metrum Ambre. Source is audirvana 3.5.40 (3570) running(offline/streaming tidal/qobuz) on MacBook pro 2014 via Ethernet -->Uptone Etherregen--> Ambre-->Pavane>amps>hps/speakers. Running only upmpd & mpd. After ramroot: 3130MB free of total 3859MB. I have tried using other profiles & no profiles. The problem(white noise) persists. This problem is not there with roonbridge. Is anyone facing the same problem ? Kindly advise. DDC: Singer SU6, Metrum Ambre DAC: Metrum Pavane, Weiss 205 Amp/Preamp: AGD Audions, Herron VTSP 360 Ref HP: Raal SR1a, BS650, BP580, HE6sev2, Yamaha HP1 Speakers: Kairos Link to comment
antonellocaroli Posted October 17, 2020 Author Share Posted October 17, 2020 Info. Some users have had problems with their internet connection. the problem was caused by using the router to assign the fixed ip to a pc (via the mac adresse). (I didn't like this way) At the same time they set a fixed ip on the pc and disable the Dhcp. By disabling the dhcp, the router, through the function above, can no longer route the pc to the internet, because to do so it needs the dhcp to be active on the pc. This is normal, the router uses a dhcp server to do this. If you want to use a fixed ip and disable dhcp, my advice is not to use the router function for fixed ip, but to do it from the pc, in this case you can disable dhcp. GentooPlayer home Facebook Documentation Link to comment
Zauurx Posted October 18, 2020 Share Posted October 18, 2020 Hi, I tried to used Ramdisk with 5.4.65-201012 Test kernel. But there are errors ! Choose your operation: [0 - 15]:3 do you want to start the ramdisk? y/n y Copyng root filesystem to RAM... wait... wait... Could not find platform independent libraries <prefix> Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] wait... [Copy necessary files] du: cannot access '/opt/logitechmediaserver': No such file or directory du: cannot access '/opt/RoonBridge': No such file or directory du: cannot access '/opt/icedtea-bin*': No such file or directory du: cannot access '/opt/bubbleupnp': No such file or directory wait... wait... wait... /etc/default/ramdisk.sh: line 185: 3895 Killed rsync -a /newuser1/ /mnt/.ramdisk/ramdisk5 rsync: connection unexpectedly closed (206716 bytes received so far) [generator] rsync error: error in rsync protocol data stream (code 12) at io.c(228) [generator=3.2.3] wait... wait... Killed But after reboot : Quote figlet: big: Unable to open font file Profile1 RamSystem Mode 1 Free memory: 10MB of total 967MB 5.4.65-GentooPlayer-MIN-NOGRAPH-TEST+ ─────────────────────────────────────── GentooPlayer | 22:03 | dom 18/10/2020 ─────────────────────────────────────── v3.00 | Raspberry Pi 3B/3B+ (aarch64) ─────────────────────────────────────── ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
Exocer Posted October 18, 2020 Share Posted October 18, 2020 Thanks @antonellocaroli, Startech Fiber NIC now works with MIN kernels. Things sound very good, better than the similar PF-ST Kernel. Link to comment
antonellocaroli Posted October 19, 2020 Author Share Posted October 19, 2020 7 hours ago, Zauurx said: Hi, I tried to used Ramdisk with 5.4.65-201012 Test kernel. But there are errors ! Choose your operation: [0 - 15]:3 do you want to start the ramdisk? y/n y Copyng root filesystem to RAM... wait... wait... Could not find platform independent libraries <prefix> Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] wait... [Copy necessary files] du: cannot access '/opt/logitechmediaserver': No such file or directory du: cannot access '/opt/RoonBridge': No such file or directory du: cannot access '/opt/icedtea-bin*': No such file or directory du: cannot access '/opt/bubbleupnp': No such file or directory wait... wait... wait... /etc/default/ramdisk.sh: line 185: 3895 Killed rsync -a /newuser1/ /mnt/.ramdisk/ramdisk5 rsync: connection unexpectedly closed (206716 bytes received so far) [generator] rsync error: error in rsync protocol data stream (code 12) at io.c(228) [generator=3.2.3] wait... wait... Killed But after reboot : seems to be a problem of full ram. show me systeminfo and the result of the command du -sh /* outside the ramsistem? GentooPlayer home Facebook Documentation Link to comment
