skypickle Posted December 30, 2016 Share Posted December 30, 2016 copy the image to your sd card w this: What is WinImage You do not need internet but you do need a network (a LAN) Win10 PRO->PPANG USB->Gustard X20->Jotunheim->Sanders magtech monoblocks->3.7i Link to comment
RealDiels Posted December 30, 2016 Share Posted December 30, 2016 copy the image to your sd card w this: What is WinImage You do not need internet but you do need a network (a LAN) Excellent, I will use WinImage to install the image. Thanks for the fast reply! For the second part, can I connect my Pi to my laptop directly with an ethernet cable? I have very little experience with networks, so I may be crazy for asking that. Will something like that work, or do I need some sort of router box to connect the two and make a network? From what I understand, I need to establish a network connection between the Pi and another device (I'm assuming my laptop would be easiest) to access the setup menu on said device via a web browser. Am I on the right track here? The issue is I don't know enough to be able to create a network between my Pi and my laptop without using an internet network. Link to comment
MikeyFresh Posted December 30, 2016 Share Posted December 30, 2016 Hi, guys. I got a shiny new Pi 3 for Christmas, and I was looking to use Moode with it. I have everything I need to set up the Pi (power cord, cables, microSD card, external hard drive, etc) and a Hifiberry DAC+ Pro. The bad news is, I have only the data on my phone (which can be a WiFi hotspot if necessary) as internet at home. I know Moode can be controlled without internet access via access point mode once it is set up, but I don't know if I can set it up without internet access. So here are my newbie questions: > Can I setup Moode from scratch without internet to use access point mode? > So, um, how do I install the .img file to the microSD card? Surely I don't just copy it over, right? Is there some program I need to install the .img file to my microSD card to run Moode? Sorry for the noob questions. I really appreciate all your help! I see no reason why you wouldn't be able to use the AP mode to do all of the Moode set-up/configuration. I use the free and excellent cross-platform Etcher application to flash microSD cards. Boycott HDtracks Boycott Lenbrook Boycott Warner Music Group Link to comment
RealDiels Posted December 30, 2016 Share Posted December 30, 2016 So I have written the image to the microSD card. I have the Pi attached to my monitor. I plug in the Pi to turn it on and a bunch of lines run. It asks for an SHH login and password, I use pi and raspberry respectively. Moode then appears on screen. What input do I need to give to put the Pi into Access Point mode? I can see an intermittent WiFi access point named Moode, but it disappears before I can connect properly. Also, if I don't input anything while the Pi displays the Moode screen for maybe 15 seconds, the screen goes blank and I cannot input anything else. So my big question is, how do I kick my Pi into Access Point mode? Is there some input I need to give it to do so? Link to comment
MikeyFresh Posted December 31, 2016 Share Posted December 31, 2016 So I have written the image to the microSD card. I have the Pi attached to my monitor. I plug in the Pi to turn it on and a bunch of lines run. It asks for an SHH login and password, I use pi and raspberry respectively. Moode then appears on screen. What input do I need to give to put the Pi into Access Point mode? I can see an intermittent WiFi access point named Moode, but it disappears before I can connect properly. Also, if I don't input anything while the Pi displays the Moode screen for maybe 15 seconds, the screen goes blank and I cannot input anything else. So my big question is, how do I kick my Pi into Access Point mode? Is there some input I need to give it to do so? I don't think you need to login with the password, I never have, just let all of the lines of code run after power up and then look for the Moode AP on your WiFi network choices. If the Moode AP is intermittent you could have a problem with too great a distance, or interference of some kind, or a metal RPi case that lacks an opening for the board's wifi antenna thus blocking most of the signal? Boycott HDtracks Boycott Lenbrook Boycott Warner Music Group Link to comment
