Jump to content
IGNORED

EtherREGEN: The long development thread. [Some Gen2 dev. pics and update starting on page 92.]


Recommended Posts

1 hour ago, rickca said:

I suggested he should try mounting it at the bow rather than the stern to see if it worked better that way🙄

 

Sometimes you just have look at nature too know what is the best solutions.

Dolphins for instance are power from the stern. 🤓

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
  • Superdad changed the title to EtherREGEN: We are in final beta; About to enter production!

I am ready to attack.🤠 pistoles blazing eagerly waiting for the  9th hour.
 

I give it 10 minutes before it’s sold out.

 

Good luck to everybody but mostly to myself 🙄

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
2 minutes ago, cool_chris said:

Alternatively Beta Testers might say something if you let them to share some of their experience. 


That’s a good idea. 10 beta testers 10 honest reviews, would be nice 👍 

 

 

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
  • 3 weeks later...
56 minutes ago, Iving said:

 

To be clear we are talking about Tubelover2 aka rb2013 - I think there is another "Tubelover" here.

Rob/Bob was a great audiophile pioneer/contributor and is greatly missed.


You mean  Rob for usaudiomart forum?

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
2 hours ago, roman410 said:

Ether REGEN just arrived. Looks beautiful! It is quite chili here, will let heat 

up to room temperature before plugging in😉

 

20191109_115909.jpg


So @roman410 you are the first, now you have the herculean task to listen carefully and write the best unbiased review of your life. There is no pressure but there are approximately hundreds of people awaiting your review. Good luck, may the force be with you soldier. 🖖
 

 

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
6 minutes ago, owldiscourse said:

Which thread is this?


UpTone Audio EtherREGEN Listening Impressions

 

 

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
2 hours ago, jos said:

Yep, there are a lot audiophiles in the Netherlands. I ordered mine by Audiostore and I assume a few other Dutch guys too, so the amounts is  even higher.


When did you order your ER from the Audiostore?

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
3 minutes ago, jos said:

Oh, Some time ago as a priority customer; I will receive my ER Tomorrow 😀

Happy listening Jos. I think that will not be a problem reading all those happy customers reviews. 

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment
  • 2 weeks later...
3 hours ago, Superdad said:

Now I admit that the screws can be somewhat tight as we use a cordless driver to insert them (can you imagine the time and the wrist damage if my assistant hand inserted every screw? :o)


Isn’t there a torque setting on the cordless screwdriver?

Meitner ma1 v2 dac,  Sovereign preamp and power amp,

DIY speakers, scan speak illuminator.

Raal Requisite VM-1a -> SR-1a with Accurate Sound convolution.

Under development:

NUC7i7dnbe, Euphony Stylus, Qobuz.

Modded Buffalo-fiber-EtherRegen, DC3- Isoregen, Lush^2

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...