antonellocaroli Posted April 13, 2021 Author Share Posted April 13, 2021 48 minutes ago, DomieMic65 said: well the two different output setting it seems that it is not so stable... often the HAT output does not work and needs reboot, and after I put the system un RAM the librespot out that was set to the HAT it falls back to USB you probably should have done a ramdiskreset... GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 9 minutes ago, antonellocaroli said: you probably should have done a ramdiskreset... I always do... now I can not use even when the system is not in ram ... librespot outputs to usb whatever the setting Sq.teR2 sees and plays from the HAT Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 13, 2021 Author Share Posted April 13, 2021 8 minutes ago, DomieMic65 said: now I can not use even when the system is not in ram ... librespot outputs to usb whatever the setting Sq.teR2 sees and plays from the HAT depends on how you configure them... post me the results of: aplay -l cat /etc/conf.d/squeezelite-R2 cat /etc/conf.d/librespot GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 29 minutes ago, antonellocaroli said: depends on how you configure them... post me the results of: aplay -l cat /etc/conf.d/squeezelite-R2 cat /etc/conf.d/librespot I configured R2 to HAT this time But librespot can't output to HAT even though I have set it to HAT Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 13, 2021 Author Share Posted April 13, 2021 3 minutes ago, DomieMic65 said: But librespot can't output to HAT even though I have set it to HAT you have not configured the audio output of librespot. GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 4 minutes ago, antonellocaroli said: you have not configured the audio output of librespot. it is not what is shown in the last screenshot? Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 13, 2021 Author Share Posted April 13, 2021 13 minutes ago, DomieMic65 said: it is not what is shown in the last screenshot? this screenshot tells me it's not configured...if you did it afterwards I don't know.... tells me that R2 is configured on the HAT and librespot is not configured. if you don't configure the audio output to librespot it always tries to use the default (which can also vary according to boot order). GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 9 minutes ago, antonellocaroli said: this screenshot tells me it's not configured...if you did it afterwards I don't know.... tells me that R2 is configured on the HAT and librespot is not configured. well I do not know what is going on but I configure it from the web interface but it does not accept the configuration that's why I gave the command multiple times after reconfiguring it Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 13, 2021 Author Share Posted April 13, 2021 1 minute ago, DomieMic65 said: well I do not know what is going on but I configure it from the web interface but it does not accept the configuration that's why I gave the command multiple times after reconfiguring it post me again cat /etc/conf.d/librespot GentooPlayer home Facebook Documentation Link to comment
antonellocaroli Posted April 13, 2021 Author Share Posted April 13, 2021 OK, I checked there's a bug in the librespot configuration script, that's why it didn't work for @Olaf test from terminal: cp -R /etc/shairport-sync.conf /etc/conf.d/librespot /etc/init.d/librespot restart DomieMic65 1 GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 2 hours ago, antonellocaroli said: OK, I checked there's a bug in the librespot configuration script, that's why it didn't work for @Olaf test from terminal: cp -R /etc/shairport-sync.conf /etc/conf.d/librespot /etc/init.d/librespot restart now it's OK hopefully it will be stable too!! can I put system in RAM now? Thank you! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted April 13, 2021 Author Share Posted April 13, 2021 9 minutes ago, DomieMic65 said: can I put system in RAM now? yes, always do a ramsystem reset DomieMic65 1 GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 18 minutes ago, antonellocaroli said: yes, always do a ramsystem reset I rarely forget😊 Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
bergui45 Posted April 13, 2021 Share Posted April 13, 2021 For me it's far more tricky to install than either RopieeXL or Volumio... I have downloaded the archive for Raspi4 and flash it with etcher Baleno... Obviously it's not the way to go since the Raspi4 still can see Ropie on 192.168.1.27 instead of Gentooplayer? Is it mandatory also to instal on the PC to get any chance to have a web interface working? Thank you in advance Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 1 hour ago, bergui45 said: For me it's far more tricky to install than either RopieeXL or Volumio... I have downloaded the archive for Raspi4 and flash it with etcher Baleno... Obviously it's not the way to go since the Raspi4 still can see Ropie on 192.168.1.27 instead of Gentooplayer? Is it mandatory also to instal on the PC to get any chance to have a web interface working? Thank you in advance if the installation went well when you put the ip to your browser you will see the web interface I admit I do not understand fully your post Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
