odelay Posted April 21, 2021 Share Posted April 21, 2021 6 hours ago, antonellocaroli said: how do you do it manually? with which command? I was just using your ‘Execute Command’ tab to put in: cpupower frequency-set -u 1000MHz You often add the option to enable at restarts for other features, so hoped you could do the same for commands we add. But perhaps there is a good reason why you haven’t allowed that option? But if you could, you’d make me very happy 🙂 TF cards - USB -> GentooPlayer in RAM on Rpi4b, Ian’s PurePi II, FIFO Q7, HDMI-pro -> Audio GD R-27 -> S.A.T. Infinity monoblocks -> Gallo Stradas + TR-3 sub / Erzetich Phobos Link to comment
antonellocaroli Posted April 21, 2021 Author Share Posted April 21, 2021 26 minutes ago, odelay said: I was just using your ‘Execute Command’ tab to put in: cpupower frequency-set -u You often add the option to enable at restarts for other features, so hoped you could do the same for commands we add. But perhaps there is a good reason why you haven’t allowed that option? But if you could, you’d make me very happy 🙂 cpupower has a configuration file in /etc/conf.d/cpupower nano /etc/conf.d/cpupower change it like this and then add cpupower at system start-up rc-update add cpupower default GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 21, 2021 Share Posted April 21, 2021 1 hour ago, antonellocaroli said: cpupower has a configuration file in /etc/conf.d/cpupower nano /etc/conf.d/cpupower change it like this and then add cpupower at system start-up rc-update add cpupower default can't this be done through Tweaks menu? Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 21, 2021 Author Share Posted April 21, 2021 55 minutes ago, DomieMic65 said: can't this be done through Tweaks menu? On Rpi, odelay talks about x86 PCs GentooPlayer home Facebook Documentation Link to comment
odelay Posted April 21, 2021 Share Posted April 21, 2021 2 hours ago, antonellocaroli said: cpupower has a configuration file in /etc/conf.d/cpupower nano /etc/conf.d/cpupower change it like this and then add cpupower at system start-up rc-update add cpupower default Grazie Filippo, I hoped there to be able to do it through your web interface as I currently don’t have a monitor attached (used to have a TV there for that...). I’ll try it if I can set a screen up. If you can think of a way to add such a feature in the future, I’d appreciate it. I thought others might have a need to run there scripts at boot, too? TF cards - USB -> GentooPlayer in RAM on Rpi4b, Ian’s PurePi II, FIFO Q7, HDMI-pro -> Audio GD R-27 -> S.A.T. Infinity monoblocks -> Gallo Stradas + TR-3 sub / Erzetich Phobos Link to comment
DomieMic65 Posted April 21, 2021 Share Posted April 21, 2021 29 minutes ago, antonellocaroli said: On Rpi, odelay talks about x86 PCs OK... I thought the menu is the same!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 21, 2021 Author Share Posted April 21, 2021 38 minutes ago, odelay said: Grazie Filippo, I hoped there to be able to do it through your web interface as I currently don’t have a monitor attached (used to have a TV there for that...). I’ll try it if I can set a screen up. If you can think of a way to add such a feature in the future, I’d appreciate it. I thought others might have a need to run there scripts at boot, too? why a monitor? you connect via ssh from another pc...or tablet...or mobil.... I will not add it to the webinterface because it does not work with all cpu.... GentooPlayer home Facebook Documentation Link to comment
Zsivjos Posted April 27, 2021 Share Posted April 27, 2021 On 4/2/2021 at 11:47 PM, saturdayboy said: according to the features section it looks like it does work for DSD files: https://www.marantz.com/en-us/product/cd-players/sakiruby Thanks! I guess it will be ok. I'm just waiting for a trial licence to find out. 😛 Link to comment
