ted_b Posted August 7, 2021 Share Posted August 7, 2021 So, on recommendation of several respectable AS folks I bought a Fitlet2 (Intel NUC, Atom x7-e3950 with SFP+ port). I have connected it to my Mikrotik CSS610 switch, using existing SFP modules and both single mode and multimode fiber. I then boot up the unit into NAA using Jussi's USB image. All seems well (I've used this image on my @lmitche-built NUC before, now a Roon server, and it worked very well). I cannot, for the life of me, get HQPlayer to see this thing. I've tried via SFP (Mikrotik webpage shows link at 1G, full duplex, flow controls on), via rj45 and yet neither show up via HQPlayer. When I, instead, load the image on the previously mentioned NUC I use (normally) for a Roon server HQplayer sees it immediately and works just fine, thank you. Any ideas? I know folks here have done it successfully but I am clearly missing something. Any help is appreciated. I may swap USB ports and try again. Stay tuned. Thx Edit: swapping USB ports did nothing. Argh! "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
jabbr Posted August 7, 2021 Share Posted August 7, 2021 So, the NUC that is working is plugged into the same switch? How are thee NUC and fitlet2 IP addresses assigned? what are they and what is the IP address of the HQPlayer server? I am guessing that this is a networking issue. also check $ lsusb on the fitlet to be sure the DAC is being recognized. Custom room treatments for headphone users. Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 NUC, fitlet2, HQP server and my Win7 desktop (typing this) are all connected to the Mikrotik, which hangs off a router (modem/router gateway) port. All four have ip addresses 10.0.0.x (NUC is 7, fitlet2 is 229, Win7 desktop is 228, switch is 185, HQP server is 196) and all are DHCP. I need to go find NAA sign in credentials to do lsusb. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
jabbr Posted August 7, 2021 Share Posted August 7, 2021 yeah set up so you can SSH into fitlet2 so you can do stuff.... try: $ sudo lsusb $ sudo systemctl enable networkaudiod $ sudo systemctl restart networkaudiod then for kicks $ ping 10.0.0.196 Custom room treatments for headphone users. Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 I think my syntax is wrong. I'm getting not found for everything. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
jabbr Posted August 7, 2021 Share Posted August 7, 2021 Ok ... i think i automatically upgraded everything to 20.04 ... try: $ apt install usbutils and then try lsusb again did you create a user when you first booted your system? I would log in under that user and then sudo, rather than logging in as root is the NAA Jussi's image or the Linux Mint that came with the fitlet? ... OOPS I see that now ... I can't help If its the NAA image then we need to ask @Miska I've done everything using Ubuntu Sorry about that, I think the NAA thread is the best place ask ... Custom room treatments for headphone users. Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 I was able to ping Hqplayer server and it sent a line of 64 bytes of data ad nauseum times until I pulled the fiber cable out. I was able to run "enable networkaudiod" and then when I tried to "restart" it I got an error message saying When I tried installing usbutils I got the not found response, regardless of $ or not. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
jabbr Posted August 7, 2021 Share Posted August 7, 2021 Let me clarify how I did it with the fitlet2 1) Ordered with Linux Mint installed. 2) Upgraded when I got it and just after I first booted it. 3) Downloaded and installed the NAA package 4) Rebooted Custom room treatments for headphone users. Link to comment
jabbr Posted August 7, 2021 Share Posted August 7, 2021 1 minute ago, ted_b said: I was able to ping Hqplayer server and it sent a line of 64 bytes of data ad nauseum times until I pulled the fiber cable out. I was able to run "enable networkaudiod" and then when I tried to "restart" it I got an error message saying Scratch above recs, I was assuming an NAA package install on Ubuntu/Mint Custom room treatments for headphone users. Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 There are dozens of NAA threads; I didn't think the "best NAA" thread,. where this started, was the place for me to troubleshoot so I started my own. Thx "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
jabbr Posted August 7, 2021 Share Posted August 7, 2021 This is the post where I discussed how I got the fitlet2 up and running: ted_b 1 Custom room treatments for headphone users. Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 Jabbr, I am not married to Jussi's image. I bought this fitlet2 from recommendations of folks like you...if you have a tried and true way to get my NAA up and running, let's chat offline PM. Thx "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 We are crossing posts. 🙂 I will attempt to do the Mint upgrade (mine came with Mint, too) and go that route, and report back. Once NAA is installed does it just boot up to an NAA or does it require a monitor or tightvnc type app to manage? "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
