Jump to content
  • The Computer Audiophile
    The Computer Audiophile

    SOtM sMS-100 Mini Server Review

    1-Pixel.png

    thumb.jpg

    Have a good USB DAC? Check. Want to turn it into a networked device without changing one item on the DAC? Check.

     

    Over the last couple years I increasingly wanted a specific product that didn't exist. I wanted an ultra simple device with Ethernet input and USB audio output. This seems like such an obvious product that should have been available since the day the first USB DACs hit the market. Especially because so many of the network addressable DACs have big problems with file types, compression schemes, gapless playback, etc… Plus, if the sound of a specific USB DAC is what the listeners want, but they also want the functionality of a networked DAC, they should be able to bridge the gap. This isn't rocket science and this isn't the 1980s. Tiny ARM based Linux compatible single board computers are everywhere. It's time for the Internet of Things and running on this IoT are millions of tiny devices that can be used to create a simple Ethernet in and USB audio out device. As The O'Jays, The Kinks, and Sharon Jones & the Dap-Kings said, Give the People What They Want. Thus, the SOtM sMS-100 Mini Server was created. We finally have a physically simple device that converts network audio streams into USB audio streams for playback on nearly any popular USB DAC.[PRBREAK][/PRBREAK]

     

     

     

    What Is It?

     

     

    In ultra layman's terms the SOtM sMS-100 Mini Server is an Ethernet to USB converter. Plug it in to a network on one side and a USB DAC on the other side. This sounds simple enough for most people to get the essence of the sMS-100. The "inside baseball" details involved with this Ethernet to USB converter will be covered later.

     

    The SOtM sMS-100 Mini Server is a very versatile in that it that enables the listener to stream audio through the device to a USB DAC using one of several methods. The sMS-100 supports USB Audio Class 2.0 compliant DACs as well as DACs from Chord, Mytek, and the M2Tech HiFace 1 & 2. Only one streaming method can be used at a time, but the listener can switch to any of the other methods very easily. For example, the listener can start using AirPlay then switch to use UPnP / DLNA with a couple mouse clicks.

     

    SqueezeLite - When set to this mode the sMS-100 receives audio from any Logitech Media Server (LMS). LMS can be installed on any computer and most NAS drives, enabling listeners to stream from a Mac, PC, or even straight from the NAS without a traditional computer "middle man". This configuration essentially turns the sMS-100 into a modern Squeezebox replacement. iOS apps such as iPeng 7 can be used to browse an LMS library or Internet radio service and stream the audio directly to the sMS-100 for output to a USB DAC. Gapless playback of FLAC, ALAC, WAV, and AIFF is supported. DSD is supported in combination with Vortexbox 2.3 or newer, Daphile, or a custom version of LMS for Mac.

     

    AirPlay - In this mode the sMS-100 looks like an Apple AirPort Express to any audio device that supports AirPlay. These devices such as an iPhone, iPad, and computer running iTunes can stream directly to the sMS-100 the same way audio is sent to an AirPort Express. Selecting the sMS-100 as the audio end point is done via the identical process as selecting an AirPlay speaker or other AirPlay device.

     

    UPnP / DLNA - In this operating mode the sMS-100 turns into a UPnP / DLNA Renderer. Listeners can use their favorite UPnP / DLNA server such as JRiver Media Center, MinimServer, Asset UPnP, or any number of apps built-in to NAS drives from Synology, QNAP, or Thecus. In addition, the selection of a UPnP / DLNA control point (remote control) is wide open to the listener. PlugPlayer is one iOS option with some limitations while BubbleUPnP is a solid Android based option. JRemote is a solid option used in conjunction with JRiver as the media server. Gapless playback of FLAC, ALAC, WAV, and AIFF is supported as well as DSD / DoP when using a DoP compliant server such as MinimServer and JRiver Media Center. I've been told Audionet is a good option for iOS as well, but can't verify it at this time.

     

    MPD - This is a unique mode that requires the use of a Vortexbox based music server from companies such as Sonore, SOtM, and Wyred 4 Sound. The sMS-100 functions as an MPD player, but has the ability to find music stored on a Vortexbox automatically over the network. Both PCM and DSD are supported. Gapless playback of FLAC, ALAC, WAV, and AIFF is also supported.

     

    HQ Player NAA - This mode works in combination with the Sygnalyst HQ Player application. HQ Player is an advanced application capable of serious DSP. The app is a bit complex for most computer audiophiles. Nonetheless the sMS-100 can accept network audio streaming from the app.

