jtwrace Posted September 4, 2017 Author Share Posted September 4, 2017 27 minutes ago, jtwrace said: Wait a second. I'm booted into the system with a keyboard now. Do I need do something else? If so, what? OK, I got it working now. The directions I have don't say anything about installing the software once you flash the card so I thought it was all done and ready to go. DSD256 works but with a terrible tone in the background but I'm sure this will be solved in the coming release. In the meantime I have USBridge working. Finally. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 5, 2017 Author Share Posted September 5, 2017 10 hours ago, allo.com said: Yeap I heard that tone...not musical at all. Tomorrow our testing team is back online and will start debugging . Great! Look forward to the new release! W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 7, 2017 Author Share Posted September 7, 2017 44 minutes ago, Mike Pinkerton said: Have you figured out the dropping off the network issue? Do you still have the issue with v154? W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 9, 2017 Author Share Posted September 9, 2017 An update to all. I have to thank @allo.com and Dan (too bad he's not here) from DietPi. They worked tirelessly to solve my issue with upsampling to DSD256 with the Brooklyn. The issue (attached vid) is that I have tone while upsampling but music is playing. Ever hear of this? In the end, Mytek needs to step up and help but I'm not feeling warm and fuzzy about that at the moment. This will certainly say a lot about my future with this dac as customer service is very important to me. My USBridge is playing DSD128 files without any issue though and is powered currently using the Hynes SR3-5 and the included wall wart with "J28" removed. It really does sound great! I should also mention that with trouble shooting I'm currently using the Ethernet to USB adapter as well. DSD256 Tone.MOV W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 10, 2017 Author Share Posted September 10, 2017 6 hours ago, vortecjr said: I have not heard of this. I'm using a microRendu running Sonicorbiter 2.5 into my Mytek Brooklyn. I replicated your setup and it plays fine here. Is the Allo a RoonReady endpoint or a RoonBridge endpoint? If you are not sure you can look in Roon / Audio Setup / Networked. I don't know and don't see see it based on your location. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
Popular Post jtwrace Posted September 15, 2017 Author Popular Post Share Posted September 15, 2017 @allo.com continues to impress the heck out of me. This team (Dan from DIetPi included) has released countless images to deal with my issue in the last couple of weeks. Their willingness and speed is something that every company could learn from. They actually care! I really look forward to seeing what they do in the future with this product and beyond! jventer, Daniel Knight and k-man 2 1 W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 16, 2017 Author Share Posted September 16, 2017 1 minute ago, Kelly said: did they resolve the issue you had to your satisfaction? Can you make any comparisons to other players? If it was up to them it'd be fixed. Sadly, @Mytek_Support @mytek is very slow in responding to help @allo.com with assistance. In the meantime, DSD128 subjectively sounds delightful. I'll go back and try the sMS at some point in the next week or so. I have a lot of travel this coming week so I won't be able to do much. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 16, 2017 Author Share Posted September 16, 2017 Just now, davide256 said: Doesn't the work done so far say this problem is Allo's issue (unique to Allo)? Doesn't exist with the mRendu or other streamers? It's a code issue (DietPi) and they're asking Mytek for help in figuring out what the issue is. Certainly not an unusual request as this happens frequently. The difference is that Mytek is beyond slow with help. As a customer, not good! W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 16, 2017 Author Share Posted September 16, 2017 1 minute ago, davide256 said: Numbers speak when it comes to getting support resource. You can bet if this were an Apple device conflict they would be all over it, even if they knew it was Apples problem to fix. Conversely if you are the only user reporting a problem, its going to be hard to get support from any vendor. Any other Allo users reporting same issue? No idea but I promise you I won't keep my Brooklyn. I'm all about customer service...if this is an issue for them it speaks volumes down the road. I'll gladly tap out. It's totally up to them IMO. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 20, 2017 Author Share Posted September 20, 2017 10 hours ago, allo.com said: https://drive.google.com/uc?id=0B7nTqeZwMML1U0o2WGRGdF81RUU&&export=download Auto update will be available latter today Does this mean that I'll have to update to this version or that my current version will auto update to this as I'm away at the moment? W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 22, 2017 Author Share Posted September 22, 2017 3 hours ago, allo.com said: v156 released, users can update with: dietpi-update https://github.com/Fourdee/DietPi/blob/master/CHANGELOG.txt#L13 So we burn the new image and then it's auto from there? EDIT: I clicked on the link and it's just a change log. No directions or anything @allo.com please advise. