antonellocaroli Posted March 2 Author Share Posted March 2 3 minutes ago, chrisc said: Does not work like that 1st screen - Click on List Kernel, this appears Have I missed a step? what's not working? you must select a kernel and click EXCUTE... GentooPlayer home Facebook Documentation Link to comment
Audiophily Posted March 2 Share Posted March 2 2 hours ago, chrisc said: How do you install Kernel 6.7.6? I see it on the list and choose it. It seems to go through the motions and then, doing a check of the Home System, there has been no upgrade at all Here the first portion of the Home System you must first go to update/install/remove and in kernel New select the new kernel and wait for it to complete the installation (5min). Next you select the version of this kernel that you like the most. Link to comment
chrisc Posted March 2 Share Posted March 2 Yes, did exactly that But looking at Home System, I would expect it to show 6.7.6 and not 6.6.2. Or am I mistaken? The Cape Town Hi-Fi Club. Achieve astonishing sound Listening stuff: Mercury Pi2, Devialet 440CI, REL sub, ML Electromotion, 2 x Dachshunds Link to comment
antonellocaroli Posted March 2 Author Share Posted March 2 33 minutes ago, chrisc said: Yes, did exactly that But looking at Home System, I would expect it to show 6.7.6 and not 6.6.2. Or am I mistaken? if you have anydesk, write me in private with the ID GentooPlayer home Facebook Documentation Link to comment
Ikyo Posted March 3 Share Posted March 3 Hello All, My first kernel test and approval was : Target : 6.7.6-ULTRA-EUP-RCU-CLTO-TEST+ Host : 6.7.6-RT-ULTRA-EUP-NOR-CLTO-TEST+ It's interesting to note, that on my system, before going to DIRETTA, the RT Kernels gave a too hard sound in the mids and highs. This time it was better. yesterday I made a test : Switching the Target/Host kernels... The result is mostly closed to what I'm looking for : Smoothy sound, detailed, soundstage... Clearly, really better for me, the the today config : HOST : 6.7.6-ULTRA-EUP-RCU-CLTO-TEST+ TARGET : 6.7.6-RT-ULTRA-EUP-NOR-CLTO-TEST+ To Antonello : Why there's no, non RT EUP-NOR-CLTO kernel in the 6.7.6 kernel version? Thanks Streamer : RPI4 8Go + Gentooplayer ( 8.5 Kernel CTLO) + Diretta Target + Audiophonics DIGIPI+I2S - RPI4 8Go + Gentooplayer ( 8.5 Kernel CTLO) + Diretta Host + UpmPCli + MDP Bit Perfect - Power supply DIY Audiophonics S4-HP Micrel29752 - Server : Mac mini + LMS -DAC : MUSICIAN Pegasus R2R - Preamp : QUAD PRE 99 - Amps : QUAD 606 MKII (recaped and updated) x 2 - Speakers : KEF REFERENCE 203/1 - Speaker Cables : REAL CABLE 3D-TDC - DAC to Pream Cable : DIY NEOTECH NEMOI-3220 OCC PTFE Ø10mm - Preamp to Amps Cables : QED Performance Audio 40i - Ethernet Cables : SOMMER CABLE 580‑0201 CAT 6 S/UTP + RJ45 connectors LOGILINK MP048 Link to comment
chrisc Posted March 3 Share Posted March 3 Once again, Antonello to the rescue (via Anydesk) Then mistake I made was not choosing version 15 of the kernel Much appreciated. If you were in South Africa, I would have given you a couple of bottles of wine The Cape Town Hi-Fi Club. Achieve astonishing sound Listening stuff: Mercury Pi2, Devialet 440CI, REL sub, ML Electromotion, 2 x Dachshunds Link to comment
simonhiggs Posted March 3 Share Posted March 3 Hello All, How does 'Enable Ramsystem Mode Endpoint' work? I select Squeezelite/R2 and SSH into the unit and ramsystem_enable/restart. Squeezelite doesn't seem to start. This is on a RPi4. Link to comment