     

     

    The SOtM sMS-100 Mini Server runs Fedora Linux as its operating system. Software named Sonic Orbiter, created by Small Green Computer, and licensed to SOtM, is what makes the sMS-100 special. Sonic Orbiter is a combination of open source and proprietary software that enables seamless switching between the aforementioned audio modes, and the ability for the sMS-100 to find networked music on a Vortextbox automatically. The selectable audio modes enable the sMS-100 to support various playback schemes supporting PCM and/or DSD with several file formats at several sample rates. In other words, Sonic Orbiter is the secret sauce of the SOtM sMS-100 Mini Server.

     

    Note: I've been working with small ARM based single board computers for years. I know exactly what it takes to create a product such as the SOtM sMS-100 Mini Server with Sonic Orbiter software. Getting such a device most of the way toward working is the easy part. Perfecting the device to support all relevant sample rates, file formats, gapless playback, without sonic dropouts, and third party USB drivers is no simple task. I mention this because invariably some readers will insist that a device like the SOtM sMS-100 Mini Server can be built easily by someone with a little Linux knowledge. In my experience getting a device to work this well is not an easy task.

     

    sMS-100_Rear-500px.jpg

     

     

     

     

    Why The Need?

     

    The need for an Ethernet to USB audio device is obvious to some and lost on others. This need came about for several reasons. First, the market for USB DACs has exploded and listeners want to take advantage of these DACs in every way possible. Second, an add-on device like the sMS-100 increases choice for consumers looking for a USB DAC with a specific sound or set of features. Third, high performing audio components with built-in Ethernet capability, like Linn, T+A, and dCS, have traditionally been much more expensive than USB DACs, plus many other expensive streamers use the same internal card from Stream Unlimited. That card brings us to the fourth reason, reliability and functionality. Many network capable devices like the Musical Fidelity M1 CLiC and PS Audio Perfect Wave Bridge have been fraught with streaming issues. Many network DACs, especially early builds, had issues leading consumers to steer toward USB DACs. That's a brief, but not exhaustive view of how we got here and why the SOtM sMS-100 Mini Server is a solution for a real audio need, not a solution looking for a problem.

     

     

     

     

    The SOtM sMS-100 Mini Server In Use

     

    app-switcher-small.pngThe SOtM sMS-100 Mini Server isn't a complete end-to-end solution. It's simply an end point or renderer that requires a server and remote control app. During the review period I tested all kinds of apps and servers using both UPnP / DLNA and Logitech Media Server (LMS). I prefer to go the UPnP / DLNA route over the LMS route because I like the server and remote control interface options much better. To be 100% honest, I'm not a big fan of LMS. But, I do understand the platform has a really large following and I can't argue with people's preferences.

     

    The configuration I used for most of the review period was a Synology DS1812+ NAS for music storage, a Windows 8.1 PC running JRiver Media Center as the DLNA server and music library curation application, and JRemote to browse and select music from an iPad. Once the SOtM sMS-100 Mini Server is connected to the network, with DLNA enabled, it appears automatically as a zone in JRiver / JRemote. Each additional SOtM sMS-100 device added to the network appears as a separate zone and JRemote has complete independent control over these zones. The sMS-100 is a very smart dumb device. Once DLNA is selected there is nothing else a user needs to configure on the unit. It acts like a "dumb" Ethernet to USB audio converter. However, the software inside the sMS-100 is far from dumb.

     

    I like to test devices like the sMS-100 not only by streaming all types of audio, but also by connecting and disconnecting DACs and pulling the power cable when I probably shouldn't cut the power. There wasn't a single thing I could do to make the sMS-100 malfunction. I started playing music with the EMM Labs DAC2X connected. I wanted to try the Berkeley Audio Design Alpha USB so I stopped playback, like any normal person would do, plugged the USB cable in to the Alpha USB, then pressed play. Playback commenced immediately. The sMS-100 didn't skip a single byte or bit. Many servers on many operating systems would struggle with this USB audio device swap and would require user intervention. There was no such issue with the sMS-100. I get that most users will have a single DAC and have no interested in hot swapping DACs. However, I described this test as an indication of the sophistication of the sMS-100 and Sonic Orbiter software.

     

    Testing audio playback with a handful of difficult or problem tracks also displayed no weakness in the sMS-100. I sent 24 bit / 192 kHz gapless tracks, high resolution tracks with multi-megabyte album art, gapless DSD, compressed and uncompressed FLAC without identifying a single issue with the sMS-100. The sMS-100 performance in this area is much like the Lumin DLNA player. The similarity between both devices is that they handle all the network audio functions with Linux based software. The major differences between the devices are functionality and price. The Lumin is a full featured DLNA renderer with DAC and iOS app for around $7,000 and the sMS-100 is a much simpler device with less functionality for $450.