franz159 Posted December 31, 2016 Share Posted December 31, 2016 Hi, guys. I got a shiny new Pi 3 for Christmas, and I was looking to use Moode with it. I have everything I need to set up the Pi (power cord, cables, microSD card, external hard drive, etc) and a Hifiberry DAC+ Pro. The bad news is, I have only the data on my phone (which can be a WiFi hotspot if necessary) as internet at home. I know Moode can be controlled without internet access via access point mode once it is set up, but I don't know if I can set it up without internet access. So here are my newbie questions: > Can I setup Moode from scratch without internet to use access point mode? > So, um, how do I install the .img file to the microSD card? Surely I don't just copy it over, right? Is there some program I need to install the .img file to my microSD card to run Moode? Sorry for the noob questions. I really appreciate all your help! To prepare the sd card, if you are using a Mac, I recommend "Apple-Pi Baker" Tweaking4All.com - Computer Tips, Tricks, ... for everyone ... Link to comment
Afshin Posted December 31, 2016 Share Posted December 31, 2016 Hi Folks, Happy new year to all, I was wondering if anyone knows that Moode can work with Korg DS-DAC-10R. The input formats are: DSD: 2.8224MHz/5.6448MHz, 1bit PCM: 44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz, 16bit/24bit In addition it supports DoP protocol. The device works in OSX without any additional driver. BEST, Link to comment
franz159 Posted December 31, 2016 Share Posted December 31, 2016 Originally Posted by RealDiels Hi, guys. I got a shiny new Pi 3 for Christmas, and I was looking to use Moode with it. I have everything I need to set up the Pi (power cord, cables, microSD card, external hard drive, etc) and a Hifiberry DAC+ Pro. The bad news is, I have only the data on my phone (which can be a WiFi hotspot if necessary) as internet at home. I know Moode can be controlled without internet access via access point mode once it is set up, but I don't know if I can set it up without internet access. So here are my newbie questions: > Can I setup Moode from scratch without internet to use access point mode? > So, um, how do I install the .img file to the microSD card? Surely I don't just copy it over, right? Is there some program I need to install the .img file to my microSD card to run Moode? Sorry for the noob questions. I really appreciate all your help! To prepare the sd card, if you are using a Mac, I recommend "Apple-Pi Baker"Tweaking4All.com - Computer Tips, Tricks, ... for everyone ... ..my apologies... I read all previous posts and I realise now you are well beyond the SD card writing! Link to comment
LLZZ Posted January 1, 2017 Share Posted January 1, 2017 Hello, The streaming adresses provided by Tim have changed. Here are the new adresses : France Musique Live http://direct.francemusique.fr/live/francemusique-midfi.mp3 France Culture Live http://direct.franceculture.fr/live/franceculture-midfi.mp3 France Inter Paris (FIP) http://direct.fipradio.fr/live/fip-midfi.mp3 France Musique has now different streaming channels (not available on FM) in a higher definition (192 kbps) : France Musique Classique Easy http://direct.francemusique.fr/live/francemusiqueeasyclassique-hifi.mp3France Musique Classique Plus http://direct.francemusique.fr/live/francemusiqueclassiqueplus-hifi.mp3 France Musique Concerts Radio France http://direct.francemusique.fr/live/francemusiqueconcertsradiofrance-hifi.mp3 France Musique Evenementielle http://direct.francemusique.fr/live/francemusiquelevenementielle-hifi.mp3 France Musique La Contemporaine http://direct.francemusique.fr/live/francemusiquelacontemporaine-hifi.mp3 France Musique La Jazz http://direct.francemusique.fr/live/francemusiquelajazz-hifi.mp3 France Musique Ocora Musique du Monde http://direct.francemusique.fr/live/francemusiqueocoramonde-hifi.mp3 Link to comment
josephjosephjoe Posted January 2, 2017 Share Posted January 2, 2017 Hello I'm a noob and i need a bit of help: I have Moode up and running on a pi3 via a digi+ pro dac and I am getting no audio output. I think this is due to the fact the I am getting a greyed out ALSA % box and the note "hardware volume controller not detected" . Any advice would be greatly appreciated! Happy new year! Best, -Joe Link to comment