Barnabas Posted March 4 Share Posted March 4 On 3/2/2024 at 7:24 PM, chrisc said: Does not work like that 1st screen - Click on List Kernel, this appears Have I missed a step? You need to select a kernel type from this list, once the system reboots, if the kernel type you've selected is compatible with 6.7.6 it will show the newly installed kernel in the system info. Link to comment
madman73 Posted March 4 Share Posted March 4 Hi, is it possibile to have the latest kernels with Nvidia drivers too? Kernel: 6.6.8-x86_64-GP-CACHY-MIN-nvidia ─────────────────────────────────────── GentooPlayer | 10:37 | Mon 04/03/24 ─────────────────────────────────────── v8.50-209 | Generic Device (x86_64) Link to comment
madman73 Posted March 4 Share Posted March 4 On the NAA PC build, i'm trying GP-Version Update from 840to850. The process end as follow: check RamSystem...wait OK check Profile...wait ok ok file consistency check check internet connection OK wait... 0K ........ ........ ........ ........ 4% 11.1M 61s 32768K ........ ........ ........ ........ 9% 11.2M 58s 65536K ........ ........ ........ ........ 13% 11.8M 54s 98304K ........ ........ ........ ........ 18% 12.0M 50s 131072K ........ ........ ........ ........ 22% 12.0M 47s 163840K ........ ........ ........ ........ 27% 12.0M 44s 196608K ........ ........ ........ ........ 31% 11.7M 42s 229376K ........ ........ ........ ........ 36% 11.9M 39s 262144K ........ ........ ........ ........ 40% 11.9M 36s 294912K ........ ........ ........ ........ 45% 12.0M 33s 327680K ........ ........ ........ ........ 49% 11.9M 30s 360448K ........ ........ ........ ........ 54% 11.9M 28s 393216K ........ ........ ........ ........ 58% 12.0M 25s 425984K ........ ........ ........ ........ 63% 12.0M 22s 458752K ........ ........ ........ ........ 67% 12.0M 19s 491520K ........ ........ ........ ........ 72% 12.0M 17s 524288K ........ ........ ........ ........ 76% 12.0M 14s 557056K ........ ........ ........ ........ 81% 11.9M 11s 589824K ........ ........ ........ ........ 85% 11.7M 9s 622592K ........ ........ ........ ........ 90% 11.9M 6s 655360K ........ ........ ........ ........ 94% 12.0M 3s 688128K ........ ........ ........ ........ 99% 11.8M 0s 720896K .... 100% 11.9M=60s ...................................................................................................................................................................................................................................................OK update overlay1... * IMPORTANT: config file '/etc/init.d/gpireteonline' needs updating. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. * IMPORTANT: 4 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. wait... OK * IMPORTANT: 4 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * Last emerge --sync was 44d 16h 7m ago. >>> Running pre-merge checks for sys-apps/portage-3.0.61-r1 * Unable to check for the following kernel config options due * to absence of any configured kernel sources or compiled * config: * - IPC_NS * - PID_NS * - NET_NS * - UTS_NS * You're on your own to make sure they are set if needed. >>> Emerging binary (1 of 1) sys-apps/portage-3.0.61-r1::gentoo >>> Installing (1 of 1) sys-apps/portage-3.0.61-r1::gentoo >>> Completed (1 of 1) sys-apps/portage-3.0.61-r1::gentoo * Messages for package sys-apps/portage-3.0.61-r1: * Unable to check for the following kernel config options due * to absence of any configured kernel sources or compiled * config: * - IPC_NS * - PID_NS * - NET_NS * - UTS_NS * You're on your own to make sure they are set if needed. !!! existing preserved libs found * IMPORTANT: config file '/etc/init.d/gpireteonline' needs updating. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. * IMPORTANT: 4 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * IMPORTANT: 4 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * Last emerge --sync was 44d 16h 7m 22s ago. >>> Running pre-merge checks for sys-devel/gcc-13.2.1_p20240113-r1 >>> Emerging binary (1 of 1) sys-devel/gcc-13.2.1_p20240113-r1::gentoo >>> Installing (1 of 1) sys-devel/gcc-13.2.1_p20240113-r1::gentoo >>> Completed (1 of 1) sys-devel/gcc-13.2.1_p20240113-r1::gentoo !!! existing preserved libs found * IMPORTANT: config file '/etc/init.d/gpireteonline' needs updating. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. * IMPORTANT: 4 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * gcc-config: Could not locate profile #2 ! * IMPORTANT: 4 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * Last emerge --sync was 44d 16h 8m 7s ago. >>> Verifying ebuild manifests >>> Emerging (1 of 1) dev-build/libtool-2.4.7-r2::gentoo Link to comment
antonellocaroli Posted March 4 Author Share Posted March 4 36 minutes ago, madman73 said: On the NAA PC build, i'm trying GP-Version Update from 840to850. The process end as follow: are you sure it is stopping? and is not continuing? if it is stopping, you will have to copy the image with version 8.50 51 minutes ago, madman73 said: Hi, is it possibile to have the latest kernels with Nvidia drivers too? Kernel: 6.6.8-x86_64-GP-CACHY-MIN-nvidia ─────────────────────────────────────── GentooPlayer | 10:37 | Mon 04/03/24 ─────────────────────────────────────── v8.50-209 | Generic Device (x86_64) Try gp-update GentooPlayer home Facebook Documentation Link to comment
antonellocaroli Posted March 4 Author Share Posted March 4 14 hours ago, simonhiggs said: Hello All, How does 'Enable Ramsystem Mode Endpoint' work? I select Squeezelite/R2 and SSH into the unit and ramsystem_enable/restart. Squeezelite doesn't seem to start. This is on a RPi4. gp-update should solve... GentooPlayer home Facebook Documentation Link to comment
chrisc Posted March 4 Share Posted March 4 2 hours ago, Barnabas said: You need to select a kernel type from this list, once the system reboots, if the kernel type you've selected is compatible with 6.7.6 it will show the newly installed kernel in the system info. How do you determine if it is compatible? Is there an explanation of the different type of kernels that are available? The Cape Town Hi-Fi Club. Achieve astonishing sound Listening stuff: Mercury Pi2, Devialet 440CI, REL sub, ML Electromotion, 2 x Dachshunds Link to comment
antonellocaroli Posted March 4 Author Share Posted March 4 1 minute ago, chrisc said: Is there an explanation of the different type of kernels that are available? No, there is no explanation, the acronyms only make sense to me when I have to compile them, nothing else, they are simply different configurations, if a user has time he tries them and chooses... No one is better than another, it depends on the system and tastes... GentooPlayer home Facebook Documentation Link to comment