     

     

    The sound quality of music played through the SOtM sMS-100 Mini Server had three distinct levels, good, better, and great. But, not all levels were present while connected to all DACs. For example, when connected to a completely isolated USB audio device such as the Alpha USB or Ayre Acoustics QB-9 the sMS-100 was only capable of great sound. The other levels of sound quality were present with unisolated devices, and depended on use of the SOtM mBPS-d2s Intelligent Battery Power Supply ($399).

     

    Listening through the sMS-100 connected directly to the EMM Labs DAC2X via USB the sound quality was good. Most of my rock and roll tracks from Pearl Jam, The White Stripes, and new 2014 Led Zeppelin 24/96 remasters had no sonic issues. When listening to Perfect Sense, Part I on Roger Waters' Amused To Death album I noticed the soundstage was reduced quite a bit from what I'm used to hearing in my system. This album features Q Sound. The voices in the begin of Perfect Sense, Part I should emanate from the far left while the piano should emanate from the far right. It's an enveloping sound when done right. In this configuration the voices barely reached outside the left side of the left speaker and the Piano wasn't nearly as far right as it should have been. Switching to Shelby Lynne's track Like A Fool, I noticed a little lack of resolution and my inability to place the instruments and vocals exactly in their familiar positions. The sound was running together a bit.

     

    In addition to receiving the sMS-100 I received the SOtM mBPS-d2s battery supply to try if I was interested. I initially planned on skipping the battery supply for this review. However, I had a gut feeling that the sonic impurities I heard we related to electrical noise. I connected the sMS-100 into the mBPS-d2s battery supply and played the same tracks through the identical system. The sound quality was quite a bit better. It was easy to hear the soundstage widen while listening to Perfect Sense, Part I and better delineation of the instruments in Like A Fool. This was a very positive improvement. But, sound quality wasn't as good as it would get with the sMS-100.

     

    Testing my theory a bit more I connected the sMS-100 without the battery supply to a Berkeley Audio Design Alpha USB converter that converts USB to AES. This converter has the best isolation of any converter I've ever used. The setup was USB out of the sMS-100 in to the Alpha USB, and AES out of the Alpha USB and in to the EMM Labs DAC2X. Playing the same tunes I immediately noticed my music come to life. The ultra wide sound stage of Q Sound and the delicate backing instruments of Shelby Lynne's band were right there in front of me. This was the sound I was searching for from the sMS-100. Continuing the evaluation I placed the mBPS-d2s battery supply back in the chain to power of the sMS-100 while still connected to the Alpha USB. This made absolutely no sonic difference. Based on this little unscientific experiment I concluded the USB output of the sMS-100 with its standard switch mode power supply is probably a bit dirty, but there are viable remedies to improve performance greatly.

     

    Logitech Media Server isn't normally that intriguing to me because I like the alternatives much better. However, there's one development that changes things a little bit. After a recent trip to Munich's high end audio show and my discussions with the team from WiMP, I rigged LMS to stream lossless 16 bit / 44.1 kHz music from WiMP's HiFi service in Norway and controlled playback from my iPad using the iPeng 7 app. It wasn't the ideal solution, but it enabled me to stream from a collection of over twenty million bit transparent lossless tracks. In the coming months and years there will be several variations of this type of system that enable streaming lossless CD quality and higher resolutions. I enjoyed WiMP through LMS, but moved away from it eventually because the iPeng 7 interface with WiMP leaves a bit to be desired (the same can be said for the official Logitech iOS app) and the WiMP / Sonos interface). While in Munich I talked to a couple people who used this exact setup WiMP / LMS / iPeng 7 and they were completely satisfied with the interface. Again, I can't argue with people's preferences.

     

     

     

     

    Conclusion

     

    cash-logo-black-thumb.jpgStreaming via DLNA, LMS, AirPlay, NAA, and even from lossless cloud based services through the SOtM sMS-100 Mini Server is terrific. Audio isn't a one size fits all hobby. Some people love Logitech Media Server while others prefer DLNA streaming. Yet others prefer to stream podcasts from iTunes via AirPlay to the sMS-100 then switch to DLNA for the serious stuff. The sMS-100 makes all of these use cases possible and simple to execute with excellent reliability. Great sound quality is possible through the sMS-100, but may be dependent on one's DAC, USB audio interface, or even the relatively inexpensive SOtM mBPS-d2s Intelligent Battery Power Supply ($399). Computer audiophiles interested in the new Auralic Aries ($1000-$1600) should consider the already-available SOtM sMS-100 Mini Server at less than half the price. Based on its great performance for a relatively small price and the fact that this product fills a huge hole in our wonderful hobby, the SOtM sMS-100 Mini Server is CASH Listed.