TimCurtis Posted January 2, 2017 Share Posted January 2, 2017 Hello I'm a noob and i need a bit of help: I have Moode up and running on a pi3 via a digi+ pro dac and I am getting no audio output. I think this is due to the fact the I am getting a greyed out ALSA % box and the note "hardware volume controller not detected" . Any advice would be greatly appreciated! Happy new year! Best, -Joe Hi Joe, Reboot and post back the output from cmd below. cat /var/log/moode.log -Tim Enjoy the Music ! http://moodeaudio.org http://twitter.com/MoodeAudio Link to comment
josephjosephjoe Posted January 2, 2017 Share Posted January 2, 2017 Thanks so much Tim! 20161205 194040 worker: Startup 20161205 194042 worker: Host (moode) 20161205 194042 worker: Hdwr (Pi-3B 1GB) 20161205 194042 worker: Arch (armv7l) 20161205 194042 worker: Kver (4.4.30-v7+) 20161205 194042 worker: Ktyp (Standard) 20161205 194042 worker: Gov (ondemand) 20161205 194042 worker: OS (moodeOS 1.1) 20161205 194042 worker: Rel (Moode 3.1 2016-12-05) 20161205 194042 worker: Upd (None) 20161205 194042 worker: MPD (0.19.19) 20161205 194042 worker: Session loaded 20161205 194042 worker: Debug logging (off) 20161205 194042 worker: File check... 20161205 194043 worker: File check ok 20161205 194043 worker: Auto-shuffle deactivated 20161205 194043 worker: USB sources (none attached) 20161205 194043 worker: MPD scheduler policy (time-share) 20161205 194043 worker: MPD started 20161205 194043 worker: wlan0 exists 20161205 194043 worker: wlan0 AP mode started 20161205 194115 worker: HDMI port on 20161205 194115 worker: Audio (I2S audio device) 20161205 194115 worker: Audio (HiFiBerry Digi+ Pro) 20161205 194115 worker: ALSA outputs unmuted 20161205 194115 worker: ALSA mixer name (Digital) 20161205 194115 worker: MPD volume control (disabled) 20161205 194115 worker: MPD output 1 ALSA default (enabled) 20161205 194115 worker: MPD output 2 ALSA crossfeed (disabled) 20161205 194115 worker: Hdwr volume controller not detected 20161205 194115 worker: Volume level (0) restored 20161205 194115 worker: wlan0 wait 1 for address 20161205 194118 worker: wlan0 (172.24.1.1) 20161205 194118 worker: eth0 exists 20161205 194118 worker: eth0 wait 1 for address 20161205 194121 worker: eth0 wait 2 for address 20161205 194124 worker: eth0 wait 3 for address 20161205 194127 worker: eth0 address not assigned 20161205 194128 worker: NAS sources (none configured) 20161205 194128 worker: MPD consume reset to off 20161205 194128 worker: MPD crossfade (off) 20161205 194128 worker: Watchdog started 20161205 194128 worker: End startup 20161205 194128 worker: Ready Link to comment
josephjosephjoe Posted January 2, 2017 Share Posted January 2, 2017 Just to be clear I am aware that the digi+ pro is not a dac, I called it that by accident! I'm running it via spdif into my peachtree audio dac/amp combo. Thanks again ! Link to comment
TimCurtis Posted January 2, 2017 Share Posted January 2, 2017 Thanks so much Tim! 20161205 194040 worker: Startup 20161205 194042 worker: Host (moode) 20161205 194042 worker: Hdwr (Pi-3B 1GB) 20161205 194042 worker: Arch (armv7l) 20161205 194042 worker: Kver (4.4.30-v7+) 20161205 194042 worker: Ktyp (Standard) 20161205 194042 worker: Gov (ondemand) 20161205 194042 worker: OS (moodeOS 1.1) 20161205 194042 worker: Rel (Moode 3.1 2016-12-05) 20161205 194042 worker: Upd (None) 20161205 194042 worker: MPD (0.19.19) 20161205 194042 worker: Session loaded 20161205 194042 worker: Debug logging (off) 20161205 194042 worker: File check... 20161205 194043 worker: File check ok 20161205 194043 worker: Auto-shuffle deactivated 20161205 194043 worker: USB sources (none attached) 20161205 194043 worker: MPD scheduler policy (time-share) 20161205 194043 worker: MPD started 20161205 194043 worker: wlan0 exists 20161205 194043 worker: wlan0 AP mode started 20161205 194115 worker: HDMI port on 20161205 194115 worker: Audio (I2S audio device) 20161205 194115 worker: Audio (HiFiBerry Digi+ Pro) 20161205 194115 worker: ALSA outputs unmuted 20161205 194115 worker: ALSA mixer name (Digital) 20161205 194115 worker: MPD volume control (disabled) 20161205 194115 worker: MPD output 1 ALSA default (enabled) 20161205 194115 worker: MPD output 2 ALSA crossfeed (disabled) 20161205 194115 worker: Hdwr volume controller not detected 20161205 194115 worker: Volume level (0) restored 20161205 194115 worker: wlan0 wait 1 for address 20161205 194118 worker: wlan0 (172.24.1.1) 20161205 194118 worker: eth0 exists 20161205 194118 worker: eth0 wait 1 for address 20161205 194121 worker: eth0 wait 2 for address 20161205 194124 worker: eth0 wait 3 for address 20161205 194127 worker: eth0 address not assigned 20161205 194128 worker: NAS sources (none configured) 20161205 194128 worker: MPD consume reset to off 20161205 194128 worker: MPD crossfade (off) 20161205 194128 worker: Watchdog started 20161205 194128 worker: End startup 20161205 194128 worker: Ready Hi Joe, Log looks ok. Email me and I'll help troubleshoot :-) -Tim Enjoy the Music ! http://moodeaudio.org http://twitter.com/MoodeAudio Link to comment
