antonellocaroli Posted March 25 Author Share Posted March 25 3 minutes ago, aqs_ said: Can I download a new image to the SD card, I probably have to reinstall the system, DigioneSignature is invisible? send systeminfo GentooPlayer home Facebook Documentation Link to comment
Auke Posted March 25 Share Posted March 25 2 hours ago, PML said: I made this for Target : one proc for target, one for eth, one for usb, one for system (not isolated) And for Host : one for diretta alsa host, one for eth, one for mpd, one for system (not isolated) @PML On host you haven't one for usb, but you use a LAN usb adapter don't you? On target you do use a processor for usb. Do you use a usb out on the holo red? Link to comment
Auke Posted March 25 Share Posted March 25 6 hours ago, PML said: Same for me, with mpd and upmpdcli and Diretta. I use also kernel tweak and CPU affinity for my own profiles without issue. Listen to music for long hours with no issue. (On RPI5 and RPI4) Another question: which kernel tweak do you use? Link to comment
PML Posted March 25 Share Posted March 25 1 hour ago, Auke said: @PML On host you haven't one for usb, but you use a LAN usb adapter don't you? On target you do use a processor for usb. Do you use a usb out on the holo red? No currently my dongle do not use usb lan dongle (I have Issue with Power supply in 3A which blocked this on RPI5) but even with just eth the new ethernet card of RPI5 is better than before with dongle. But I will buy another power supply in 5A. Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
PML Posted March 25 Share Posted March 25 26 minutes ago, Auke said: Another question: which kernel tweak do you use? I always the same that Antonello recommended some month ago, nothing new. Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
Auke Posted March 25 Share Posted March 25 4 minutes ago, PML said: I always the same that Antonello recommended some month ago, nothing new. Ahh you mean the settings in TWK Link to comment
Ikyo Posted March 25 Share Posted March 25 Hello everybody ! If it can help, my current settings as follow and all is working like a charm. very warm and natural sound on my system, no stability problem. LMS tuning on a Mac mini. RPI - DIRETTA TARGET Profile: Profile1 RamSystem: Mode 6 Kernel: 6.8.1-GentooPlayer-ULTRA-EUP-CLTO-TEST+ GentooPlayer v8.60-213 | Raspberry Pi 4B+ (aarch64) web-interface [Enabled] RPI - DIRETTA HOST Profile: Profile1 RamSystem: Mode 6 Kernel: 6.8.1-GentooPlayer-RT-ULTRA-EUP-NOR-CLTO-TEST+ GentooPlayer v8.60-213 | Raspberry Pi 4B+ (aarch64) ─────────────────────────────────────── eth0 | 169.254.216.9 ─────────────────────────────────────── Mpd [Enabled] UpMpdCli [Enabled] web-interface [Enabled] I'm using a direct ethernet link for Diretta IPV6 link, and a dongle for each RPI to keep a direct setup access. additional settings : Auke 1 Streamer : RPI4 8Go + Gentooplayer ( 8.5 Kernel CTLO) + Diretta Target + Audiophonics DIGIPI+I2S - RPI4 8Go + Gentooplayer ( 8.5 Kernel CTLO) + Diretta Host + UpmPCli + MDP Bit Perfect - Power supply DIY Audiophonics S4-HP Micrel29752 - Server : Mac mini + LMS -DAC : MUSICIAN Pegasus R2R - Preamp : QUAD PRE 99 - Amps : QUAD 606 MKII (recaped and updated) x 2 - Speakers : KEF REFERENCE 203/1 - Speaker Cables : REAL CABLE 3D-TDC - DAC to Pream Cable : DIY NEOTECH NEMOI-3220 OCC PTFE Ø10mm - Preamp to Amps Cables : QED Performance Audio 40i - Ethernet Cables : SOMMER CABLE 580‑0201 CAT 6 S/UTP + RJ45 connectors LOGILINK MP048 Link to comment
Auke Posted March 25 Share Posted March 25 On 2/28/2024 at 11:01 AM, Wladimir said: Also, you can tune the tonality with gpkernel parameters, I'm personally using 1,3,4. (Menu 11) Tried this. It does have a effect. It seams to soften the sound a bit. Its a nice effect. Have to listen more. Wladimir 1 Link to comment
aqs_ Posted March 25 Share Posted March 25 3 hours ago, antonellocaroli said: send systeminfo _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ Profile: Profile not Setting RamSystem: Ramsystem not enabled Free memory: 3671MB of total 3860MB Kernel: 6.1.77-GentooPlayer-RT-ULTRA-EUP100-NOR-rt24+ ─────────────────────────────────────── GentooPlayer | 17:33 | Mon 25/03/24 ─────────────────────────────────────── v8.60-212 | Raspberry Pi 4B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.19 ─────────────────────────────────────── Players/soft. Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Disabled] LogitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Disabled] UpMpdCli [Disabled] RoonBridge [Enabled] RoonServer [Disabled] myMPD [Disabled] minimserver [Disabled] shairport-sync [Disabled] spotify-connect [Disabled] web-interface [Enabled] Samba [Disabled] gmediarender [Disabled] camillagui [Disabled] aplayer [Disabled] aprenderer [Disabled] gstreciver [Enabled] HotSpot [Disabled] GP-Service Info: gpchronystop [Enabled] gphavagedstop [Enabled] gpkernel1 [Enabled] gprtclock [Enabled] gpsetrestart [Enabled] - DirettaSingle Started Service: dhcpcd net.br0 clockup gstreciver netmount roonbridge local Stopped Service: gprtclock chronyd gpkernel1 gphavagedstop gpchronystop gpsetrestart Crashed Service: ───────────────────────────────────────────────────── Boot Options: dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=6fa8ec3b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait mitigations=off nosoftlockup cpufreq.off=1 numa_balancing=disable audit=0 selinux=0 cpuidle.off=1 skew_tick=1 acpi_irq_nobalance net.ifnames=0 ───────────────────────────────────────────────────── *** Scanning for playback devices *** Card 0, ID `sndallodigione', name `snd_allo_digione' Device 0, ID `Allo DigiOne HiFi wm8804-spdif-0', name `Allo DigiOne HiFi wm8804-spdif-0', 1 subdevices (0 available) Error opening sound device for card 0, device 0: Device or resource busy. Skipping. ───────────────────────────────────────────────────── AUDIO CARDS INFO: CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 Internal Audio card card0 --> -- Allo DigiOne HiFi card0 STATUS --> access: RW_INTERLEAVED format: S24_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 441 buffer_size: 8820 -------------------------------------------------------------------------------------------------------- USER PID ACCESS COMMAND /dev/snd/pcmC0D0p: root 2166 F.... gst-launch-1.0 -------------------------------------------------------------------------------------------------------- ───────────────────────────────────────────────────── K-d8:3a:dd:36:df:a9 5a:30:ec:89:c3:14 ───────────────────────────────────────────────────── ───────────────────────────────────────────────────── Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 57G 6.0G 49G 11% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 773M 528K 772M 1% /run shm tmpfs 1.9G 12K 1.9G 1% /dev/shm /dev/mmcblk0p1 vfat 591M 212M 380M 36% /boot ───────────────────────────────────────────────────── Raspberry Pi 4 Model B Rev 1.5 CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Vendor ID: ARM Model: 3 Model name: Cortex-A72 ───────────────────────────────────────────────────── CPU-specific microarchitecture: ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 50'c : 122'f | Optimal. Governor | Unknown Current Freq Min Freq Max Freq CPU0 | 0 MHz 0 MHz 0 MHz ───────────────────────────────────────────────────── COMMAND %CPU mono-sgen 5.0 mono-sgen 4.2 mono-sgen 1.9 systemd-udevd 0.1 Link to comment
antonellocaroli Posted March 25 Author Share Posted March 25 38 minutes ago, aqs_ said: _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ Profile: Profile not Setting RamSystem: Ramsystem not enabled Free memory: 3671MB of total 3860MB Kernel: 6.1.77-GentooPlayer-RT-ULTRA-EUP100-NOR-rt24+ ─────────────────────────────────────── GentooPlayer | 17:33 | Mon 25/03/24 ─────────────────────────────────────── v8.60-212 | Raspberry Pi 4B+ (aarch64) ─────────────────────────────────────── eth0 | 192.168.1.19 ─────────────────────────────────────── Players/soft. Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Disabled] LogitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Disabled] UpMpdCli [Disabled] RoonBridge [Enabled] RoonServer [Disabled] myMPD [Disabled] minimserver [Disabled] shairport-sync [Disabled] spotify-connect [Disabled] web-interface [Enabled] Samba [Disabled] gmediarender [Disabled] camillagui [Disabled] aplayer [Disabled] aprenderer [Disabled] gstreciver [Enabled] HotSpot [Disabled] GP-Service Info: gpchronystop [Enabled] gphavagedstop [Enabled] gpkernel1 [Enabled] gprtclock [Enabled] gpsetrestart [Enabled] - DirettaSingle Started Service: dhcpcd net.br0 clockup gstreciver netmount roonbridge local Stopped Service: gprtclock chronyd gpkernel1 gphavagedstop gpchronystop gpsetrestart Crashed Service: ───────────────────────────────────────────────────── Boot Options: dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=6fa8ec3b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait mitigations=off nosoftlockup cpufreq.off=1 numa_balancing=disable audit=0 selinux=0 cpuidle.off=1 skew_tick=1 acpi_irq_nobalance net.ifnames=0 ───────────────────────────────────────────────────── *** Scanning for playback devices *** Card 0, ID `sndallodigione', name `snd_allo_digione' Device 0, ID `Allo DigiOne HiFi wm8804-spdif-0', name `Allo DigiOne HiFi wm8804-spdif-0', 1 subdevices (0 available) Error opening sound device for card 0, device 0: Device or resource busy. Skipping. ───────────────────────────────────────────────────── AUDIO CARDS INFO: CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 Internal Audio card card0 --> -- Allo DigiOne HiFi card0 STATUS --> access: RW_INTERLEAVED format: S24_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 441 buffer_size: 8820 -------------------------------------------------------------------------------------------------------- USER PID ACCESS COMMAND /dev/snd/pcmC0D0p: root 2166 F.... gst-launch-1.0 -------------------------------------------------------------------------------------------------------- ───────────────────────────────────────────────────── K-d8:3a:dd:36:df:a9 5a:30:ec:89:c3:14 ───────────────────────────────────────────────────── ───────────────────────────────────────────────────── Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 57G 6.0G 49G 11% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 773M 528K 772M 1% /run shm tmpfs 1.9G 12K 1.9G 1% /dev/shm /dev/mmcblk0p1 vfat 591M 212M 380M 36% /boot ───────────────────────────────────────────────────── Raspberry Pi 4 Model B Rev 1.5 CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Vendor ID: ARM Model: 3 Model name: Cortex-A72 ───────────────────────────────────────────────────── CPU-specific microarchitecture: ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | aarch64 Temp | 50'c : 122'f | Optimal. Governor | Unknown Current Freq Min Freq Max Freq CPU0 | 0 MHz 0 MHz 0 MHz ───────────────────────────────────────────────────── COMMAND %CPU mono-sgen 5.0 mono-sgen 4.2 mono-sgen 1.9 systemd-udevd 0.1 how come you have gstreciver active? this occupies the sound card... which cannot be used by other players... Player/Audio setting > GSTplayerReciver aqs_ 1 GentooPlayer home Facebook Documentation Link to comment
PML Posted March 25 Share Posted March 25 1,3,4 make a little ethereal gaunt on my system, I prefer all... Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
aqs_ Posted March 25 Share Posted March 25 Does Tidal work with bubble upnp + UpMpdCli? Qobuz and minimserver work perfectly, Tidal does not play Link to comment
Auke Posted March 25 Share Posted March 25 On 1/10/2024 at 9:51 AM, PML said: 1st it's RPI conf with 4 proc (it can be adapted with the same principle) Be careful with this conf : if you set absurd cpu affinity or isolation you can i think break your system) On Target Profil 2 (one proc for eth, one for usb, one for player, one for system) On Host : first isolate 3 cpu from 4 of RPI, I set one cpu for eth (because my host only do input and output with ethernet) One cpu for mpd/upmpdcli And one for Diretta Host This principles can be adapted for other type of configuration, depending wich process are executed in parallel... Rpi 4 host: I use a usb ethernet dongle and external usb harddisk. I have set usb and eth on cpu 1. Lms and squeezelite on cpu 2 Diretta host on 3 Best choice? Or should i try a different setting Hmm the following do make me think: ---------------- Note: Rpi3 it is not possible to move irqs, they will remain on cpu0 (kernel design) Rpi4 it is not possible to move USB irqs, they will remain on cpu0 (kernel design) --------------- Usb wil remain on cpu0. Link to comment
aqs_ Posted March 26 Share Posted March 26 Why is there no Tidal in UpMpdCli, he updated it via GentooPlayer, from what I read tobTidal kwst is supported. And why doesn't Tidal work for me because of Bubbleupnp? Link to comment
antonellocaroli Posted March 26 Author Share Posted March 26 6 minutes ago, aqs_ said: Why is there no Tidal in UpMpdCli, he updated it via GentooPlayer, from what I read tobTidal kwst is supported. And why doesn't Tidal work for me because of Bubbleupnp? Use mcconnect GentooPlayer home Facebook Documentation Link to comment
aqs_ Posted March 26 Share Posted March 26 44 minutes ago, antonellocaroli said: Use mcconnect Are you talking about the player? I tried Linn, Lumin, Linn Kazoo, I can't play Tidal on all three Link to comment