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    1-Pixel.png

     

     

     

    Product Information:

     

     

     

    • Product - SOtM sMS-100 Mini Server
    • Price - $449, (optional SOtM mBPS-d2s Intelligent Battery Power Supply - $399)
    • Product Page - Link
    • User Manual - Link (PDF)

     

     

     

    1-Pixel.png

     

     

    Where To Buy

     

    sd-234.png

     

     

     

     

    1-Pixel.png

     

     

    Associated Music:

     

     

     

     

     

     

     

    1-Pixel.png

     

     

     

    Associated Equipment:

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    1-Pixel.png




    User Feedback

    Recommended Comments



    LOL.. I am extremely tempted to get one of these little SOTM boxes to play with.. extremely tempted... the penny has dropped..

     

    Can you share your knowledge and take a look at my Q/ on the HQPlayer NAA thread?

     

    That would be awesome :)

    Share this comment


    Link to comment
    Share on other sites

    Wonderful! I'm a total novice on this streaming stuff, so won't be of much help. But both of your questions on this thread,

     

    HQPlayer's NAA

     

    " There have been some clear developments in recent months..

     

    Fact one. I find one can experiment with HQ Player NAA simply by purchasing the Mini Server from SOTM (see recent CA review)

    Fact two. Miska has an "embedded" HQPlayer that will play files from an UPnP server like MinimServer..

    Fact tree. You can get this embedded HQplayer running on something like a Cubox-i? Or a Raspberry pi?? Correct.>?.this bit I'm a bit unsure off...

     

    Does this mean there is now an easy way of streaming *all* files (outputted as DSD) from HQplayer to the Simple little SOTM Mini Server and then into DSD DAC's like my E28 and Res. Invicta as pure DSD the whole way?.. "

     

    ...appear to have the answer "yes" as I see it. As soon as I get HQPlayer running I'll report.

    Share this comment


    Link to comment
    Share on other sites

    Hi Chris,

     

    Is there a 5th reason for "Why the Need"...better audio quality due to lower electrical noise?

     

    Although based on your findings it looks like the USB output of the SMS-100 is not optimal and actually noisy.

     

    By the way, the Berkeley uses the 5V of the USB and is benefited by sticking an IFI iUSB (preferably with LPSU) in front. Something to try...

     

    Artfully dodged in a few threads, but I will ask anyway. From a purely audio / low noise floor / low fatigue perspective, do you prefer your CAPS through the Alpha SPDIF converter to your DAC, or with the renderer in between?

     

    Cheers

    Share this comment


    Link to comment
    Share on other sites

    Is this thing completely silent with NO fan? It's just there is that open grill structure in the front of the thing....

    Share this comment


    Link to comment
    Share on other sites

    And last but not least.. what's the firmware upgrade path/plan for this little box? Download from the net? Edit. Checked the manual.. yep that's it. Cool :)

    Share this comment


    Link to comment
    Share on other sites

    Blast Wap, you beat me to it. (PS No fans, those are just holes)

    Re updates....I was about to give the *correct* answer:

     

    Command line! BWAHAHAHAHAHA.......

    Share this comment


    Link to comment
    Share on other sites

    ^ LOL Sam.. rock that baby man.. rock the SOAB.. hahahaha I sooo much can't wait to find out how you get on!!!!

    Share this comment


    Link to comment
    Share on other sites

    Chris,

    did you try sMS-100 with USB port of your Devialet?

    If the quality would be OK it would solve the problem of the missing UPnP access of Devialet!

    Share this comment


    Link to comment
    Share on other sites

    So I guess the big questions is, with an Ayre QB-9DSD, does the SOtM sound as good as the Aurender?

    Share this comment


    Link to comment
    Share on other sites

    A cheaper alternative to the SOtM battery supply is a laptop power bank, I've been using a 23000mah one for the last couple of days and it works nicely. Mine has selectable DC output voltage (9, 12, 16 and 19V, I use 9V with the mini server) and the battery seems to last forever.