madman73 Posted March 4 Share Posted March 4 This script will install the nvidia drivers, the necessary software and a kernel for the nvidia drivers. Some software takes a long time to compile, it is assumed that your cpu is well cooled and has a cooling system. Use this script at your own risk. continue? 1) yes 2) no ?1 OK check RamSystem...wait OK check Profile...wait ok ok indicates the number of cpu's to be used during compilation, more cpu shorter compilation time higher temperature increase less cpu longer compilation time lower temperatures min cpu: 2 max cpu: 8 num cpu: 8 you accept the nvidia user licence? 1) yes 2) no ?1 selects the kernel to compile? 1) kernel a bassa latenza PF-Kernel 2) kernel a bassa latenza xanmod-Kernel 3) kernel a bassa latenza cachyos-Kernel 4) kernel a bassa latenza PF-Kernel-MIN 5) kernel a bassa latenza xanmod-Kernel-MIN 6) kernel a bassa latenza cachyos-Kernel-MIN ?5 * IMPORTANT: 5 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * Last emerge --sync was 45d 1h 17m 25s ago. >>> Verifying ebuild manifests >>> Emerging (1 of 1) sys-kernel/genkernel-4.3.8::gentoo >>> Installing (1 of 1) sys-kernel/genkernel-4.3.8::gentoo >>> Completed (1 of 1) sys-kernel/genkernel-4.3.8::gentoo * IMPORTANT: config file '/etc/hqplayer/hqplayerd.xml' needs updating. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. * IMPORTANT: 5 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * IMPORTANT: 5 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * Last emerge --sync was 45d 1h 17m 39s ago. >>> Verifying ebuild manifests >>> Emerging (1 of 1) sys-kernel/xanmod-sources-6.7.7::antonellocaroli >>> Failed to emerge sys-kernel/xanmod-sources-6.7.7, Log file: >>> '/var/tmp/portage/sys-kernel/xanmod-sources-6.7.7/temp/build.log' !!! Fetched file: linux-6.7.tar.xz VERIFY FAILED! !!! Reason: Insufficient data for checksum verification !!! Got: !!! Expected: BLAKE2B BLAKE2S MD5 RMD160 SHA1 SHA256 SHA3_256 SHA3_512 SHA512 WHIRLPOOL * Fetch failed for 'sys-kernel/xanmod-sources-6.7.7', Log file: * '/var/tmp/portage/sys-kernel/xanmod-sources-6.7.7/temp/build.log' * Messages for package sys-kernel/xanmod-sources-6.7.7: * Fetch failed for 'sys-kernel/xanmod-sources-6.7.7', Log file: * '/var/tmp/portage/sys-kernel/xanmod-sources-6.7.7/temp/build.log' wait... !!! Error: Number out of range: 1 cp: cannot create directory '/usr/src/linux/drivers/': No such file or directory xanmod-Kernel-MIN is KO Link to comment
doors.sl Posted March 4 Share Posted March 4 @antonellocaroli Congratulations on the 8.5 update! I really liked the Ramdisk Only DirettaTarget option. It would be nice if there was a specific Profile for DirettaTarget too, that focused only on LAN and Diretta. DomieMic65 1 Link to comment
antonellocaroli Posted March 5 Author Share Posted March 5 9 hours ago, madman73 said: xanmod-Kernel-MIN è KO Try now... GentooPlayer home Facebook Documentation Link to comment
Barnabas Posted March 5 Share Posted March 5 19 hours ago, chrisc said: How do you determine if it is compatible? Is there an explanation of the different type of kernels that are available? If the kernel type doesn’t work with the kernel selected, it installs a kernel that is. For eg if I select a v6 kernel and pick any of the RT kernel types for my Pi3 it will install a v4 kernel. You just need to try different kernel versions (5 or 6) and types (EUP, RCU, RT etc) to see what works best for your setup. Link to comment
