Mike Rubin Posted January 8, 2017 Share Posted January 8, 2017 I periodically run the updater even when there is no indication that a new software version is available, because there sometimes are maintenance releases that don't rise to numbered version levels. I've never had an issue doing this, but I twice have gotten this error message from the current update: Failed to synchronize cache for repo 'sonicorbiterrendu' from 'http://yum.sonicorbiter.com/releases/22/armhfp/rendu/RPMS/': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried, disabling. Is this something about which I should be concerned? Living room: Synology 218+ NAS > NUC 10 i7 > HQP Embedded > xfinity Xfi Router > Netgear GS348 Switch > Sonore Optical Module Deluxe > Sonore Signature Rendu SE Optical Tier 2 > Okto DAC 8 Stereo > Topping Pre90 Preamp > Apollon Audio 1ET400A Mini > Revel F32 Concertas Computer Desk System: Synology DS-218+ NAS > Dell XPS 8930/NUC 10 i7 > HQP Desktop > xfinity Xfi Router > EtherRegen > ultraRendu > Topping D90 DAC > Audioengine A5+'s Link to comment
Mike Rubin Posted January 8, 2017 Share Posted January 8, 2017 Cool. Thank you. Living room: Synology 218+ NAS > NUC 10 i7 > HQP Embedded > xfinity Xfi Router > Netgear GS348 Switch > Sonore Optical Module Deluxe > Sonore Signature Rendu SE Optical Tier 2 > Okto DAC 8 Stereo > Topping Pre90 Preamp > Apollon Audio 1ET400A Mini > Revel F32 Concertas Computer Desk System: Synology DS-218+ NAS > Dell XPS 8930/NUC 10 i7 > HQP Desktop > xfinity Xfi Router > EtherRegen > ultraRendu > Topping D90 DAC > Audioengine A5+'s Link to comment
Mike Rubin Posted December 26, 2018 Share Posted December 26, 2018 Melvin, you probably know this, but the microrendu requires an ethernet connection to your network. When you say it is "connected" to the wifi point, I assume you mean wired rather than wirelessly. Living room: Synology 218+ NAS > NUC 10 i7 > HQP Embedded > xfinity Xfi Router > Netgear GS348 Switch > Sonore Optical Module Deluxe > Sonore Signature Rendu SE Optical Tier 2 > Okto DAC 8 Stereo > Topping Pre90 Preamp > Apollon Audio 1ET400A Mini > Revel F32 Concertas Computer Desk System: Synology DS-218+ NAS > Dell XPS 8930/NUC 10 i7 > HQP Desktop > xfinity Xfi Router > EtherRegen > ultraRendu > Topping D90 DAC > Audioengine A5+'s Link to comment
Mike Rubin Posted April 26, 2019 Share Posted April 26, 2019 Just tested Hifi Cast on a Galaxy S9. Linked with any of several DLNA servers (but not Twonky) that are connected to my Synology NAS, it works fine. (I don't have Twonky or I would have tested with it, too.) Living room: Synology 218+ NAS > NUC 10 i7 > HQP Embedded > xfinity Xfi Router > Netgear GS348 Switch > Sonore Optical Module Deluxe > Sonore Signature Rendu SE Optical Tier 2 > Okto DAC 8 Stereo > Topping Pre90 Preamp > Apollon Audio 1ET400A Mini > Revel F32 Concertas Computer Desk System: Synology DS-218+ NAS > Dell XPS 8930/NUC 10 i7 > HQP Desktop > xfinity Xfi Router > EtherRegen > ultraRendu > Topping D90 DAC > Audioengine A5+'s Link to comment
Mike Rubin Posted May 31, 2019 Share Posted May 31, 2019 4 hours ago, vortecjr said: I understood that your other devices were not working either. My suggestion was likely to Power cycle your USB device. Have you contacted Light Harmonics to find out why their device is sketchy on Linux? FWIW, I also have used a microRendu and Signature Rendu SE with a Geek Pulse without incidents that were related to the Pulse itself. (It was one of three DACs equally affected, though, when the rendus themselves had issues.) That suggests to me that the Pulse plays nicely with Linux. However, the Pulses have been prone to hardware failures and I wonder if that's the case unless @bunno77's Pulse continues to work well in other settings. @bunno77, if you need help from LH, I am sure you know that LH has shut down technical support and customer service. Your best way of trying to obtain relief at this point is to pm @LHCommSquad and see if he can steer you to someone who can help a brother out. It's a longshot but opening a ticket at LH's site is a complete waste of time at this point. Jud 1 Living room: Synology 218+ NAS > NUC 10 i7 > HQP Embedded > xfinity Xfi Router > Netgear GS348 Switch > Sonore Optical Module Deluxe > Sonore Signature Rendu SE Optical Tier 2 > Okto DAC 8 Stereo > Topping Pre90 Preamp > Apollon Audio 1ET400A Mini > Revel F32 Concertas Computer Desk System: Synology DS-218+ NAS > Dell XPS 8930/NUC 10 i7 > HQP Desktop > xfinity Xfi Router > EtherRegen > ultraRendu > Topping D90 DAC > Audioengine A5+'s Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now