nbpf Posted March 15, 2020 Share Posted March 15, 2020 9 minutes ago, antonellocaroli said: I don't reproduce the two problems... 1) did you overwrite the configuration file of upmpdcli? with etc-update? 2) does not change from 2.10 to 2.11 1) No, but I have manually set "friendlyname = UpMpd (rpi6 sala)" and "ohproductroom = UpMpd (rpi6 sala)" as I had done in 2.0 2) The problem is within 2.11. It seems that some other action (e.g. enabling upmpdcli or re-selecting a DAC) overwrites the cpufraqmax settings I'll try to flash the image again, restart from scratch and report my findings. Thanks for your support! Link to comment
antonellocaroli Posted March 15, 2020 Author Share Posted March 15, 2020 10 minutes ago, nbpf said: 2) The problem is within 2.11. It seems that some other action (e.g. enabling upmpdcli or re-selecting a DAC) overwrites the cpufraqmax settings the only one that overrides them and returns them to default values is "select dac". but it's the same for both 2.10 and 2.11. GentooPlayer home Facebook Documentation Link to comment
nbpf Posted March 15, 2020 Share Posted March 15, 2020 17 minutes ago, antonellocaroli said: the only one that overrides them and returns them to default values is "select dac". but it's the same for both 2.10 and 2.11. Ok, then issue 2) is resolved. I still have the problem that upmpdcli is not visible in my network in 2.11. In 2.0 it works fine and I have not tried it in 2.10. Link to comment
antonellocaroli Posted March 15, 2020 Author Share Posted March 15, 2020 13 minutes ago, nbpf said: Ok, then issue 2) is resolved. I still have the problem that upmpdcli is not visible in my network in 2.11. In 2.0 it works fine and I have not tried it in 2.10. I don't know... I'm just using it right now... I don't know... I'm just using it right now... It would be interesting to see if others have the same problem... GentooPlayer home Facebook Documentation Link to comment
Branko Posted March 15, 2020 Share Posted March 15, 2020 Hello, today got Shairport-sync to work (BBB; Botic Kernel) with exceptional help from Antonello Caroli. Now I can stream with airplay any music perfectly. Thank you a lot Branko Link to comment
askat1988 Posted March 16, 2020 Share Posted March 16, 2020 9 hours ago, nbpf said: Ok, then issue 2) is resolved. I still have the problem that upmpdcli is not visible in my network in 2.11. In 2.0 it works fine and I have not tried it in 2.10. Maybe my problem is the same. Almost every time I restart I have to disable and then enable upmpdcli before it shows up and I am not in RAM mode. This is with Rpi4. My Setup: http://www.head-fi.org/user/blubliss Link to comment
antonellocaroli Posted March 16, 2020 Author Share Posted March 16, 2020 @askat1988 @nbpf can you try changing the upmpd door? ex: GentooPlayer home Facebook Documentation Link to comment
askat1988 Posted March 16, 2020 Share Posted March 16, 2020 I tried this and upnp showed up after one reboot (which sometimes does work) but not after entering RAM mode 4. I had to disable then enable to make it show up. My Setup: http://www.head-fi.org/user/blubliss Link to comment
antonellocaroli Posted March 16, 2020 Author Share Posted March 16, 2020 4 minutes ago, askat1988 said: I tried this and upnp showed up after one reboot (which sometimes does work) but not after entering RAM mode 4. I had to disable then enable to make it show up. before you tried the ramdisk, did you do a ramdiskreset? GentooPlayer home Facebook Documentation Link to comment
Boring Posted March 16, 2020 Share Posted March 16, 2020 I there is sparky version that supports WIFI? I have the older USBridge and plan to put a USB WIFI dongle on it. Thanks! Link to comment
antonellocaroli Posted March 16, 2020 Author Share Posted March 16, 2020 52 minutes ago, Boring said: I there is sparky version that supports WIFI? I have the older USBridge and plan to put a USB WIFI dongle on it. Thanks! I don't think so, but you can try.... GentooPlayer home Facebook Documentation Link to comment
askat1988 Posted March 16, 2020 Share Posted March 16, 2020 12 hours ago, antonellocaroli said: before you tried the ramdisk, did you do a ramdiskreset? Yes, I always do that and a clean. My Setup: http://www.head-fi.org/user/blubliss Link to comment
antonellocaroli Posted March 16, 2020 Author Share Posted March 16, 2020 11 minutes ago, askat1988 said: Yes, I always do that and a clean. can you post the system-info for me? so I put myself in the same situation, I can't reproduce the problem in my system... GentooPlayer home Facebook Documentation Link to comment