Barnabas Posted March 5 Share Posted March 5 Any other HQPlayer embedded users that are using networkaudiod as an endpoint for a Pi3 who are using Diretta? Is it even possible? I’m relatively new to Gentooplayer :) Link to comment
simonhiggs Posted March 6 Share Posted March 6 On 3/3/2024 at 7:53 PM, simonhiggs said: Hello All, How does 'Enable Ramsystem Mode Endpoint' work? I select Squeezelite/R2 and SSH into the unit and ramsystem_enable/restart. Squeezelite doesn't seem to start. This is on a RPi4. On 3/4/2024 at 10:31 AM, antonellocaroli said: gp-update should solve... Sorry, I still dont have Squeezelite... _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ RamSystem Mode EndPoint Squeezelite/R2 Free memory: 1673MB of total 1911MB 6.7.6-GentooPlayer-ULTRA-EUP-RCU-TEST+ ─────────────────────────────────────── GentooPlayer | 08:59 | Wed 06/03/24 ─────────────────────────────────────── v8.50-210 | Raspberry Pi 4B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.26 ─────────────────────────────────────── HomePage: www.gentooplayers.com ──────────────────────────────────────────── home Return to this screen cpu-info View information about the CPU gp-update Update Overlay and Script (execute this command from time to time) ramsystem_enable Enable RamSystem at boot ramsystem_disable Disable RamSystem at boot system_info System Information news Latest news on GP ──────────────────────────────────────────── GentooPlayerRpi4 ~ # ps ax PID TTY STAT TIME COMMAND 1 ? Ss 0:00 init [3] 2 ? S 0:00 [kthreadd] 3 ? S 0:00 [pool_workqueue_release] 4 ? I< 0:00 [kworker/R-rcu_g] 5 ? I< 0:00 [kworker/R-rcu_p] 6 ? I< 0:00 [kworker/R-slub_] 7 ? I< 0:00 [kworker/R-netns] 8 ? I 0:00 [kworker/0:0-events] 9 ? I< 0:00 [kworker/0:0H-events_highpri] 10 ? I 0:00 [kworker/0:1-events_power_efficient] 11 ? I 0:00 [kworker/u8:0-ext4-rsv-conversion] 12 ? I< 0:00 [kworker/R-mm_pe] 13 ? S 0:00 [ksoftirqd/0] 14 ? I 0:00 [rcu_preempt] 15 ? S 0:00 [rcuog/0] 16 ? S 0:00 [rcuop/0] 17 ? S 0:00 [rcub/0] 18 ? S 0:00 [migration/0] 19 ? S 0:00 [cpuhp/0] 20 ? S 0:00 [cpuhp/1] 21 ? S 0:00 [migration/1] 22 ? S 0:00 [ksoftirqd/1] 23 ? I 0:00 [kworker/1:0-events] 24 ? I< 0:00 [kworker/1:0H-kblockd] 25 ? S 0:00 [rcuop/1] 26 ? S 0:00 [cpuhp/2] 27 ? S 0:00 [migration/2] 28 ? S 0:00 [ksoftirqd/2] 29 ? I 0:00 [kworker/2:0-mm_percpu_wq] 30 ? I< 0:00 [kworker/2:0H-kblockd] 31 ? S 0:00 [rcuog/2] 32 ? S 0:00 [rcuop/2] 33 ? S 0:00 [cpuhp/3] 34 ? S 0:00 [migration/3] 35 ? S 0:00 [ksoftirqd/3] 36 ? I 0:00 [kworker/3:0-events] 37 ? I< 0:00 [kworker/3:0H-kblockd] 38 ? S 0:00 [rcuop/3] 39 ? I 0:00 [kworker/u9:0-writeback] 40 ? I 0:00 [kworker/u10:0-events_unbound] 41 ? I 0:00 [kworker/u11:0-events_unbound] 42 ? I 0:00 [kworker/u12:0-events_unbound] 43 ? S 0:00 [kdevtmpfs] 44 ? I< 0:00 [kworker/R-inet_] 45 ? I 0:00 [kworker/u9:1-flush-179:0] 46 ? I 0:00 [kworker/0:2-events] 47 ? S 0:00 [khungtaskd] 48 ? S 0:00 [oom_reaper] 49 ? I< 0:00 [kworker/R-write] 50 ? S 0:00 [kcompactd0] 51 ? I< 0:00 [kworker/R-kbloc] 52 ? S 0:00 [watchdogd] 53 ? I 0:00 [kworker/1:1-events] 54 ? I< 0:00 [kworker/0:1H-mmc_complete] 55 ? S 0:00 [kswapd0] 56 ? I< 0:00 [kworker/R-cifsi] 