    Before I was using a linear PSU, connected to a balanced transformer: I know it seems crazy (I don't understand myself why) but the battery powered mini server sounds different, very relaxed and even a bit distant, less exciting, but ears get used to the new sound soon and when I swtiched back to the linear PSU everything was 'in your face' and harsh.

    Share this comment


    Link to comment
    Share on other sites

    ...and when I swtiched back to the linear PSU everything was 'in your face' and harsh.

     

    You need a better LPS then.

    Share this comment


    Link to comment
    Share on other sites

    It could be, but a battery is cheaper :-)

    Share this comment


    Link to comment
    Share on other sites

    Folks, should we move the discussion over here?

     

    miniserver-sms-100-announced

     

    I think more people will see our posts this way, they show up more readily than review responses. So I'm gonna mosey over there--finally got the beast running with first-time for JRMC and an Oppo 105D too, plus I cleaned the fridge (no) but an effing long day!

    Share this comment


    Link to comment
    Share on other sites

    Thanks for the review. I would love to see the technical details follow up.

     

    I.e. no graphics chip, limited hardware mobo, SoTM usb card, small power fluctuations, minimal background processes, option for external LPSU, etc.?

     

    Could this be the audio server answer in a 2 server (control and audio output) setup? Can the control server be either Mac or Win based?

     

    Cheers

     

    This is a very simple motherboard with a low profile Linux operating system running on it. The APP Selector switches between the output modes so only the APP you want runs at any given time. You can control it from a Mac, PC or mobile device. You can have more than one unit on the network. I would just rename each output different. For example DLNA1, DLNA2 and so on.

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    I'm beginning to wonder if replacing one computer with another one makes any difference?

     

    The intent here is not to replace your computer, but rather to free it up. These are meant to work in combination with your existing computer. Also, the SotM mini server is preconfigured so there is nothing messy for you to deal with....

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    What a superb review Chris. The time taken and detail show you really "get this" streaming stuff!!!

     

    And so does Sonore. Clearly. Because they have had this, and the Rendu out there for months...if not years..

     

    Chris I have a couple of Q's..

     

    1/ You said you couldn't stop this product from working (power disconnects etc) Can you see say 4 of these all networked and joined together fully functional in a multiroom setup (like say Sonos)

     

    2/ Do you think the Mini Server will work with *every* USB connection/DAC come what may (or does it have driver compatibility issues rumoured to be in the Aires)

     

    3/ Why do you think Sonore doesn't release a version with SPDIF out to compete with the Aires? Or could this be coming as well?

     

    Cheers

     

    Wap

     

    The multiroom question is possible, but beyond the scope of this review. The SOtM mini server is compatible with UAC 2.0 compliant devices in addition to Chord, Mytek, and M2Tech hiFace versions 1 and 2 out of the box. SOtM makes a very nice matching USB to SPDIF/AES-EBU/Optical converter and no need to add it here.

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    Hi,

     

    You wrote : " In addition to receiving the sMS-100 I received the SOtM mBPS-d2s battery supply... The sound quality was quite a bit better...This was a very positive improvement. But, sound quality wasn't as good as it would get with the sMS-100."

     

    Sorry but I don't get it well, last sentence especially, could you please clarify if SQ was better with or without the battery power supply ?

     

    Thanks,

     

    j

     

    This is going to depend on your USB device. Some devices will need the power supply upgrade option and some will not. You can email be about your device and I can help you decide if a upgrade power supply would improve things for you.

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    Out of curiousity Chris, did you try the sMS 100 with two USB DACs attached? If so, can you pick one, or does it automatically switch or something?

     

    Does anyone know if you can hack(DIY) i2s out of this? I'd buy one in a heartbeat if so... Are there any photos of the interior?

     

    The software on this unit is setup for one output at a time. I can unofficially change the configuration file, but I prefer that we leave it as is. I know what your trying to do with i2s, but let's just say no for now.

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    That's a good point, this focuses on the level of computing/processing that needs to get the job done. Is a small renderer better than a full computer, not necessarily. Let's put aside more processing = more noise for now.

     

    The sMS-100's sound quality is as good as the power supply that feeds it, so there is a limitation that requires work and thought. The battery supply is one solution, independent PSU could/would make a lot of difference as well. As to how much, it's subjective, but if you do have a good PSU (JS-2, Pardo, Hynes), then its use would be mandatory with the sMS-100 or similar.