askat1988 Posted March 17, 2020 Share Posted March 17, 2020 5 hours ago, antonellocaroli said: can you post the system-info for me? so I put myself in the same situation, I can't reproduce the problem in my system... _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ #Profile1 Profile: Profile1 RamSystem: Mode 4 Free memory: 3063MB of total 3854MB Kernel: 4.19.97-GentooPlayer-RT-MIN-NOGRAPH-EUP100RCU-rt38+ ─────────────────────────────────────── GentooPlayer | 01:17 | mar 17/03/2020 ─────────────────────────────────────── v2.11 | Raspberry Pi 4B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.82 ─────────────────────────────────────── Players Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Disabled] LigitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Enabled] UpMpdCli [Enabled] RoonBridge [Enabled] RoonServer [Disabled] Mpd-Sima [Disabled] MYmpd [Disabled] minimserver [Disabled] shairport-sync [Disabled] *** Scanning for playback devices *** Card 0, ID `USB', name `Schiit Yggdrasil Unison USB' Device 0, ID `USB Audio', name `USB Audio', 1 subdevices (1 available) 2 channels, sampling rate 44100..192000 Hz Sample formats: S16_LE, S32_LE, S24_3LE Buffer size range from 16 to 262144 Period size range from 8 to 131072 Subdevice 0, name `subdevice #0' AUDIO CARDS CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 USB Audio card usb1 --> 30be:1001 Schiit Audio Schiit card0 STATUS --> closed -------------------------------------------------------------------------------------------------------- Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 6.8G 3.8G 2.7G 59% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 386M 272K 386M 1% /run shm tmpfs 1.9G 12K 1.9G 1% /dev/shm none tmpfs 12M 9.4M 2.0M 83% /bin none tmpfs 15M 12M 2.9M 80% /etc none tmpfs 9.5M 7.6M 2.0M 80% /sbin none tmpfs 47M 37M 11M 78% /lib none tmpfs 9.5M 8.5M 1.1M 90% /lib64 none tmpfs 464M 427M 37M 93% /usr none tmpfs 33M 2.9M 30M 9% /var none tmpfs 4.9M 0 4.9M 0% /tmp none tmpfs 77M 62M 16M 80% /opt none tmpfs 52M 2.4M 49M 5% /root [ OK ] Root access verified. ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 56'c : 132'f | Running warm, but safe. Governor | performance Current Freq Min Freq Max Freq CPU0 | 1500 MHz 600 MHz 1500 MHz CPU1 | 1500 MHz 600 MHz 1500 MHz CPU2 | 1500 MHz 600 MHz 1500 MHz CPU3 | 1500 MHz 600 MHz 1500 MHz [ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it. - if the temperature is not displayed, first run the command: sensors-detect --auto My Setup: http://www.head-fi.org/user/blubliss Link to comment
nbpf Posted March 17, 2020 Share Posted March 17, 2020 @antonellocaroli, @askat1988: I have now reinstalled 2.10 from scratch, updated to 2.11 and then setup my system (included upmpdcli.conf edits) in 2.11. Everything works now as expected. It is conceivable that the upmpdcli problems that I have reported in my previous posts might have to do with the fact that, in my previous attempt, I had first set up my system in 2.10 and then updated to 2.11. It is of course possible that I had done something wrong. Here is my system info: Profile: Profile not Setting RamSystem: Ramsystem not enabled Free memory: 897MB of total 968MB Kernel: 4.19.97-GentooPlayer-ST+ ─────────────────────────────────────── GentooPlayer | 12:04 | mar 17/03/2020 ─────────────────────────────────────── v2.11 | Raspberry Pi 3B/3B+ (aarch64) ─────────────────────────────────────── wlan0 | 192.168.178.50 ─────────────────────────────────────── Players Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Disabled] LigitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Enabled] UpMpdCli [Enabled] RoonBridge [Disabled] RoonServer [Disabled] Mpd-Sima [Disabled] MYmpd [Disabled] minimserver [Disabled] shairport-sync [Disabled] *** Scanning for playback devices *** Card 0, ID `sndallodigione', name `snd_allo_digione' Device 0, ID `Allo DigiOne HiFi wm8804-spdif-0', name `Allo DigiOne HiFi wm8804-spdif-0', 1 subdevices (1 available) 2 channels, sampling rate 32000..192000 Hz Sample formats: S16_LE, S24_LE Buffer size range from 64 to 131072 Period size range from 32 to 65536 Subdevice 0, name `subdevice #0' AUDIO CARDS CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 Internal Audio card card0 --> -- Allo DigiOne HiFi card0 STATUS --> closed -------------------------------------------------------------------------------------------------------- Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 14G 3.1G 11G 24% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 97M 264K 97M 1% /run cgroup_root tmpfs 10M 0 10M 0% /sys/fs/cgroup shm tmpfs 485M 0 485M 0% /dev/shm [ OK ] Root access verified. ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 44'c : 111'f | Optimal temperature. Governor | performance Current Freq Min Freq Max Freq CPU0 | 1000 MHz 1000 MHz 1000 MHz CPU1 | 1000 MHz 1000 MHz 1000 MHz CPU2 | 1000 MHz 1000 MHz 1000 MHz CPU3 | 1000 MHz 1000 MHz 1000 MHz [ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it. - if the temperature is not displayed, first run the command: sensors-detect --auto Link to comment