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted September 23, 2017 Author Share Posted September 23, 2017 1 hour ago, allo.com said: I have asked the team to make step by step instructions. However better to wait for the GUI version that is coming very soon. I literally started it up and plugged my TV into it. It said there was an update available, logged in and typed "dietpi-update" and it did the rest and did a reboot. Done. Look forward to the GUI though! W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted October 1, 2017 Author Share Posted October 1, 2017 On 9/30/2017 at 9:23 AM, Daniel Knight said: Hi, Many thanks for the feedback. We are currently working on a pre-installed image with @allo.com, this will include: - No SSH/Terminal configuration needed. - Slick web Interface to control/configure the device. - Roon, MPD, O!MPD, ShairPort-Sync, WiFi Hotspot, NAA Daemon, all preinstalled and ready to run. This will bypass the DietPi guide, and the need to configure DietPi completely. Once we've completed testing and ironed a few remaining issues, we'll create a webpage dedicated to informing users of this image, features and how to use it. What is the realistic timeframe? W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted October 2, 2017 Author Share Posted October 2, 2017 11 hours ago, allo.com said: Hi we are in the process of testing the image. Realistically , 1 week to release . I'll wait to see what you come up with but I must say I'm impressed considering it takes some months and months to do. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted October 6, 2017 Author Share Posted October 6, 2017 10 hours ago, allo.com said: Image released . http://dietpi.com/phpbb/viewtopic.php?f=8&t=2317&p=8869#p8868 All existing users, who tried the previous testing images, should re-write the new image to match official release. I'll continue to support the images and web interface, applying updates/fixes through DietPi.Changes since the last images: GENERAL: Auto swapfile size generation on first boot. GENERAL: NetData and Samba file-server now installed by default. Samba can be used to easily transfer music to MPD/O!MPD directory. MPD SETTINGS PAGE: Added ability to set "Native" output frequency and bit depth. Source format will match output format. STATUS PAGE: Added ability to launch the NetData web interface. @allo.com @Daniel Knight You guys are very impressive! The GUI works like a champ! I can't remember when I mentioned that this was needed but it can't be that much longer than a month ago. Daniel Knight 1 W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted October 20, 2017 Author Share Posted October 20, 2017 @Daniel Knight @allo.com My unit updated flawlessly and the GUI is looking GREAT! Keep up the awesome work! Daniel Knight 1 W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 2, 2018 Author Share Posted February 2, 2018 I'm able to update and reboot but it still shows the old version. It will not actually update even though it says it has. Ideas? W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 4, 2018 Author Share Posted February 4, 2018 Where is the latest download I need to install on the emm? W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 4, 2018 Author Share Posted February 4, 2018 I downloaded v6.1 and the GUI doesn't work anymore, is this correct? Can't login with my static IP but it shows up in Roon. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 4, 2018 Author Share Posted February 4, 2018 10 minutes ago, Daniel Knight said: Web interface passed local testing. Can you confirm: - SBC device used - IP address of the system - URL used to access web interface (should be http://IP) Sparky SBC 10.0.1.104 Yes, in the past I just enter the above and it works but it's not now after the update. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 4, 2018 Author Share Posted February 4, 2018 11 minutes ago, jtwrace said: Sparky SBC 10.0.1.104 Yes, in the past I just enter the above and it works but it's not now after the update. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 4, 2018 Author Share Posted February 4, 2018 @Daniel Knight On second thought, is there any software that I need to install other than Roon for web access? W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 5, 2018 Author Share Posted February 5, 2018 19 hours ago, Daniel Knight said: The Allo GUI is only pre-installed with the Allo GUI images: - http://dietpi.com/phpbb/viewtopic.php?f=8&t=2317&p=8869#p8869 Did you use the stock DietPi image (http://dietpi.com/download) or one from the above link? Yet again I'm so confused. Can you post a direct link to the actual download that I need to install? These downloads show 9/2017 and I thought what I need is something recent? W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 6, 2018 Author Share Posted February 6, 2018 1 minute ago, PunkRiot said: I downloaded from this link two days ago, this was 6.1 with Allo GUI. 7z file under this link is updated on regular basis so yo will have the newest Allo GUI image there: Download Image: Sparky SBC: http://dietpi.com/downloads/images/DietPi_SparkySBC-ARMv7-Stretch_AlloGUI.7z THANK YOU! I don't get why it's so hard to have a direct link for these downloads. W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
jtwrace Posted February 7, 2018 Author Share Posted February 7, 2018 On 2/6/2018 at 9:28 AM, PunkRiot said: I downloaded from this link two days ago, this was 6.1 with Allo GUI. 7z file under this link is updated on regular basis so yo will have the newest Allo GUI image there: Download Image: Sparky SBC: http://dietpi.com/downloads/images/DietPi_SparkySBC-ARMv7-Stretch_AlloGUI.7z So what you're saying is the link is updated even though the date of the post is old? It's working now! W10 NUC i7 (Gen 10) > Roon (Audiolense FIR) > Motu UltraLite mk5 > (4) Hypex NCore NC502MP > JBL M2 Master Reference +4 subs Watch my Podcast https://www.youtube.com/channel/UCXMw_bZWBMtRWNJQfTJ38kA/videos Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now