Kalpesh Posted July 19, 2023 Share Posted July 19, 2023 Success ! Studio M1 MAx can upsample DSD 64 2.0 + convolution @512 with 7EC Light Miska 1 Link to comment
Kalpesh Posted July 19, 2023 Share Posted July 19, 2023 @Miska how far is too far ? I'm thinking of : Having a dedicated Desktop setting for DSD sources with 6 types of convolution .wav pairs (Katz, BK, Trained listeners etc) 44.1 based + Having a dedicated Desktop setting for PCM sources with my previous design (base .txt, VBA as .wav 48 based, tailored (or not) per disk my Cello+.txt) or Having a dedicated Desktop setting for DSD sources with 6 types of convolution .wav pairs (Katz, BK, Trained listeners etc) 44.1 based +Having a dedicated Desktop setting for PCM sources with 6 types of convolution .wav pairs (Katz, BK, Trained listeners etc) 44.1 AND 48 based + a seventh entry, say with BK convolution, as .wav + my Cello+.txt whenever I have to correct the mastering, not just try to figure out the mastering monitors settings or Just having 6 types of convolution .wav pairs (Katz, BK, Trained listeners etc) 44.1 based (for the sake of minimising the load with DSD sources), thus even for PCM 48 based, + a seventh entry, say with BK convolution, as .wav + my Cello+.txt whenever I have to correct the mastering, not just try to figure out the mastering monitors settings Link to comment
Miska Posted July 19, 2023 Share Posted July 19, 2023 10 hours ago, Kalpesh said: @Miska how far is too far ? I'm thinking of : You can have as many profiles as you like of course. But I don't think it is necessary to have 44.1k and 48k family settings. In optimal case you would have your convolution filters for 352.8k rate only. At the time of processing, it doesn't matter much from convolution filter point of view, because the convolution filter is pre-processed to be suitable for the source content before any playback begins. Markus8 1 Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Kalpesh Posted July 19, 2023 Share Posted July 19, 2023 1 hour ago, Miska said: You can have as many profiles as you like of course. But I don't think it is necessary to have 44.1k and 48k family settings. In optimal case you would have your convolution filters for 352.8k rate only. At the time of processing, it doesn't matter much from convolution filter point of view, because the convolution filter is pre-processed to be suitable for the source content before any playback begins. Thank you. 352.8 passed the test (64 to 512 SDM) ; thus I will create a unique set of convolution filters at 352.8 for any source. As of what happens at time of processing, having a single .wav (per channel) made the huge difference of 512 OK vs only 128 OK with a mix of .wav and .txt ; so I'm not sure I ever correctly understood/interpreted "the convolution filter is pre-processed to be suitable for the source content before any playback begins" ! Link to comment
dericchan1 Posted July 19, 2023 Share Posted July 19, 2023 2 hours ago, Miska said: You can have as many profiles as you like of course. But I don't think it is necessary to have 44.1k and 48k family settings. In optimal case you would have your convolution filters for 352.8k rate only. At the time of processing, it doesn't matter much from convolution filter point of view, because the convolution filter is pre-processed to be suitable for the source content before any playback begins. @Miska can you please explain Is there any advantage for using 352.8k vs 384k? Also does it mean I don’t need to enable “hf expansion” at either sampling rate? thanks Deric Link to comment
Miska Posted July 19, 2023 Share Posted July 19, 2023 2 hours ago, Kalpesh said: As of what happens at time of processing, having a single .wav (per channel) made the huge difference of 512 OK vs only 128 OK with a mix of .wav and .txt ; so I'm not sure I ever correctly understood/interpreted "the convolution filter is pre-processed to be suitable for the source content before any playback begins" ! .txt, or other parametric EQ are processed as IIR biquads. Not as convolution filter. You can combine both convolution filters and those parametric EQs, but they are processed separately. Only wav are convolution filters. Every other plugin is something different (wav goes to convolution plugin and txt goes to iir plugin). Kalpesh 1 Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Popular Post Miska Posted July 19, 2023 Popular Post Share Posted July 19, 2023 30 minutes ago, dericchan1 said: @Miska can you please explain Is there any advantage for using 352.8k vs 384k? Also does it mean I don’t need to enable “hf expansion” at either sampling rate? AFAIK, nobody is selling 384k PCM, but 352.8k PCM is common (DXD). 352.8k is also integer multiple of DSD content available. And it is also integer multiple of 44.1k RedBook which is the most common format. It's response also covers enough audio bandwidth (176.4 kHz) for any imaginable music recording, so you don't need HF Expansion. Kalpesh, Tihon and dericchan1 1 2 Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 7 hours ago, Miska said: AFAIK, nobody is selling 384k PCM, but 352.8k PCM is common (DXD). 