DomieMic65 Posted March 19, 2020 Share Posted March 19, 2020 @antonellocaroli Is it possible to update to LMS 8.0.0? Do you recommend it or it's a bit soon? Thnx!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted March 19, 2020 Author Share Posted March 19, 2020 6 hours ago, DomieMic65 said: @antonellocaroli Is it possible to update to LMS 8.0.0? Do you recommend it or it's a bit soon? Thnx!! It's a beta version... but if you want to try it, you have to take out the 7.9. emerge -C logitechmediaserver-bin and install the 8 emerge --ask logitechemediaserver-beta GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted March 19, 2020 Share Posted March 19, 2020 Just now, antonellocaroli said: It's a beta version... but if you want to try it, you have to take out the 7.9. emerge -C logitechmediaserver-bin and install the 8 emerge --ask logitechemediaserver-beta thank you this means that I will have to configure from the beginning? Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted March 19, 2020 Author Share Posted March 19, 2020 3 minutes ago, DomieMic65 said: thank you this means that I will have to configure from the beginning? probably not, you have to try ... I do not know ... unfortunately I do not have time to check everything ... GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted March 19, 2020 Share Posted March 19, 2020 1 minute ago, antonellocaroli said: probably not, you have to try ... I do not know ... unfortunately I do not have time to check everything ... Yes of course! I absolutely understand! Thank you once more!! Those #stayathome days your work is a grate way to get lost in music and leave this tragic situation behind for a while!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted March 19, 2020 Author Share Posted March 19, 2020 21 minutes ago, DomieMic65 said: Yes of course! I absolutely understand! Thank you once more!! Those #stayathome days your work is a grate way to get lost in music and leave this tragic situation behind for a while!! I asked for a step... emerge -C logitechmediaserver-bin echo "media-sound/logitechmediaserver-beta logitechmediaserver-beta" >> /etc/portage/package.license/my_license emerge --ask logitechemediaserver-beta GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted March 23, 2020 Share Posted March 23, 2020 I have shut down ( "shutd" ) properly my RPi but then it doesn't boot up again! Usually I have it run all the time and I it has rebooted many many times but after the shutd it doesn't work! I do not remember exactly but 99% it was not in ramsystem mode! As far as LMS 8.0 I decided not to install it yet! All the best to all and stay safe (in home)!!!!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted March 23, 2020 Author Share Posted March 23, 2020 8 minutes ago, DomieMic65 said: I have shut down ( "shutd" ) properly my RPi but then it doesn't boot up again! Usually I have it run all the time and I it has rebooted many many times but after the shutd it doesn't work! I do not remember exactly but 99% it was not in ramsystem mode! As far as LMS 8.0 I decided not to install it yet! All the best to all and stay safe (in home)!!!!! I never turn my rpi off regularly, I've always just turned the power off and never had any problems... You sure you weren't using the ramsystem? if you were using the ramsystem and LMS probably doesn't start for full memory... There´s a function made to avoid this, which is to move the lms cache. I´ve tried version 8 of LMS and it seems to work fine... DomieMic65 1 GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted March 23, 2020 Share Posted March 23, 2020 23 minutes ago, antonellocaroli said: I never turn my rpi off regularly, I've always just turned the power off and never had any problems... You sure you weren't using the ramsystem? if you were using the ramsystem and LMS probably doesn't start for full memory... There´s a function made to avoid this, which is to move the lms cache. I´ve tried version 8 of LMS and it seems to work fine... I didn't shut down the RPi4 I use for LMS. I shut the one I use for player (3B+) No I am not 100% sure I If I was on ramsystem or not! LMS was not enabled though! On my RPi4 (LMS) I have moved the cache! Great for LMS 8 I might give it a try! Thank you!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
Gavin1977 Posted March 23, 2020 Share Posted March 23, 2020 Hi - using web interface I now get the following error when executing any script Calling the script... Internal Server Error I have restarted the NUC and checked network connect - any ideas? Playback still works fine. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now