the_bat Posted August 12, 2019 Share Posted August 12, 2019 12 hours ago, Ralf11 said: I've seen the schematic online; was wondering if anyone here has built it (can post in another thread if a digression) The insulation and layout constraints because of the lethal (1200V+) voltages inside mean this isn't a project for any but the most skilled - or foolhardy - DIYer. I'm sure most people knew that, but.... Link to comment
accwai Posted August 12, 2019 Share Posted August 12, 2019 28 minutes ago, the_bat said: The insulation and layout constraints because of the lethal (1200V+) voltages inside mean this isn't a project for any but the most skilled - or foolhardy - DIYer. I'm sure most people knew that, but.... You've probably underestimated the experts hanging out here on AS. Question: Where would one source all the heavy duty silver for a DIY Ongaku project? Or are those just audiophile bling and can be skipped? Link to comment
Ralf11 Posted August 12, 2019 Share Posted August 12, 2019 Yes, the PS does involve kV's I'm not sure that silver is required. This is an ultimate Japanese product, so they typically go all out in every factor (not just for audio). They do (or did) sell various parts for people who want to DIY. Link to comment
accwai Posted August 13, 2019 Share Posted August 13, 2019 17 hours ago, Ralf11 said: [...] I'm not sure that silver is required. This is an ultimate Japanese product, so they typically go all out in every factor (not just for audio). They do (or did) sell various parts for people who want to DIY. Thanks for the clarification. But isn't the Ongaku only like mid-tier in the Kondo line up, and the heavy silver stuff goes almost all the way to the bottom tier? And Kondo isn't even the craziest of the Japanese manufacturers. Look at the top tier Zanden that's only known by Kanji names 仁風 🠖 宙光 🠖 長空 /火雲 As for making parts available, isn't that from Audio Note UK, which was split from Kondo in a brutal fight and was declared to have nothing to do with Kondo? Link to comment
miguelito Posted August 13, 2019 Share Posted August 13, 2019 6 minutes ago, accwai said: Thanks for the clarification. But isn't the Ongaku is only like mid-tier in the Kondo line up, and the heavy silver stuff goes almost all the way to the bottom tier? And Kondo isn't even the craziest of the Japanese manufacturers. Look at the top tier Zanden that's only known by Kanji names 仁風 🠖 宙光 🠖 長空 /火雲 As for making parts available, isn't that from Audio Note UK, which was split from Kondo in a brutal fight and was declared to have nothing to do with Kondo? The full Kondo lineup is on their website, so there is no point in explaining here. Yes, Audio Note UK is the shop that has components. I don't think you can buy all of the pieces to make an Ongaku or similar. NUC10i7 + Roon ROCK > dCS Rossini APEX DAC + dCS Rossini Master Clock SME 20/3 + SME V + Dynavector XV-1s or ANUK IO Gold > vdH The Grail or Kondo KSL-SFz + ANK L3 Phono Audio Note Kondo Ongaku > Avantgarde Duo Mezzo Signal cables: Kondo Silver, Crystal Cable phono Power cables: Kondo, Shunyata, van den Hul system pics Link to comment
Popular Post miguelito Posted August 13, 2019 Popular Post Share Posted August 13, 2019 16 hours ago, Ralf11 said: I'm not sure that silver is required. Define "required", especially on this forum... botrytis and The Computer Audiophile 2 NUC10i7 + Roon ROCK > dCS Rossini APEX DAC + dCS Rossini Master Clock SME 20/3 + SME V + Dynavector XV-1s or ANUK IO Gold > vdH The Grail or Kondo KSL-SFz + ANK L3 Phono Audio Note Kondo Ongaku > Avantgarde Duo Mezzo Signal cables: Kondo Silver, Crystal Cable phono Power cables: Kondo, Shunyata, van den Hul system pics Link to comment
botrytis Posted August 13, 2019 Share Posted August 13, 2019 @miguelito Stunning system and thanks for sharing miguelito 1 Current: Daphile on an AMD A10-9500 with 16 GB RAM DAC - TEAC UD-501 DAC Pre-amp - Rotel RC-1590 Amplification - Benchmark AHB2 amplifier Speakers - Revel M126Be with 2 REL 7/ti subwoofers Cables - Tara Labs RSC Reference and Blue Jean Cable Balanced Interconnects Link to comment
Popular Post miguelito Posted January 1, 2021 Popular Post Share Posted January 1, 2021 Hi all, Pedro Garcia interviewed me for his spanish-language "De Audiofilos Y Locos" Youtube channel. The interview is (obviously) in spanish: pas and Jeff_N 1 1 NUC10i7 + Roon ROCK > dCS Rossini APEX DAC + dCS Rossini Master Clock SME 20/3 + SME V + Dynavector XV-1s or ANUK IO Gold > vdH The Grail or Kondo KSL-SFz + ANK L3 Phono Audio Note Kondo Ongaku > Avantgarde Duo Mezzo Signal cables: Kondo Silver, Crystal Cable phono Power cables: Kondo, Shunyata, van den Hul system pics Link to comment
fas42 Posted January 1, 2021 Share Posted January 1, 2021 Nice one ... starting to watch - the subtitle, and auto-translate functions in YT work well enough to follow the conversation. miguelito 1 Link to comment
fas42 Posted January 1, 2021 Share Posted January 1, 2021 Haven't finished watching the video, but one thing I noticed, which I will mention, if I may ... I would never, never, coil up the speaker cable like you have on one side - for me, it would kill the quality, stone dead. With your highly specialised amplifier it may not in fact be an issue - but I would certainly not have this on my own system. Link to comment
miguelito Posted January 1, 2021 Share Posted January 1, 2021 39 minutes ago, fas42 said: Haven't finished watching the video, but one thing I noticed, which I will mention, if I may ... I would never, never, coil up the speaker cable like you have on one side - for me, it would kill the quality, stone dead. With your highly specialised amplifier it may not in fact be an issue - but I would certainly not have this on my own system. I thought about that, but the inductance from that is minimal. There is so much detail like that that I am willing to deal with... :) NUC10i7 + Roon ROCK > dCS Rossini APEX DAC + dCS Rossini Master Clock SME 20/3 + SME V + Dynavector XV-1s or ANUK IO Gold > vdH The Grail or Kondo KSL-SFz + ANK L3 Phono Audio Note Kondo Ongaku > Avantgarde Duo Mezzo Signal cables: Kondo Silver, Crystal Cable phono Power cables: Kondo, Shunyata, van den Hul system pics Link to comment
fas42 Posted January 1, 2021 Share Posted January 1, 2021 3 minutes ago, miguelito said: I thought about that, but the inductance from that is minimal. There is so much detail like that that I am willing to deal with... :) For an experiment, I would, temporarily, uncoil that cable, and have it follow a path on the floor that mimics that of the other side - say, have it go out into the room so that it has largely a path with minimal curves, and doesn't cross over, or lie adjacent to itself at any point. Yes, unsightly, but it's purely an exercise to see if it makes an audible difference ... miguelito 1 Link to comment
ASRMichael Posted January 2, 2021 Share Posted January 2, 2021 @miguelito Congratulations on having such a beautiful home & audio system. Most importantly for me was seeing how engaged you are with listening to music, after all that’s what it’s all about.... It’s nice to see another member using Symposium platforms! like myself I use them in my whole system to great affect. I actually use Symposium Rollerblocks under the symposium platforms for my speakers. As I write this post I was saying to myself; We/I spend so much time reading through audiophile forums on a daily basis, so seeing a video with fellow audiophile is so refreshing. Thanks again miguelito 1 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now