JPLAY for iOS Is Now Available

43 minutes ago, PavelDosko said:

often get the message "Renderer in transition" and I can't move on

Can you post a screenshot of that message? … and the renderer settings 

Hello, I will send in the evening, now I am at work

Regards

5 hours ago, PavelDosko said:

Last week I bought a Lumin U2 streamer (NOT mini). The Lumin application did not interest me after my experience with the JPLAY iOS app, it is confusing, it is a pain to create local playlists, there is no Qobuz information about the artist and the album, it takes a long time to load albums, etc., etc. That is why I tried the JPLAY iOS app, which I have purchased - everything is OK, but I often get the message "Renderer in transition" and I can't move on ... what about it?

Please check in the Lumin app that you have UPnP/DLNA mode enabled

6 hours ago, PavelDosko said:

Last week I bought a Lumin U2 streamer (NOT mini). The Lumin application did not interest me after my experience with the JPLAY iOS app, it is confusing, it is a pain to create local playlists, there is no Qobuz information about the artist and the album, it takes a long time to load albums, etc., etc. That is why I tried the JPLAY iOS app, which I have purchased - everything is OK, but I often get the message "Renderer in transition" and I can't move on ... what about it?

I have the Lumin U1 and get this same error quite often. I have to remove all songs from the playlist in JPLAY to continue. Also when my Playlist is finished JPLAY will randomly play 1 song from my local library. ??

1 hour ago, al210 said:

I have the Lumin U1 and get this same error quite often. I have to remove all songs from the playlist in JPLAY to continue. Also when my Playlist is finished JPLAY will randomly play 1 song from my local library. ??

Be sure you don’t have any other upnp app active in background …

So  ...  UPNP on Lumin app is ON, no other UPNP application than JPLAY is not active -

Thank you for some advise

25 minutes ago, PavelDosko said:

So  ...  UPNP on Lumin app is ON, no other UPNP application than JPLAY is not active -

 

Thank you for some advise

 

What if you check “Safe transition mode”?

... result -

2 hours ago, PavelDosko said:

... result -

 

Better to ask @Marcin_gps and/or @wklie

10 hours ago, PavelDosko said:

So  ...  UPNP on Lumin app is ON, no other UPNP application than JPLAY is not active

In Lumin app, make sure Re-sampling setting is OFF.  In case you're using a very old or unusual DAC that does not support 192kHz, let me know what it is.

Make sure your setup works with Lumin app first.

Kill JPlay app, and relaunch it.

Hello,
- my setup works with the Lumin app without any problems
- the cause of problems with JPLAY was oversampling enabled in the Lumin app

Hopefully in time I will get used to the Lumin app and have the option of resampling, web radio and Leedh processing

So far, I am missing Qobuz information about the album and artist in the Lumin app, complicated adding one song to the playlist, slower responses, lack of clarity on the page on the iPad, recently played list, monthly lists of albums played, etc.

My setup SFP - Lumin U2 - DAC Rockna Wavedream XLR - passive preamp Big Hattor - amp Simaudio Moon W8.

Thanks everyone for the advice

I hope someone can help me.

I'm trying to get Jplay to work as my control point using Minimserver and HQ player embedded on my Sonictransporter i9.

Minimserver is fine and my library is in Jplay app.  I installed HQplayer embedded on the Sonictransporter. HQplayer embedded sees my Optical Rendu/Holo may DAC endpoint on the backend. I changed no other settings.

I have SonicTransporter:SignalystHQPlayer4 selected in JPlay as my renderer but get an "error sending action to renderer"  on Jplay when I try to play a track.

44 minutes ago, al210 said:

have SonicTransporter:SignalystHQPlayer4 selected in JPlay as my renderer but get an "error sending action to renderer"  on Jplay when I try to play a track.

Try to swipe off JPlay and restart it

8 minutes ago, stefano_mbp said:

Try to swipe off JPlay and restart it

I restarted my Sonictransporter so I'm within the 30 minute limit of HQ player trial.

I swiped off the Jplay as suggested and restarted it but get the same error. I even restarted my iPad but still get same error.

7 minutes ago, al210 said:

I restarted my Sonictransporter so I'm within the 30 minute limit of HQ player trial.

I swiped off the Jplay as suggested and restarted it but get the same error. I even restarted my iPad but still get same error.

Check if your settings are like the screenshot 

2 minutes ago, stefano_mbp said:

Check if your settings are like the screenshot 

Yes they are but I got it working. I deleted the Jplay app and data and reinstalled from scratch. Now working.

Just now, al210 said:

Yes they are but I got it working. I deleted the Jplay app and data and reinstalled from scratch. Now working.

👍

On 7/31/2023 at 2:41 AM, al210 said:

I hope someone can help me.

I'm trying to get Jplay to work as my control point using Minimserver and HQ player embedded on my Sonictransporter i9.

 

Minimserver is fine and my library is in Jplay app.  I installed HQplayer embedded on the Sonictransporter. HQplayer embedded sees my Optical Rendu/Holo may DAC endpoint on the backend. I changed no other settings.

 

I have SonicTransporter:SignalystHQPlayer4 selected in JPlay as my renderer but get an "error sending action to renderer"  on Jplay when I try to play a track.

JPlay IOS can not stream Tidal to HQPlayer Embedded by upnp (with red alarm: error sending action to renderer).  JPlay IOS can only stream Qobuz to HQPlayer Embedded by upnp.  BTW, Mconnect can stream both to HQPlayer Embedded.

16 hours ago, clark8888 said:

JPlay IOS can not stream Tidal to HQPlayer Embedded by upnp (with red alarm: error sending action to renderer).  JPlay IOS can only stream Qobuz to HQPlayer Embedded by upnp.  BTW, Mconnect can stream both to HQPlayer Embedded.

modify: JPlay IOS can not stream Tidal to HQPlayer Embedded 4 by upnp (with red alarm: error sending action to renderer).  JPlay IOS can stream Tidal and Qobuz to HQPlayer Embedded 5 by upnp.  BTW, Mconnect can stream both to HQPlayer Embedded 4 and 5.

I am intending to switch from Roon to Jplay but would need a convolution filter. How can this be done?

1 minute ago, Markus8 said:

I am intending to switch from Roon to Jplay but would need a convolution filter. How can this be done?

Currently there are zero good options. I wish MinimServer could integrate a convolution engine. 

@Marcin_gps Do you think about an integration possibility ?

33 minutes ago, The Computer Audiophile said:

wish MinimServer could integrate a convolution engine. 

It already does, MinimStreamer is needed … I don’t use it and it is a bit  … cryptic but you can ask Simon on his Minimserver forum

3 minutes ago, stefano_mbp said:

It already does … I don’t use it and it is a bit  … cryptic but you can ask Simon on his Minimserver forum

In general good news, though „cryptic“ doesn’t sound that inviting 😅

Good luck. I’ve done it and don’t wish it upon anyone.