ericuco Posted August 7, 2021 Share Posted August 7, 2021 5 minutes ago, jabbr said: Let me clarify how I did it with the fitlet2 1) Ordered with Linux Mint installed. 2) Upgraded when I got it and just after I first booted it. 3) Downloaded and installed the NAA package 4) Rebooted I ordered my fitlet2 without any OS. Installed Win10 Pro but could never get it to work. Gave up on Win10 after a few days, downloaded Linux Mint, installed on USB stick usin etcher, booted fitlet2 from stick. After booting up, there was a desktop icon to install Linux Mint on internal SSD which I did. Rebooted using internal SSD, did updates, installed ssh and NAA. Done. Worked flawless ever since. jabbr 1 Eric Audio System Link to comment
jabbr Posted August 7, 2021 Share Posted August 7, 2021 Here is how to install Mint: https://fit-pc.com/wiki/index.php?title=Intel:_Installing_Linux_Mint_20&mobileaction=toggle_view_mobile My directions above: just follow them (i.e. install openssh-server) and you can SSH into the fitlet2 to manage. It doesn't need much management. @ted_b: these discussions are valuable for everyone! vgrubb 1 Custom room treatments for headphone users. Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 As I mentioned above, I ordered mine with Mint. I will follow your directions on the other thread. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
Popular Post ericuco Posted August 7, 2021 Popular Post Share Posted August 7, 2021 5 minutes ago, jabbr said: you can SSH into the fitlet2 I use PuTTY to SSH into fitlet2 from a Win10 laptop, just need IP address of fitlet2. Works great. To update & upgrade: sudo apt update && sudo apt upgrade ted_b and jabbr 2 Eric Audio System Link to comment
ted_b Posted August 7, 2021 Author Share Posted August 7, 2021 I have Linux Mint 20.1 (I'm on the welcome screen). Do I need to update before going to get NAA? "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
ericuco Posted August 7, 2021 Share Posted August 7, 2021 10 minutes ago, ted_b said: I have Linux Mint 20.1 (I'm on the welcome screen). Do I need to update before going to get NAA? Doing an update & upgrade are recommended In Terminal window, type: sudo apt update && sudo apt upgrade Eric Audio System Link to comment
ted_b Posted August 8, 2021 Author Share Posted August 8, 2021 I've gotten to the last stage $ sudo dpkg -i networkaudiod_4.1.1-47_amd64.deb and I am stuck at the NAA license agreement. No input seems to make it go away. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
Popular Post ted_b Posted August 8, 2021 Author Popular Post Share Posted August 8, 2021 Closed the terminal, redid the dpkg and rebooted the fitlet2. Music is flowing and all is good!! Thanks so much to @jabbr and @ericucofor their patience and guidance. So......at this moment we know the fitlet2 with SFP card can be a very inexpensive NAA platform. We know the NAA runs beautifully under Linux Mint. What we don't yet know is if Jussi's NAA image (HQP OS) is compatible. I'm sure my issues were 80% user error. If Jussi sees this, maybe I'll give it another try, knowing I can easily reboot to the installed Linux Mint NAA. ericuco and bibo01 2 "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
ted_b Posted August 8, 2021 Author Share Posted August 8, 2021 Oops, I have one more thing to confirm for this thread...whether this Intel fitlet2 can support 32fs on my Holo May. All of this was done on the office setup (original Holo Spring KTE into Schitt Jot-R/RAAL system). Now we bring all this down to the new audio room. Stay tuned. Also...a weirdism here. Only my older multimode (aqua) fiber was able to communicate. The newest fiber I bought, single mode (yellow) doesn't cut it. ? I will need to replace my single mode 15M run to the lower level (for later addtl fitlet2 to be my office NAA). Nice that my old stuff works and I can use it. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
ericuco Posted August 8, 2021 Share Posted August 8, 2021 37 minutes ago, ted_b said: Only my older multimode (aqua) fiber was able to communicate. The newest fiber I bought, single mode (yellow) doesn't cut it. ? Perhaps a stupid question but you are using single mode modules with your new single mode cable? If so, what brand? Probably need to use Intel or Finisar modules. Eric Audio System Link to comment
jabbr Posted August 8, 2021 Share Posted August 8, 2021 3 hours ago, ted_b said: I've gotten to the last stage $ sudo dpkg -i networkaudiod_4.1.1-47_amd64.deb and I am stuck at the NAA license agreement. No input seems to make it go away. Generally <TAB> and it highlights <Ok> and hit return Custom room treatments for headphone users. Link to comment
ted_b Posted August 8, 2021 Author Share Posted August 8, 2021 My SFPs are Finisar and Cisco. Right now I am using Cisco and aqua colored multimode LC-LC fiber, and all is well. The single mode stuff I bought (kinda accidentally) could very well be used with different modules, and if I see the need to buy more I certainly will check the large optical networking threads for the right model numbers. Until then I'll use the combo that worked a few years ago, and seems to work now. Unless you guys say that my working multimode fiber is less than optimal...I'm all ears. This is way above my pay grade. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now