mocenigo Posted January 5, 2017 Share Posted January 5, 2017 Hi - I have encountered a strange problem. I am in the process of ripping my whole CD and SACD collection (about 5000 discs) and I am very close to the end, at around 71.000 tracks. After adding some tracks, the web browser cannot load it. After updating the database, the Library pane remains with "LIBRARY LOADING” forever - it cannot display any list. This is with any browser I have. If I remove a few, it loads again. Is there a solution to this? It is sort of a deal-breaker. Link to comment
TimCurtis Posted January 5, 2017 Share Posted January 5, 2017 Hi - I have encountered a strange problem. I am in the process of ripping my whole CD and SACD collection (about 5000 discs) and I am very close to the end, at around 71.000 tracks. After adding some tracks, the web browser cannot load it.After updating the database, the Library pane remains with "LIBRARY LOADING” forever - it cannot display any list. This is with any browser I have. If I remove a few, it loads again. Is there a solution to this? It is sort of a deal-breaker. Hi, You can try bumping up MPD max_output_buffer_size setting in /etc/mpd.conf. Restart MPD after making change. -Tim Enjoy the Music ! http://moodeaudio.org http://twitter.com/MoodeAudio Link to comment
mocenigo Posted January 5, 2017 Share Posted January 5, 2017 Hi,You can try bumping up MPD max_output_buffer_size setting in /etc/mpd.conf. Restart MPD after making change. -Tim Thank you for the suggestion, but it does not seem to work... I have doubled and also trebled the value. It was originally 81920, then I inserted 163840, and even 245760 - each time restarting MPD - to no improvement :-( Roberto Link to comment
TimCurtis Posted January 5, 2017 Share Posted January 5, 2017 Thank you for the suggestion, but it does not seem to work... I have doubled and also trebled the value. It was originally 81920, then I inserted 163840, and even 245760 - each time restarting MPD - to no improvement :-( Roberto Hi Roberto, I'm just guessing that the "Library not loading" symptom is due to exceeding a resource limit on the server. There are a few other server-side settings that could be tried. They are in the file /etc/php5/fpm/php.ini Try bumping max_execution_time and changing memory_limit to -1 (no limit), then reboot. -Tim Enjoy the Music ! http://moodeaudio.org http://twitter.com/MoodeAudio Link to comment
franz159 Posted January 6, 2017 Share Posted January 6, 2017 MQA question for Tim: any plan to implement "MQA decoding" functionality in Moode? Link to comment
TimCurtis Posted January 6, 2017 Share Posted January 6, 2017 MQA question for Tim: any plan to implement "MQA decoding" functionality in Moode? I'd suggest posting question about this codec on MPD forum because if its not supported in MPD then Moode can't make use of it. -Tim Enjoy the Music ! http://moodeaudio.org http://twitter.com/MoodeAudio Link to comment
mocenigo Posted January 6, 2017 Share Posted January 6, 2017 Hi Roberto,I'm just guessing that the "Library not loading" symptom is due to exceeding a resource limit on the server. There are a few other server-side settings that could be tried. They are in the file /etc/php5/fpm/php.ini Try bumping max_execution_time and changing memory_limit to -1 (no limit), then reboot. -Tim HI. I bumped max_execution_time to 360 (from 180) and doubled memory_limit - and this worked with the track set that failed yesterday. Thank you! I may have to increase the limits further in the near future - I do have a second library of about 3000 jazz records and I was keeping them separate because of the limits, but now that I know how to overcome them... Roberto Link to comment