     

    Inside the sMS-100 is a computer, obviously scaled down from your regular Mac Mini/CAPS designs, but the computer as a music server is, still, inherent in its design, uses less connections and more importantly less reliance on external power supplies to get to the DAC where quality is critical, that is out of the USB port. In a typical scenario using an Ethernet Renderer:

     

    NAS + PSU (Maybe int or ext) -> Switch/Router -> Ethernet -> Renderer + Ext. PSU -> USB A to USB B Cable -> DAC (Add a computer to manage the files anyway)

     

    Compared with

     

    DAS + Ext. PSU -> USB/FW/TB cable -> Computer -> USB A to USB B Cable -> DAC or

    NAS + PSU (Maybe int or ext) -> Switch/Router -> Ethernet -> Computer -> USB A to USB B Cable -> DAC

     

    The big IF is that the DAC you use couldn't care less about noise from the source, since it takes corrective action internally, then the choice of using a renderer is dependent on the install (long cabling). If the DAC doesn't, in fact uses the 5V from the computer, then it would be wise to use the least amount of devices in front of the DAC as possible.

     

    All these PSUs in the chain, complicate AC ground loops and stray noise conductive paths, less of them and the wall warts, the better.

     

    I must be in the camp where I can't see the use of a renderer, where a 'classic' Computer/USB/DAC works consistently and with repeatable SQ expectations.

     

    I'll add this...when I was making music servers even our best unit sounded better with a better power supply. The same is to be expected here.

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    Yes, and low activity on the processor module and lack of storage interface interference are in the plus column for a small "renderer."

    Such a device is also an opportunity to develop a high-quality, isolated USB output to feed the DAC with. Though I have no knowledge of the extent to which SOtM focused on that, given their popular PCIe USB card I doubt they overlooked it.

     

    I'm not a big fan of DLNA, LMS, etc. (though I respect those who are). But I would be very interested in trying the sMS-100 as an NAA for Miska's (Signalyst) HQPlayer.

     

    The NAA output is very cool and Jussi put a lot of effort into it...well worth the try!

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    Hi Chris,

     

    Is there a 5th reason for "Why the Need"...better audio quality due to lower electrical noise?

     

    Although based on your findings it looks like the USB output of the SMS-100 is not optimal and actually noisy.

     

    By the way, the Berkeley uses the 5V of the USB and is benefited by sticking an IFI iUSB (preferably with LPSU) in front. Something to try...

     

    Artfully dodged in a few threads, but I will ask anyway. From a purely audio / low noise floor / low fatigue perspective, do you prefer your CAPS through the Alpha SPDIF converter to your DAC, or with the renderer in between?

     

    Cheers

     

    The most popular CAPS units have hard drive power filters, improved power supply option and the SOtM USB card. This adds significant cost to those builds. SOtM mini server does not have a spinning drive so a hard drive power filter is not needed. You have the option to upgrade the power supply, but the intent is not to make you pay for it...if you do not need or want one. This SOtM 100 series doesn't have the SOtM USB card, but the SOtM 1000 series does along with other considerations.

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    Chris,

    did you try sMS-100 with USB port of your Devialet?

    If the quality would be OK it would solve the problem of the missing UPnP access of Devialet!

     

    Contact me about this and I'll help you out offline...

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    A cheaper alternative to the SOtM battery supply is a laptop power bank, I've been using a 23000mah one for the last couple of days and it works nicely. Mine has selectable DC output voltage (9, 12, 16 and 19V, I use 9V with the mini server) and the battery seems to last forever.

    Before I was using a linear PSU, connected to a balanced transformer: I know it seems crazy (I don't understand myself why) but the battery powered mini server sounds different, very relaxed and even a bit distant, less exciting, but ears get used to the new sound soon and when I swtiched back to the linear PSU everything was 'in your face' and harsh.

     

    Nice idea, but make sure everything is within specifications.

     

    Jesus R

    Share this comment


    Link to comment
    Share on other sites

    "The NAA output is very cool and Jussi put a lot of effort into it...well worth the try!

     

    Jesus R"

     

    Hi Jesus,

     

    My question is, if I'm running a Linux application on a Zuma server (presumably, because it's Linux, there's a lower draw on the Zuma's resources), into a Berkeley Alpha USB converter, will even the best NAA improve the sound much or at all?

     

    I realize, you can't just pop over with your device and know what my system will sound like, but in concept, what do you think?

     

    And if the question has too many variables to offer a reasonable answer, I certainly understand.

     

    Thanks,

     

    Joel

    Share this comment


    Link to comment
    Share on other sites




    Guest
    This is now closed for further comments




×
×
  • Create New...