57 ? I< 0:00 [kworker/R-smb3d] 58 ? I< 0:00 [kworker/R-cifsf] 59 ? I< 0:00 [kworker/R-cifso] 60 ? I< 0:00 [kworker/R-defer] 61 ? S 0:00 [hwrng] 62 ? I< 0:00 [kworker/R-iscsi] 63 ? I< 0:00 [kworker/R-nvme-] 64 ? I< 0:00 [kworker/R-nvme-] 65 ? I< 0:00 [kworker/R-nvme-] 67 ? I< 0:00 [kworker/R-DWC N] 68 ? I< 0:00 [kworker/R-uas] 69 ? I< 0:00 [kworker/R-mld] 70 ? I< 0:00 [kworker/R-ipv6_] 71 ? I< 0:00 [kworker/u13:0] 72 ? I< 0:00 [kworker/u14:0] 73 ? I< 0:00 [kworker/u15:0] 74 ? I< 0:00 [kworker/u16:0] 75 ? I< 0:00 [kworker/u17:0] 76 ? I 0:00 [kworker/u9:2-events_unbound] 77 ? I 0:00 [kworker/u9:3-events_unbound] 78 ? I 0:00 [kworker/u9:4-events_unbound] 79 ? I 0:00 [kworker/u9:5-events_unbound] 80 ? I< 0:00 [kworker/R-sdhci] 81 ? S 0:00 [irq/34-mmc0] 82 ? I 0:00 [kworker/0:3-mm_percpu_wq] 83 ? I< 0:00 [kworker/R-mmc_c] 84 ? S 0:00 [jbd2/mmcblk0p2-8] 85 ? I< 0:00 [kworker/R-ext4-] 88 ? I< 0:00 [kworker/1:1H-kblockd] 90 ? I< 0:00 [kworker/2:1H-kblockd] 92 ? I 0:00 [kworker/3:1-mm_percpu_wq] 93 ? I 0:00 [kworker/2:1-mm_percpu_wq] 300 ? I< 0:00 [kworker/3:1H-kblockd] 591 ? I 0:00 [kworker/u12:1-events_unbound] 948 ? Ss 0:00 /lib/systemd/systemd-udevd 999 ? I< 0:00 [kworker/0:2H-kblockd] 1028 ? I< 0:00 [kworker/3:2H] 1033 ? I< 0:00 [kworker/2:2H] 1108 ? I 0:00 [kworker/u11:1-events_unbound] 1109 ? I 0:00 [kworker/u11:2-events_unbound] 1318 ? I 0:00 [kworker/u8:1] 1319 ? I 0:00 [kworker/3:2-events] 1374 ? I 0:00 [kworker/u10:1] 1431 ? I< 0:00 [kworker/1:2H] 1520 ? Ss 0:00 sshd: /usr/sbin/sshd -o PidFile=/run/sshd.pid -f /etc/ssh/sshd_config [listener] 0 of 10-100 startups 1966 ? S 0:00 dhcpcd: [manager] [ip4] [ip6] 1987 ? I 0:00 [kworker/2:2-events_power_efficient] 2087 ? I 0:00 [kworker/u18:0] 2108 ? I 0:00 [kworker/1:2-events] 2629 ? Ss 0:00 sshd: root@pts/0 2707 pts/0 Ss 0:00 -bash 2747 pts/0 R+ 0:00 ps ax Link to comment
antonellocaroli Posted March 6 Author Share Posted March 6 29 minutes ago, simonhiggs said: Sorry, I still dont have Squeezelite... Sends the result of the command system_info GentooPlayer home Facebook Documentation Link to comment
simonhiggs Posted March 6 Share Posted March 6 1 minute ago, antonellocaroli said: Sends the result of the command system_info Profile: Profile not Setting RamSystem: Mode EndPoint Squeezelite/R2 Free memory: 1689MB of total 1911MB Kernel: 6.7.6-GentooPlayer-ULTRA-EUP-RCU-TEST+ ─────────────────────────────────────── GentooPlayer | 09:38 | Wed 06/03/24 ─────────────────────────────────────── v8.50-210 | Raspberry Pi 4B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.26 ─────────────────────────────────────── Players/soft. Info: Squeezelite-R2 [Enabled] Squeezelite [Disabled] Networkaudiod [Disabled] LogitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Disabled] UpMpdCli [Disabled] RoonBridge [Enabled] RoonServer [Disabled] myMPD [Disabled] minimserver [Disabled] shairport-sync [Disabled] spotify-connect [Disabled] web-interface [Enabled] Samba [Disabled] gmediarender [Disabled] camillagui [Disabled] aplayer [Disabled] aprenderer [Disabled] gstreciver [Disabled] HotSpot [Disabled] GP-Service Info: gpchronystop [Enabled] gphavagedstop [Enabled] gpkernel1 [Enabled] gprtclock [Enabled] gpsetrestart [Enabled] - Started Service: dhcpcd clockup netmount sshd local Stopped Service: chronyd gpkernel1 gprtclock roonbridge squeezelite-R2 web gphavagedstop