Gabriele Fubiani Posted January 6, 2017 Share Posted January 6, 2017 Ciao a tutti sono nuovo dall'Italia. Sto provando MOODE AUDIO con RASPBERRY 3 + DIGI + PRO. Il sistema è connesso ad un MARANTZ HD 1 DAC. MOODE AUDIO , è l'unico che funziona con questa schedina DIGI + PRO , e suona molto bene. Avrei bisogno di capire come far riconoscere al sistema ,un NAS WD MY BOOK LIVE. Se qualcuno puo aiutarmi ,ne saro' grato. Ciao Hello to allI am back from Italy.I'm trying moode AUDIO RASPBERRY with DIGI + 3 + PRO.The system is connected to an HD MARANTZ 1 DAC.Moode AUDIO, is the only one that works with this coupon DIGI + PRO, and it sounds very good.I would need to understand how to recognize the system, a WD MY BOOK LIVE NAS.If anyone can help me, I'll be 'grateful.Hello Link to comment
franz159 Posted January 7, 2017 Share Posted January 7, 2017 Ciao a tutti sono nuovo dall'Italia. Sto provando MOODE AUDIO con RASPBERRY 3 + DIGI + PRO. Il sistema è connesso ad un MARANTZ HD 1 DAC. MOODE AUDIO , è l'unico che funziona con questa schedina DIGI + PRO , e suona molto bene. Avrei bisogno di capire come far riconoscere al sistema ,un NAS WD MY BOOK LIVE. Se qualcuno puo aiutarmi ,ne saro' grato. Ciao Hello to allI am back from Italy.I'm trying moode AUDIO RASPBERRY with DIGI + 3 + PRO.The system is connected to an HD MARANTZ 1 DAC.Moode AUDIO, is the only one that works with this coupon DIGI + PRO, and it sounds very good.I would need to understand how to recognize the system, a WD MY BOOK LIVE NAS.If anyone can help me, I'll be 'grateful.Hello Hi Gabriele, I'm confident somebody more knowledgeable than me on NAS will be able to give you some hint on the quickest way to connect your "WD MY BOOK LIVE NAS" to Moode. Link to comment
frengo Posted January 10, 2017 Share Posted January 10, 2017 Hello everyone, I'm a new user from Italy, my nick is "Frengo" and are very fond of music (any genre as long as it feel good on my old Marantz 4140). I'm happy to be in the forum where we can speaking directly with Tim Curtis, the Moode Developer, (I can't ask better) . So I just installed Moode on my Raspberry PI2 with HiFiberry Dac+ and I put all my CDs on an hard drive in liquid format (FLAC, SACD, DSF, DTS). I noted that everything worked at the first shot. I would now accompany the player with a 7-inch TFT display and an infrared remote control for a stand-alone installation on my car. This display would be fine ? Innolux AT070TN92 V.X AT070TN92 VX 7'' 800X480 TFT LCD Screen Display | eBay I would like to know if exist a downloadable .img Moode file that includes the display drivers and that I can flash it on my SD card, or alternatively if someone can direct me to a simple and valid tutorial for the installation of this display and IR remote control (better if exist a way to connect also a small keypad with five buttons: Play/Pause, Stop, Next Track, Previous Track, Volume +/-). Surely You can help me... Have a good day and THANK YOU Link to comment
TimCurtis Posted January 10, 2017 Share Posted January 10, 2017 Hello everyone, I'm a new user from Italy, my nick is "Frengo" and are very fond of music (any genre as long as it feel good on my old Marantz 4140).I'm happy to be in the forum where we can speaking directly with Tim Curtis, the Moode Developer, (I can't ask better) . So I just installed Moode on my Raspberry PI2 with HiFiberry Dac+ and I put all my CDs on an hard drive in liquid format (FLAC, SACD, DSF, DTS). I noted that everything worked at the first shot. I would now accompany the player with a 7-inch TFT display and an infrared remote control for a stand-alone installation on my car. This display would be fine ? Innolux AT070TN92 V.X AT070TN92 VX 7'' 800X480 TFT LCD Screen Display | eBay I would like to know if exist a downloadable .img Moode file that includes the display drivers and that I can flash it on my SD card, or alternatively if someone can direct me to a simple and valid tutorial for the installation of this display and IR remote control (better if exist a way to connect also a small keypad with five buttons: Play/Pause, Stop, Next Track, Previous Track, Volume +/-). Surely You can help me... Have a good day and THANK YOU Hi, Just an FYI that Moode UI is designed for 4:3 aspect ratio (iPad, iPad mini). Displays such as 7" Raspberry Pi Touch screen are 16:10 a/r which results in Moode UI being cut off on the bottom requiring scrolling. -Tim Enjoy the Music ! http://moodeaudio.org http://twitter.com/MoodeAudio Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now