Zauurx Posted October 19, 2020 Share Posted October 19, 2020 Finally, I reinstalled everything quietly .. choose Profile 3 (as on version 2.15). And all in RAM. But I have a return of random blanks ... no clicks .. some blanks .. rare. System : NAA on Allo USBridge with NAA/GentooPlayer on IPV6 _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ Profile3 Profile: Profile3 RamSystem: Mode 3 Free memory: 395MB of total 967MB Kernel: 5.4.65-GentooPlayer-MIN-NOGRAPH-TEST+ ─────────────────────────────────────── GentooPlayer | 15:05 | lun 19/10/2020 ─────────────────────────────────────── v3.00 | Raspberry Pi 3B/3B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.122 ─────────────────────────────────────── Players Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Enabled] LigitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Disabled] UpMpdCli [Disabled] RoonBridge [Disabled] RoonServer [Disabled] Mpd-Sima [Disabled] MYmpd [Disabled] minimserver [Disabled] shairport-sync [Disabled] spotify-connect [Disabled] GP-Service Info: gpchronystop [Enabled] gpgovernor [Enabled] gphavagedstop [Enabled] gpireteonline [Enabled] gpkernel1 [Enabled] gprtclock [Enabled] gpsetprofile3 [Enabled] gpsetrestart [Enabled] dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait noibrs noibpb nopti nospectre_v2 nospectre_v1 l1tf=off nospec_store_bypass_disable no_stf_barrier mds=off mitigations=off maxcpus=2 isolcpus=1 nohz_full=1 rcu_nocbs=1 ############################### *** Scanning for playback devices *** Card 0, ID `DAC55688069', name `ADI-2 DAC (55688069)' Device 0, ID `USB Audio', name `USB Audio', 1 subdevices (1 available) 2 channels, sampling rate 44100..768000 Hz Sample formats: S32_LE Buffer size range from 16 to 131072 Period size range from 8 to 65536 Subdevice 0, name `subdevice #0' ############################### AUDIO CARDS CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 USB Audio card usb1 --> 2a39:3fd3 RME ADI-2 DAC card0 STATUS --> closed -------------------------------------------------------------------------------------------------------- Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 2.8G 25G 10% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 97M 276K 97M 1% /run shm tmpfs 484M 0 484M 0% /dev/shm /dev/mmcblk0p1 vfat 352M 219M 134M 63% /boot none tmpfs 12M 9.4M 2.0M 83% /bin none tmpfs 16M 13M 2.9M 81% /etc none tmpfs 9.7M 7.7M 2.0M 80% /sbin none tmpfs 35M 25M 11M 71% /lib none tmpfs 9.6M 8.5M 1.1M 90% /lib64 none tmpfs 414M 378M 37M 92% /usr none tmpfs 32M 2.6M 30M 8% /var none tmpfs 49M 0 49M 0% /tmp none tmpfs 77M 61M 16M 80% /opt none tmpfs 56M 6.1M 50M 11% /root [ OK ] Root access verified. ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 41'c : 105'f | Optimal temperature. Governor | powersave Current Freq Min Freq Max Freq CPU0 | 600 MHz 600 MHz 1200 MHz CPU1 | 600 MHz 600 MHz 1200 MHz CPU2 | 600 MHz 600 MHz 1200 MHz CPU3 | 600 MHz 600 MHz 1200 MHz [ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it. - if the temperature is not displayed, first run the command: sensors-detect --auto ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
Zauurx Posted October 19, 2020 Share Posted October 19, 2020 By honesty, I need to test more .. I think the blanks are coming from the NUC because of high resolution files (+ convolution and HQP). There are some network optimisation with this test kernel ? for ASIX chips ? ;) ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
antonellocaroli Posted October 19, 2020 Author Share Posted October 19, 2020 14 minutes ago, Zauurx said: Finally, I reinstalled everything quietly .. choose Profile 3 (as on version 2.15). And all in RAM. But I have a return of random blanks ... no clicks .. some blanks .. rare. System : NAA on Allo USBridge with NAA/GentooPlayer on IPV6 _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ Profile3 Profile: Profile3 RamSystem: Mode 3 Free memory: 395MB of total 967MB Kernel: 5.4.65-GentooPlayer-MIN-NOGRAPH-TEST+ ─────────────────────────────────────── GentooPlayer | 15:05 | lun 19/10/2020 ─────────────────────────────────────── v3.00 | Raspberry Pi 3B/3B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.122 ─────────────────────────────────────── Players Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Enabled] LigitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Disabled] UpMpdCli [Disabled] RoonBridge [Disabled] RoonServer [Disabled] Mpd-Sima [Disabled] MYmpd [Disabled] minimserver [Disabled] shairport-sync [Disabled] spotify-connect [Disabled] GP-Service Info: gpchronystop [Enabled] gpgovernor [Enabled] gphavagedstop [Enabled] gpireteonline [Enabled] gpkernel1 [Enabled] gprtclock [Enabled] gpsetprofile3 [Enabled] gpsetrestart [Enabled] dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait noibrs noibpb nopti nospectre_v2 nospectre_v1 l1tf=off nospec_store_bypass_disable no_stf_barrier mds=off mitigations=off maxcpus=2 isolcpus=1 nohz_full=1 rcu_nocbs=1 ############################### *** Scanning for playback devices *** Card 0, ID `DAC55688069', name `ADI-2 DAC (55688069)' Device 0, ID `USB Audio', name `USB Audio', 1 subdevices (1 available) 2 channels, sampling rate 44100..768000 Hz Sample formats: S32_LE Buffer size range from 16 to 131072 Period size range from 8 to 65536 Subdevice 0, name `subdevice #0' ############################### AUDIO CARDS CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 USB Audio card usb1 --> 2a39:3fd3 RME ADI-2 DAC card0 STATUS --> closed -------------------------------------------------------------------------------------------------------- Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 2.8G 25G 10% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 97M 276K 97M 1% /run shm tmpfs 484M 0 484M 0% /dev/shm /dev/mmcblk0p1 vfat 352M 219M 134M 63% /boot none tmpfs 12M 9.4M 2.0M 83% /bin none tmpfs 16M 13M 2.9M 81% /etc none tmpfs 9.7M 7.7M 2.0M 80% /sbin none tmpfs 35M 25M 11M 71% /lib none tmpfs 9.6M 8.5M 1.1M 90% /lib64 none tmpfs 414M 378M 37M 92% /usr none tmpfs 32M 2.6M 30M 8% /var none tmpfs 49M 0 49M 0% /tmp none tmpfs 77M 61M 16M 80% /opt none tmpfs 56M 6.1M 50M 11% /root [ OK ] Root access verified. ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 41'c : 105'f | Optimal temperature. Governor | powersave Current Freq Min Freq Max Freq CPU0 | 600 MHz 600 MHz 1200 MHz CPU1 | 600 MHz 600 MHz 1200 MHz CPU2 | 600 MHz 600 MHz 1200 MHz CPU3 | 600 MHz 600 MHz 1200 MHz [ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it. - if the temperature is not displayed, first run the command: sensors-detect --auto Does changing the governor and lowering the frequency of the cpu bring you benefits? It's something I never do, in my opinion it only increases latencies. GentooPlayer home Facebook Documentation Link to comment
Zauurx Posted October 19, 2020 Share Posted October 19, 2020 Howto mesure latencies ? ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
Zauurx Posted October 19, 2020 Share Posted October 19, 2020 I changed to max : 1200 and load GentooPlayer in ram. No clicks and no drope out. ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
antonellocaroli Posted October 19, 2020 Author Share Posted October 19, 2020 1 hour ago, Zauurx said: Howto mesure latencies ? there is software specially designed for testing... here are some examples on usb bridge: with governor set to performance (the last column is important) with governor powersave this with an RT kernel but sure latency has a certain importance in audio production, in reproduction instead it has never been demonstrated that it can be important, that's why my question, since many people tend to reduce the working frequency of the cpu, I wondered if it is done because we notice some improvements in listening? I don't think... GentooPlayer home Facebook Documentation Link to comment
antonellocaroli Posted October 20, 2020 Author Share Posted October 20, 2020 12 hours ago, antonellocaroli said: there is software specially designed for testing... here are some examples on usb bridge: with governor set to performance (the last column is important) with governor powersave this with an RT kernel but sure latency has a certain importance in audio production, in reproduction instead it has never been demonstrated that it can be important, that's why my question, since many people tend to reduce the working frequency of the cpu, I wondered if it is done because we notice some improvements in listening? I don't think... RT kernel with governor set to performance GentooPlayer home Facebook Documentation Link to comment
Zauurx Posted October 20, 2020 Share Posted October 20, 2020 Thanks for this (good) information... so, last question : Which RT Kernel for USBridge ? I've tested only your proposition (201012 Test). link above ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now