PavelDosko Posted June 27, 2023 Share Posted June 27, 2023 Last week I bought a Lumin U2 streamer (NOT mini). The Lumin application did not interest me after my experience with the JPLAY iOS app, it is confusing, it is a pain to create local playlists, there is no Qobuz information about the artist and the album, it takes a long time to load albums, etc., etc. That is why I tried the JPLAY iOS app, which I have purchased - everything is OK, but I often get the message "Renderer in transition" and I can't move on ... what about it? Link to comment
stefano_mbp Posted June 27, 2023 Share Posted June 27, 2023 43 minutes ago, PavelDosko said: often get the message "Renderer in transition" and I can't move on Can you post a screenshot of that message? … and the renderer settings Stefano My audio system Link to comment
PavelDosko Posted June 27, 2023 Share Posted June 27, 2023 Hello, I will send in the evening, now I am at work Regards Link to comment
Marcin_gps Posted June 27, 2023 Share Posted June 27, 2023 5 hours ago, PavelDosko said: Last week I bought a Lumin U2 streamer (NOT mini). The Lumin application did not interest me after my experience with the JPLAY iOS app, it is confusing, it is a pain to create local playlists, there is no Qobuz information about the artist and the album, it takes a long time to load albums, etc., etc. That is why I tried the JPLAY iOS app, which I have purchased - everything is OK, but I often get the message "Renderer in transition" and I can't move on ... what about it? Please check in the Lumin app that you have UPnP/DLNA mode enabled JPLAY & JCAT Founder Link to comment
al210 Posted June 27, 2023 Share Posted June 27, 2023 6 hours ago, PavelDosko said: Last week I bought a Lumin U2 streamer (NOT mini). The Lumin application did not interest me after my experience with the JPLAY iOS app, it is confusing, it is a pain to create local playlists, there is no Qobuz information about the artist and the album, it takes a long time to load albums, etc., etc. That is why I tried the JPLAY iOS app, which I have purchased - everything is OK, but I often get the message "Renderer in transition" and I can't move on ... what about it? I have the Lumin U1 and get this same error quite often. I have to remove all songs from the playlist in JPLAY to continue. Also when my Playlist is finished JPLAY will randomly play 1 song from my local library. ?? Sonictransport i9, DCS Bartok Apex DAC/Streamer REL Acoustics S/510 Sub Woofer Audionet Watt Integrated Amp - Vivid Audio Kaya 45 loudspeakers Link to comment
stefano_mbp Posted June 27, 2023 Share Posted June 27, 2023 1 hour ago, al210 said: I have the Lumin U1 and get this same error quite often. I have to remove all songs from the playlist in JPLAY to continue. Also when my Playlist is finished JPLAY will randomly play 1 song from my local library. ?? Be sure you don’t have any other upnp app active in background … Stefano My audio system Link to comment
PavelDosko Posted June 27, 2023 Share Posted June 27, 2023 So ... UPNP on Lumin app is ON, no other UPNP application than JPLAY is not active - Thank you for some advise Link to comment
stefano_mbp Posted June 27, 2023 Share Posted June 27, 2023 25 minutes ago, PavelDosko said: So ... UPNP on Lumin app is ON, no other UPNP application than JPLAY is not active - Thank you for some advise What if you check “Safe transition mode”? Stefano My audio system Link to comment
stefano_mbp Posted June 27, 2023 Share Posted June 27, 2023 2 hours ago, PavelDosko said: ... result - Better to ask @Marcin_gps and/or @wklie PavelDosko 1 Stefano My audio system Link to comment
wklie Posted June 28, 2023 Share Posted June 28, 2023 10 hours ago, PavelDosko said: So ... UPNP on Lumin app is ON, no other UPNP application than JPLAY is not active In Lumin app, make sure Re-sampling setting is OFF. In case you're using a very old or unusual DAC that does not support 192kHz, let me know what it is. Make sure your setup works with Lumin app first. Kill JPlay app, and relaunch it. Peter Lie LUMIN Firmware Lead Link to comment
PavelDosko Posted June 28, 2023 Share Posted June 28, 2023 Hello, - my setup works with the Lumin app without any problems - the cause of problems with JPLAY was oversampling enabled in the Lumin app Hopefully in time I will get used to the Lumin app and have the option of resampling, web radio and Leedh processing So far, I am missing Qobuz information about the album and artist in the Lumin app, complicated adding one song to the playlist, slower responses, lack of clarity on the page on the iPad, recently played list, monthly lists of albums played, etc. My setup SFP - Lumin U2 - DAC Rockna Wavedream XLR - passive preamp Big Hattor - amp Simaudio Moon W8. Thanks everyone for the advice Link to comment