DomieMic65 Posted April 29, 2021 Share Posted April 29, 2021 @antonellocaroli Trying to update upmpdcli to latest version never completes ... It just remains stuck to a certain point for very long time! rpi3b+ , GP 5.1 Anything I can do? Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 29, 2021 Author Share Posted April 29, 2021 1 hour ago, DomieMic65 said: @antonellocaroli Trying to update upmpdcli to latest version never completes ... It just remains stuck to a certain point for very long time! rpi3b+ , GP 5.1 Anything I can do? try installing it from the shell MAKEOPTS="-j1" emerge --ask upmpdcli it will take a while but it won't get stuck. why do you want to update it? is the version you have installed not working well? DomieMic65 1 GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 29, 2021 Share Posted April 29, 2021 57 minutes ago, antonellocaroli said: try installing it from the shell MAKEOPTS="-j1" emerge --ask upmpdcli it will take a while but it won't get stuck. why do you want to update it? is the version you have installed not working well? it works OK ... just thought it would be good to have the latest version Thank you!!! antonellocaroli 1 Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
DomieMic65 Posted April 30, 2021 Share Posted April 30, 2021 Hey @antonellocaroli me again...😊 Any plans on adding Tidal connect to GP? Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 30, 2021 Author Share Posted April 30, 2021 4 hours ago, DomieMic65 said: Hey @antonellocaroli me again...😊 Any plans on adding Tidal connect to GP? No, until there are legal and open sources for the.... GentooPlayer home Facebook Documentation Link to comment
jeep972 Posted April 30, 2021 Share Posted April 30, 2021 "execute command" seems missing from the script ? Link to comment
antonellocaroli Posted May 1, 2021 Author Share Posted May 1, 2021 7 hours ago, jeep972 said: "execute command" seems missing from the script ? have you tried giving gp-update again? GentooPlayer home Facebook Documentation Link to comment
antonellocaroli Posted May 1, 2021 Author Share Posted May 1, 2021 Just now, antonellocaroli said: have you tried giving gp-update again and refresh the page? GentooPlayer home Facebook Documentation Link to comment
jeep972 Posted May 2, 2021 Share Posted May 2, 2021 Il y a 20 heures, antonellocaroli a déclaré: it's allright, thanks Link to comment
jeep972 Posted May 2, 2021 Share Posted May 2, 2021 13 hours ago, jeep972 said: tout va bien, merci I want to flash a new sd card. since v5.10-21 it's not possible to install hqplayerd. could you please check the build Link to comment
antonellocaroli Posted May 2, 2021 Author Share Posted May 2, 2021 2 minutes ago, jeep972 said: I want to flash a new sd card. since v5.10-21 it's not possible to install hqplayerd. could you please check the build on which system? GentooPlayer home Facebook Documentation Link to comment
jeep972 Posted May 2, 2021 Share Posted May 2, 2021 8 minutes ago, antonellocaroli said: sur quel système? allo usbridge signature Link to comment
jeep972 Posted May 3, 2021 Share Posted May 3, 2021 21 hours ago, antonellocaroli said: sur quel système? allo signature usbridge. No answer ? Link to comment
antonellocaroli Posted May 3, 2021 Author Share Posted May 3, 2021 1 hour ago, jeep972 said: allo signature usbridge. No answer ? I haven't had time to check yet, as soon as I can I'll let you know.... GentooPlayer home Facebook Documentation Link to comment
antonellocaroli Posted May 3, 2021 Author Share Posted May 3, 2021 5 hours ago, jeep972 said: allo signature usbridge. No answer ? it is not a problem with the ebuild... the problem is blocking an update, you should update glib first, if you want to do that: emerge --sync emerge -1 dev-libs/glib dev-util/gdbus-codegen emerge hqplayerd-bin GentooPlayer home Facebook Documentation Link to comment
jeep972 Posted May 5, 2021 Share Posted May 5, 2021 On 5/3/2021 at 12:58 PM, antonellocaroli said: it is not a problem with the ebuild... the problem is blocking an update, you should update glib first, if you want to do that: emerge --sync emerge -1 dev-libs/glib dev-util/gdbus-codegen emerge hqplayerd-bin done .but still impossible to install hqplayerd. could you please give me one good solution Link to comment
antonellocaroli Posted May 5, 2021 Author Share Posted May 5, 2021 1 hour ago, jeep972 said: done .but still impossible to install hqplayerd. could you please give me one good solution I just tried it on a 5.10 image and that solution works....sure you followed all the steps? GentooPlayer home Facebook Documentation Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now