gpchronystop gpsetrestart Crashed Service: ───────────────────────────────────────────────────── Boot Options: dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=817067c7-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait selinux=0 net.ifnames=0 ───────────────────────────────────────────────────── *** Scanning for playback devices *** Card 0, ID `RED', name `Holo Audio UAC2.0 Gen2 - RED' Device 0, ID `USB Audio', name `USB Audio', 1 subdevices (1 available) 2 channels, sampling rate 44100..768000 Hz Sample formats: S16_LE, S32_LE, SPECIAL, DSD_U32_BE Buffer size range from 16 to 1536000 Period size range from 8 to 768000 Subdevice 0, name `subdevice #0' ───────────────────────────────────────────────────── AUDIO CARDS INFO: CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 USB Audio card usb --> 152a:87c0 Holo Audio Holo card0 STATUS --> closed -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- ───────────────────────────────────────────────────── K-e4:5f:01:ea:5a:1c ───────────────────────────────────────────────────── ───────────────────────────────────────────────────── Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 14G 5.5G 7.7G 42% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 383M 460K 382M 1% /run shm tmpfs 956M 0 956M 0% /dev/shm none tmpfs 1.9G 13M 1.8G 1% /bin none tmpfs 1.9G 16M 1.8G 1% /etc none tmpfs 1.9G 12M 1.8G 1% /sbin none tmpfs 1.9G 14M 1.8G 1% /lib none tmpfs 1.9G 16M 1.8G 1% /lib64 none tmpfs 1.9G 70M 1.8G 4% /usr none tmpfs 1.9G 292K 1.9G 1% /var none tmpfs 1.9G 0 1.9G 0% /tmp none tmpfs 1.9G 4.2M 1.9G 1% /opt none tmpfs 1.9G 268K 1.9G 1% /root /dev/mmcblk0p1 vfat 591M 224M 368M 38% /boot ───────────────────────────────────────────────────── Raspberry Pi Compute Module 4 Rev 1.1 CPU(s): 4 On-line CPU(s) list: 0-3 CPU(s) scaling MHz: 100% Thread(s) per core: 1 Vendor ID: ARM Model: 3 Model name: Cortex-A72 ───────────────────────────────────────────────────── Information not available in ram mode ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 34'c : 93'f | Cool runnings. Governor | performance Current Freq Min Freq Max Freq CPU0 | 1500 MHz 600 MHz 1500 MHz CPU1 | 1500 MHz 600 MHz 1500 MHz CPU2 | 1500 MHz 600 MHz 1500 MHz CPU3 | 1500 MHz 600 MHz 1500 MHz ───────────────────────────────────────────────────── COMMAND %CPU init 0.0 systemd-udevd 0.0 kworker/0:1H-mm 0.0 kworker/0:2-eve 0.0 rcuop/3 0.0 Link to comment
antonellocaroli Posted March 6 Author Share Posted March 6 @simonhiggs thanks I will look at it later... GentooPlayer home Facebook Documentation Link to comment
mavwong Posted March 6 Share Posted March 6 @antonellocaroli for endpoint ramdisk mode, if we want to back to normal mode we can just reboot the RPI by powering off and back on correct? Thus I don't see why do we need SSH enable for this RAM disk mode. Or there are other aspect I don't understand. Speaker system: RPI4B + Gentooplayer CLTO kernal + LMS (upnp plug-in) -> RPI5B + UPNP + Diretta host -> RPI5B + Gentooplayer CLTO kernal + Diretta Target -> Tubulus Concentus USB Cable -> Holo Red DDC -> Tubulus Concentus i2s Cable V2 -> Holo May KTE I2S -> DIY silver wire balance -> Holo Bliss KTE -> Ansuz Diamond balance -> BAT Rex 500 -> ASI Ref speaker cable -> ASI Tango HP: HD600 moded, HE1000v1, airpod pro2, Sony WH-10000XM5 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now