al210 Posted July 30, 2023 Share Posted July 30, 2023 I hope someone can help me. I'm trying to get Jplay to work as my control point using Minimserver and HQ player embedded on my Sonictransporter i9. Minimserver is fine and my library is in Jplay app. I installed HQplayer embedded on the Sonictransporter. HQplayer embedded sees my Optical Rendu/Holo may DAC endpoint on the backend. I changed no other settings. I have SonicTransporter:SignalystHQPlayer4 selected in JPlay as my renderer but get an "error sending action to renderer" on Jplay when I try to play a track. Sonictransport i9, DCS Bartok Apex DAC/Streamer REL Acoustics S/510 Sub Woofer Audionet Watt Integrated Amp - Vivid Audio Kaya 45 loudspeakers Link to comment
stefano_mbp Posted July 30, 2023 Share Posted July 30, 2023 44 minutes ago, al210 said: have SonicTransporter:SignalystHQPlayer4 selected in JPlay as my renderer but get an "error sending action to renderer" on Jplay when I try to play a track. Try to swipe off JPlay and restart it Stefano My audio system Link to comment
al210 Posted July 30, 2023 Share Posted July 30, 2023 8 minutes ago, stefano_mbp said: Try to swipe off JPlay and restart it I restarted my Sonictransporter so I'm within the 30 minute limit of HQ player trial. I swiped off the Jplay as suggested and restarted it but get the same error. I even restarted my iPad but still get same error. Sonictransport i9, DCS Bartok Apex DAC/Streamer REL Acoustics S/510 Sub Woofer Audionet Watt Integrated Amp - Vivid Audio Kaya 45 loudspeakers Link to comment
stefano_mbp Posted July 30, 2023 Share Posted July 30, 2023 7 minutes ago, al210 said: I restarted my Sonictransporter so I'm within the 30 minute limit of HQ player trial. I swiped off the Jplay as suggested and restarted it but get the same error. I even restarted my iPad but still get same error. Check if your settings are like the screenshot Stefano My audio system Link to comment
al210 Posted July 30, 2023 Share Posted July 30, 2023 2 minutes ago, stefano_mbp said: Check if your settings are like the screenshot Yes they are but I got it working. I deleted the Jplay app and data and reinstalled from scratch. Now working. Sonictransport i9, DCS Bartok Apex DAC/Streamer REL Acoustics S/510 Sub Woofer Audionet Watt Integrated Amp - Vivid Audio Kaya 45 loudspeakers Link to comment
stefano_mbp Posted July 30, 2023 Share Posted July 30, 2023 Just now, al210 said: Yes they are but I got it working. I deleted the Jplay app and data and reinstalled from scratch. Now working. 👍 Stefano My audio system Link to comment
clark8888 Posted August 14, 2023 Share Posted August 14, 2023 On 7/31/2023 at 2:41 AM, al210 said: I hope someone can help me. I'm trying to get Jplay to work as my control point using Minimserver and HQ player embedded on my Sonictransporter i9. Minimserver is fine and my library is in Jplay app. I installed HQplayer embedded on the Sonictransporter. HQplayer embedded sees my Optical Rendu/Holo may DAC endpoint on the backend. I changed no other settings. I have SonicTransporter:SignalystHQPlayer4 selected in JPlay as my renderer but get an "error sending action to renderer" on Jplay when I try to play a track. JPlay IOS can not stream Tidal to HQPlayer Embedded by upnp (with red alarm: error sending action to renderer). JPlay IOS can only stream Qobuz to HQPlayer Embedded by upnp. BTW, Mconnect can stream both to HQPlayer Embedded. Link to comment
clark8888 Posted August 15, 2023 Share Posted August 15, 2023 16 hours ago, clark8888 said: JPlay IOS can not stream Tidal to HQPlayer Embedded by upnp (with red alarm: error sending action to renderer). JPlay IOS can only stream Qobuz to HQPlayer Embedded by upnp. BTW, Mconnect can stream both to HQPlayer Embedded. modify: JPlay IOS can not stream Tidal to HQPlayer Embedded 4 by upnp (with red alarm: error sending action to renderer). JPlay IOS can stream Tidal and Qobuz to HQPlayer Embedded 5 by upnp. BTW, Mconnect can stream both to HQPlayer Embedded 4 and 5. Link to comment
Markus8 Posted November 30, 2023 Share Posted November 30, 2023 I am intending to switch from Roon to Jplay but would need a convolution filter. How can this be done? Link to comment
The Computer Audiophile Posted November 30, 2023 Author Share Posted November 30, 2023 1 minute ago, Markus8 said: I am intending to switch from Roon to Jplay but would need a convolution filter. How can this be done? Currently there are zero good options. I wish MinimServer could integrate a convolution engine. Markus8 1 Founder of Audiophile Style | My Audio Systems Link to comment
Markus8 Posted November 30, 2023 Share Posted November 30, 2023 @Marcin_gps Do you think about an integration possibility ? Link to comment
stefano_mbp Posted November 30, 2023 Share Posted November 30, 2023 33 minutes ago, The Computer Audiophile said: wish MinimServer could integrate a convolution engine. It already does, MinimStreamer is needed … I don’t use it and it is a bit … cryptic but you can ask Simon on his Minimserver forum Stefano My audio system Link to comment
Markus8 Posted November 30, 2023 Share Posted November 30, 2023 3 minutes ago, stefano_mbp said: It already does … I don’t use it and it is a bit … cryptic but you can ask Simon on his Minimserver forum In general good news, though „cryptic“ doesn’t sound that inviting 😅 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now