bergui45 Posted April 13, 2021 Share Posted April 13, 2021 You said if the installation went well? How to know? I simply put the microSD card with the successfully flashed software on it... But i never could get connected in the browsser with the correct IP provided from angry scannerIP... So I'm stuck with this uneasy installation... Link to comment
DomieMic65 Posted April 13, 2021 Share Posted April 13, 2021 1 hour ago, bergui45 said: You said if the installation went well? How to know? I simply put the microSD card with the successfully flashed software on it... But i never could get connected in the browsser with the correct IP provided from angry scannerIP... So I'm stuck with this uneasy installation... do you use xxx.xxx.x.xx:5000 in the ip you use? did you see the documentation on the gentooplayer site? Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
bergui45 Posted April 14, 2021 Share Posted April 14, 2021 YES i used IP-GentooPlayer:5000...? and never could get anything...? So i checked also what's inside the microSD card: 2 partitions: No name with 369,1 MO Untitled with 15,21 GO I tried using either a MacBookPro 15" laptop or a Toshiba Z30 with Windows10 The Mac machine was wifi connected to the network while the Toshiba attached with an ethernet cable to an ethernet switch connected to my BOX... Let me know what was wrong? OK i had not yet asked for a License, because i want to test for free before... Link to comment
antonellocaroli Posted April 14, 2021 Author Share Posted April 14, 2021 15 minutes ago, bergui45 said: YES i used IP-GentooPlayer:5000...? and never could get anything...? So i checked also what's inside the microSD card: 2 partitions: No name with 369,1 MO Untitled with 15,21 GO I tried using either a MacBookPro 15" laptop or a Toshiba Z30 with Windows10 The Mac machine was wifi connected to the network while the Toshiba attached with an ethernet cable to an ethernet switch connected to my BOX... Let me know what was wrong? OK i had not yet asked for a License, because i want to test for free before... have you tried restarting the router? can you show a picture of the browser when you try to connect? GentooPlayer home Facebook Documentation Link to comment
bergui45 Posted April 14, 2021 Share Posted April 14, 2021 Hi Antonello, What a pleasure to have you so quiskly answering! I saw in the how to install that the web interface works only on PC or Tablet!? so typing ssh root@ip-Gentooplayer on my Mac laptop will never give me ssh [email protected]??? Yesterday when trying to do that The Mac was not linked by Ethernet cable to the network... I also tried on the PC linked by cable to the network using Putty with no success also...? Link to comment
DomieMic65 Posted April 14, 2021 Share Posted April 14, 2021 1 hour ago, bergui45 said: Hi Antonello, What a pleasure to have you so quiskly answering! I saw in the how to install that the web interface works only on PC or Tablet!? so typing ssh root@ip-Gentooplayer on my Mac laptop will never give me ssh [email protected]??? Yesterday when trying to do that The Mac was not linked by Ethernet cable to the network... I also tried on the PC linked by cable to the network using Putty with no success also...? you must only put xxx.xxx.x.x..x:5000 to your browser SSH is another thing you need ethernet (for starting) for the rpi not the computer ... the computer will go to the web interface regardless wifi or ethernet Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
bergui45 Posted April 14, 2021 Share Posted April 14, 2021 Domiemic65 said you must only put xxx.xxx.x.x..x:5000 to your browser of course we tried with Antonello while taking Timeviewer control on my PC... I may have a network issue or my micro SD Card had an issue wth Etcher flashing it on the PC...? Link to comment
DomieMic65 Posted April 14, 2021 Share Posted April 14, 2021 43 minutes ago, bergui45 said: Domiemic65 said you must only put xxx.xxx.x.x..x:5000 to your browser of course we tried with Antonello while taking Timeviewer control on my PC... I may have a network issue or my micro SD Card had an issue wth Etcher flashing it on the PC...? OK.. if antonello is taking care of the issue it will be solved!! checking out👋 Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
bergui45 Posted April 14, 2021 Share Posted April 14, 2021 So i tried to erase the microSD Card and reflashed GentoPlayerRpi4-64-5.10.img.xz But Holy sh... I'm still unable to get 192.168.42.1:5000 in my browser... What else now? Link to comment
stefano_mbp Posted April 14, 2021 Share Posted April 14, 2021 2 minutes ago, bergui45 said: 192.168.42.1 Are you sure about the IP address ? ... download Fing https://www.fing.com/products and look for the correct IP address ... usually xxx.xxx.xxx.1 is the router address Stefano My audio system Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now