352.8k is also integer multiple of DSD content available. And it is also integer multiple of 44.1k RedBook which is the most common format. It's response also covers enough audio bandwidth (176.4 kHz) for any imaginable music recording, so you don't need HF Expansion. otoh, 24/96 is the trending format (for what I listen to at least), 48 the base format in REW : here are 2 reasons to go 48 based but if it doesn't affect SQ or create undue load, let's go 352.8 ! Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 12 hours ago, Miska said: .txt, or other parametric EQ are processed as IIR biquads. Not as convolution filter. You can combine both convolution filters and those parametric EQs, but they are processed separately. Only wav are convolution filters. Every other plugin is something different (wav goes to convolution plugin and txt goes to iir plugin). Jussi, I have a tremendous respect for you and I have purchased 4 or 5 HQP licences so far so please allow me to express a serious disappointment : I have posted numerous claims that my performance with DSD sources was really bad I have explained how I do DRC, I'm pretty sure I can dig out at least one of your posts where you acknowledge and approve my use of .txt I have lost hours looking for a solution, including searching for a beefier Mac in my budget And at the present time I type while my MMM1 plays DSD 64 source +convolution @ 256 (+ in total wifi mode since the ethernet cables are now plugged in the Studio) and my predicament is do I keep the Studio ? do I cancel the sale of my MMM1 that I just sold after lowering the price to 390 € ? I purchased the Studio because I was limited to ASDM7 @ 64 with DSD sources ; I would have never bothered knowing my MMM1 plays DSD 64 +convolution @ 256, that all I had to do was use .wav convolution instead of .txt based correction. + I have little dropouts @512 with the Studio since I installed Roon, even with Roon closed and after reboot... Link to comment
Miska Posted July 20, 2023 Share Posted July 20, 2023 1 hour ago, Kalpesh said: I have explained how I do DRC, I'm pretty sure I can dig out at least one of your posts where you acknowledge and approve my use of .txt Yes, it is fine. 1 hour ago, Kalpesh said: do I keep the Studio ? do I cancel the sale of my MMM1 that I just sold after lowering the price to 390 € ? I don't know, only you can test your setup and see what can possibly do what you are looking for. And only you can decide what kind of hardware you want to use. If there's no Mac that can do what you want, there may be a PC setup with GPU that can do it. 1 hour ago, Kalpesh said: + I have little dropouts @512 with the Studio since I installed Roon, even with Roon closed and after reboot... I always run Roon on my ancient i5 NUC, under Debian Linux. Nothing else on that machine. But I rarely use it. Only if I happen to want to listen something from Tidal. Quote please allow me to express a serious disappointment Hardware manufacturers are correct address for that. I don't sell hardware... Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Miska Posted July 20, 2023 Share Posted July 20, 2023 6 hours ago, Kalpesh said: otoh, 24/96 is the trending format (for what I listen to at least), 48 the base format in REW : here are 2 reasons to go 48 based but if it doesn't affect SQ or create undue load, let's go 352.8 ! HQPlayer will adapt the convolution filters to what ever sampling rate the source content is. 384k as filter rate doesn't make sense, since it doesn't match any (?) commercially available content. With REW, you don't need to unnecessarily convert the sampling rate agnostic parametric EQ's to sampling rate bound convolution filters. So with REW I always just export the filters natively as .txt (instead of converting to .wav). Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 21 minutes ago, Miska said: Yes, it is fine. I don't know, only you can test your setup and see what can possibly do what you are looking for. And only you can decide what kind of hardware you want to use. If there's no Mac that can do what you want, there may be a PC setup with GPU that can do it. I always run Roon on my ancient i5 NUC, under Debian Linux. Nothing else on that machine. But I rarely use it. Only if I happen to want to listen something from Tidal. Hardware manufacturers are correct address for that. I don't sell hardware... I have not been straight enough : your assistance I usually praise failed here. You were the right person to point out that being limited to ASDM 7 64 output only from 64 source with a MMM1 is seriously wrong and help me sort out what the issue was. Especially since I posted a lot about my way to do correction and my performance issues. Now we know it was because I was using convolution plugin for my wav file + iir plugin for the .txt, that was the cause of too high a burden, it's a HQPlayer usage cause, not something to be dealt on the hardware side. Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 13 minutes ago, Miska said: With REW, you don't need to unnecessarily convert the sampling rate agnostic parametric EQ's to sampling rate bound convolution filters. So with REW I always just export the filters natively as .txt (instead of converting to .wav). That's the advice I followed but with the combination of a .wav for VBA. Link to comment