PML Posted March 26 Share Posted March 26 11 hours ago, Auke said: Rpi 4 host: I use a usb ethernet dongle and external usb harddisk. I have set usb and eth on cpu 1. Lms and squeezelite on cpu 2 Diretta host on 3 Best choice? Or should i try a different setting Hmm the following do make me think: ---------------- Note: Rpi3 it is not possible to move irqs, they will remain on cpu0 (kernel design) Rpi4 it is not possible to move USB irqs, they will remain on cpu0 (kernel design) --------------- Usb wil remain on cpu0. Seems you are right on IRQ (I do not understand so the interrest of profile 2 that a lot of guys used on RPI for a long time) I will try other settings to give more cpu on system and remove isolation for fixed cpu for eth and usb But in fact the principle of isolations is always the same... Apologise for the mistake... Auke 1 Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
PML Posted March 26 Share Posted March 26 Now I use Target Diretta as RAM end point with 2 cpu isolated (the 2 other for System) Host 1 CPU system, (1-3 isolated) -> 1CPU Mpd, 1 CPU Upmpdcli, 1 CPU Diretta Alsa Host Sound really well Auke 1 Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
aqs_ Posted March 26 Share Posted March 26 5 hours ago, antonellocaroli said: Use mcconnect Tidal works via mconnect, is there anything that can be done to make it work via the Linn apk? Link to comment
PML Posted March 26 Share Posted March 26 Linn needs this proprietary implementation to work with tidal (as notified in app) Linn is mainly done for Linn system I installed the Android App and it'is clearly said. Davaar 80 Build 391 (4.80.391) Released on 10 Dec 2020Click to view more.. New Features Added support for Tidal's new OAuth-based login process PLEASE NOTE: Tidal changes also require a Kazoo/Linn update. Required versions: Kazoo v4.13.74+ Linn v4.2.18+ Kazoo Server v4.11.16+ Added support for Tidal's new streaming endpoint PLEASE NOTE: TIDAL are now enforcing simultaneous playback restrictions as per Tidal Support Article Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
PML Posted March 26 Share Posted March 26 aqs_ 1 Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
aqs_ Posted March 26 Share Posted March 26 6 minutes ago, PML said: Linn needs this proprietary implementation to work with tidal (as notified in app) Linn is mainly done for Linn system I installed the Android App and it'is clearly said. Davaar 80 Build 391 (4.80.391) Released on 10 Dec 2020Click to view more.. New Features Added support for Tidal's new OAuth-based login process PLEASE NOTE: Tidal changes also require a Kazoo/Linn update. Required versions: Kazoo v4.13.74+ Linn v4.2.18+ Kazoo Server v4.11.16+ Added support for Tidal's new streaming endpoint PLEASE NOTE: TIDAL are now enforcing simultaneous playback restrictions as per Tidal Support Article So it's not possible, support only for Linn hardware. But Tidal via the Lumin apk doesn't work either Only mconnect? Link to comment
PML Posted March 26 Share Posted March 26 5 minutes ago, aqs_ said: So it's not possible, support only for Linn hardware. But Tidal via the Lumin apk doesn't work either Only mconnect? No Audirvana work well : I stream with Tidal and Qobuz Or BubbleUPnP on Android. Or JPlay. Lumin and Linn are apps for proprietary Hardware Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
aqs_ Posted March 26 Share Posted March 26 I've had roon for several years, but I wanted to get rid of it because once I listen to 90% of CDs, and twice roon plays worse than mpd + minimserver, if I listen to files it's mainly Qobuz, but there are many more Polish albums on Tidal, hence my search for a player Link to comment
PML Posted March 26 Share Posted March 26 2 minutes ago, aqs_ said: I've had roon for several years, but I wanted to get rid of it because once I listen to 90% of CDs, and twice roon plays worse than mpd + minimserver, if I listen to files it's mainly Qobuz, but there are many more Polish albums on Tidal, hence my search for a player Audirvana work very well with Tidal and Qobuz and Stream to GP very well (there are many alternatives, I use UPNP via Upmpdcli on Diretta Host (on GP), and Target on GP also, you can also stream via Diretta and Diretta ASIO driver if you have just the target on GP, or even without diretta stream via UPNP to your GP) aqs_ 1 Qobuz Studio -> Audirvana Studio - HAF Filter xtalk (from homeaudiofidelity.com with Waves VST3 ir-l-convolution-reverb) -UPnP> UPmpdcli/Mpd sur RPI5 Gentoo Player v8.60 as host Diretta (kernel 6.8.1 RT CLTO EUP NOR, Shanti Alim, tweak kernel) -> Holo Red Diretta Target (kernel 6.8.1 non RT EUP) -Silver I2S> Holo Spring 2 kte -Silver XLR> BC Accoustique 362 D -> Quellis 1 Optima. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now