Popular Post Miska Posted July 20, 2023 Popular Post Share Posted July 20, 2023 19 minutes ago, Kalpesh said: I have not been straight enough : your assistance I usually praise failed here. You were the right person to point out that being limited to ASDM 7 64 output only from 64 source with a MMM1 is seriously wrong and help me sort out what the issue was. Especially since I posted a lot about my way to do correction and my performance issues. I have to say I don't like answering any questions regarding "what computer hardware I should buy". Many times I don't answer such questions at all. I can only tell what works for me, for my setups. I cannot promise what will work for someone else, with some other configuration, because I have not personally tested that precise setup. I don't have your convolution files, your IIR files, and your overall system setup. I have no way of knowing what exactly will or won't work. You have to test it yourself. I have told you what works for me, it is still no guarantee that even same thing would work in your network environment etc. 19 minutes ago, Kalpesh said: Now we know it was because I was using convolution plugin for my wav file + iir plugin for the .txt, that was the cause of too high a burden, it's a HQPlayer usage cause, not something to be dealt on the hardware side. It is perfectly fine. It is precisely something to be dealt with hardware side. You just need fast enough computer. Or you need to lower/reduce what you are asking your computer to compute. "Too high burden" just means you are asking too much from your hardware, it doesn't mean it would be generally the case. If you have limited computing resources, you need to adapt your computing request to something it can handle. Or you need more computing resources. You could have more success with latest top of the line Intel or AMD CPUs. Mac CPUs are per core more than 50% shy of those... StreamFidelity, bogi and Tihon 3 Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Miska Posted July 20, 2023 Share Posted July 20, 2023 And what comes to my "approval" of some DSP setup is consideration from signal fidelity point of view. Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 15 minutes ago, Miska said: It is perfectly fine. It is precisely something to be dealt with hardware side. You just need fast enough computer. Or you need to lower/reduce what you are asking your computer to compute. "Too high burden" just means you are asking too much from your hardware, it doesn't mean it would be generally the case. If you have limited computing resources, you need to adapt your computing request to something it can handle. Or you need more computing resources. You could have more success with latest top of the line Intel or AMD CPUs. Mac CPUs are per core more than 50% shy of those... Your answers are really disappointing... I have now (or before Roon) reached : 7EC 512 output including with DSD 64 source on Mac platform ; that's good enough for me, I'm not interested in Intel or AMD I could have enjoyed (and be happy and not bother upgrading) 7EC 256 output including with DSD 64 source with MMM1 since Light variant inception, provided you gave in time the assistance you gave me with the Studio Link to comment
Miska Posted July 20, 2023 Share Posted July 20, 2023 23 minutes ago, Kalpesh said: I have now (or before Roon) reached : 7EC 512 output including with DSD 64 source on Mac platform ; that's good enough for me, I'm not interested in Intel or AMD I could have enjoyed (and be happy and not bother upgrading) 7EC 256 output including with DSD 64 source with MMM1 since Light variant inception, provided you gave in time the assistance you gave me with the Studio I don't understand what you are disappointed at? I have only ever told you what works for me. And you have been all the time trying to run something else than what I have said works for me. Then you figured out yourself that you are asking too much from the Studio... Rest is your decision what you are happy with. bogi 1 Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 47 minutes ago, Miska said: I don't understand what you are disappointed at? I have only ever told you what works for me. And you have been all the time trying to run something else than what I have said works for me. Then you figured out yourself that you are asking too much from the Studio... Rest is your decision what you are happy with. I'm disappointed you did not bother help me find out why I was stuck with ASDM7 @ 64 output from 64 source with a MMM1 while I can now, simply with a new scheme for room correction, reach 7EC Light @ 256. What I'm asking from the Studio is not the point ; the point is that you did not bother helping me get what I could get from a MMM1 can't you just say, sorry, I did not figure out that using 2 plugins instead of one for eQ could be the cause ? Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 To reset the mood positively : To my ears, Studio vs MMM1 8 Go RAM is worth it, the sound is definitely classier, once you have dug it, there's no coming back (because of 512 vs 256 or less memory swapping, power supply ???) Listening to Qobuz is a much much smoother experience The culprit for interrupts was not Roon but an aborted installation of Rogue Amoeba's Audio Hijack. I aborted when asked to circumvent security to install their Audio Content Extractor in Kernel : not worth it IMO. Nevertheless I had to follow the manual uninstall procedure for removing ACE driver and Launch deamons. I take the time to explain for I had Audio Hijack installed on the MMM1 (back then I did not receive as terrifying messages from the system nor followed the physical restart procedure now required). So I can't rule out that some limitations and dropouts with the MMM1 was sometimes due to A H's Audio Content Extractor. Link to comment
Miska Posted July 20, 2023 Share Posted July 20, 2023 5 hours ago, Kalpesh said: What I'm asking from the Studio is not the point ; the point is that you did not bother helping me get what I could get from a MMM1 How!? In addition, just for fun, imagine yourself trying to answer about 100 questions per day, do software development, and pretty much everything else involved. Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Kalpesh Posted July 20, 2023 Share Posted July 20, 2023 49 minutes ago, Miska said: How!? In addition, just for fun, imagine yourself trying to answer about 100 questions per day, do software development, and pretty much everything else involved. How!? That's called Support And maybe you should do yourself a favour and organise a wiki, a FAQ, what have you, for the redundant questions you answer to zillions times, and create tickets/flag for new issues coming and then nurture the wiki, FAQ, what have you, Link to comment
Popular Post bogi Posted July 20, 2023 Popular Post Share Posted July 20, 2023 6 hours ago, Kalpesh said: I'm disappointed you did not bother help me find out why I was stuck with ASDM7 @ 64 output from 64 source with a MMM1 while I can now, simply with a new scheme for room correction, reach 7EC Light @ 256. What I'm asking from the Studio is not the point ; the point is that you did not bother helping me get what I could get from a MMM1 can't you just say, sorry, I did not figure out that using 2 plugins instead of one for eQ could be the cause ? Quite generally, this is a discussion forum thread. AS forum is not an official HQPlayer support channel. You can only thank Miska for his answers to your questions here. He does not need to be present here and react to your posts. You had the opportunity to try HQPlayer before you purchased your license(s). Your purchases were your decision. By purchasing your licenses you agreed with EULA which is part of HQPlayer installation. Read that EULA. It looks to me you are demanding level of support which was never promised. The idea of discussion forum is that people help each other when they want. It's not about demanding help and expressing disappointment if somebody else does not solve your issue faster than you. Your contributions would be more valuable if you would rather describe your '2 plugins instead of one' experience in an easy to read and helpful form for others. OzarkMtn, Louisiana, Tihon and 1 other 1 3 i7 11850H + RTX A2000 Win11 HQPlayer ► Topping HS02 ► 2x iFi iSilencer ► SMSL D300 ► DIY headamp DHA1 ► HiFiMan HE-500 Link to comment
Popular Post copy_of_a Posted July 20, 2023 Popular Post Share Posted July 20, 2023 9 minutes ago, Kalpesh said: How!? That's called Support And maybe you should do yourself a favour and organise a wiki, a FAQ, what have you, for the redundant questions you answer to zillions times, and create tickets/flag for new issues coming and then nurture the wiki, FAQ, what have you, Ridiculous - stop it please! Rarely have I experienced such a great, responsive and competent support like Miska provides for his products. Completely weird and inordinate expectations on behalf of you. bogi, OzarkMtn, dc-audiogeek and 5 others 8 _ Link to comment
Miska Posted July 20, 2023 Share Posted July 20, 2023 18 minutes ago, Kalpesh said: How!? That's called Support So I would travel to your house, and we would try together with your settings to see if some setting combinations work or don't. So I would be just holding your hand. But for that, I would need to increase price of HQPlayer by 100x at least. 18 minutes ago, Kalpesh said: And maybe you should do yourself a favour and organise a wiki, a FAQ, what have you, for the redundant questions you answer to zillions times, and create tickets/flag for new issues coming and then nurture the wiki, FAQ, what have you, You could consider this forum as such? Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now