stefano_mbp Posted April 26, 2023 Share Posted April 26, 2023 22 minutes ago, FRANCY2007 said: Greetings all, i'm asking for help with a question. What does it mean for Daphile to select "Enable Kernel Mode Setting (KMS) driver" in Settings>General? Best regards. Vincent This is an excerpt of an old change log: New release on July 21st 2014 CHANGES: - DRM/KMS graphics drivers are now disabled by default. The enabling must be confirmed after "Save & Restart" in order to verify that system operates properly. It's recommended that you enable them only if you need them for HDMI audio or they solve some other problem. … it seems it is only needed for hdmi audio, but I have never configured it … Stefano My audio system Link to comment
stefano_mbp Posted July 26, 2023 Share Posted July 26, 2023 @bummer I use Daphile only in client/server setup (Daphile server and three Squeezelite clients (three different rooms) : SOtM sms200/Squeezelite and two rpi4/RoPieeeXL . The most important thing for me is that I can put the server (Intel Nuc10i3/16GB ram) in a separate room to avoid acoustical noise (fans) as I run the C-3PO plugin to upsample to DSD512 . To me Daphile server seems better than LMS as Daphile has some tweaks (in the Power section, like cpu governor and few other) that are not available in LMS and more Daphile is a complete OS/Player so easy to install and manage. In your setup, with the new Aqua/Squeezelite module coming soon I think that you’ll have one of the best (if not the best over all) setup one could desire. So I don’t think you can have a benefit moving to Windows/LMS setup ( … I must say I hate Windows, I left it more than 10 years ago for macos and Linux/Ubuntu and I cannot be happier) Stefano My audio system Link to comment
stefano_mbp Posted July 28, 2023 Share Posted July 28, 2023 25 minutes ago, beetlesonique said: I came here via the Euphony Thread. I was wondering if it would be possible to use Daphile as a Roon Endpoint through Squeezelite? Thanks in advance. best, Martijn Unfortunately I don’t use Roon but theoretically it should work Stefano My audio system Link to comment
stefano_mbp Posted August 16, 2023 Share Posted August 16, 2023 8 minutes ago, bummer said: LinQ Squeezelite really sounds incredible! 👍👍👍 Stefano My audio system Link to comment
stefano_mbp Posted August 22, 2023 Share Posted August 22, 2023 @bummer hi Martin, I suppose you’re using Daphile as the sever and Aqua LinQ as the Squeezelite client. In that scenario it doesn’t make sense to play from ram as the function is intended for a single pc setup, in your one the actual player is Aqua LinQ/Squeezelite. That said I think the issue could be the the file type: using “play from ram” any file type is transcoded to wav type and it can be possible that the configuration of Squeezelite in the Aqua LinQ doesn’t “recognize” that format. Squeezelite should have the -W argument in the command string and you could ask Aqua if there is the possibility to add that argument. Stefano My audio system Link to comment
stefano_mbp Posted August 22, 2023 Share Posted August 22, 2023 @bummer it should be interesting to verify if in Aqua LinQ Squeezelite configuration could be possible to define the dimension of the stream and output buffers too ( it is the -b argument and it is expressed as -b xxxxx:yyyyy where xxxxx is the stream buffer and yyyyy is the output buffer, the measure unit for those buffers is KBites). Defining great enough buffers allow Squeezelite to play from ram most if not all the track/s On my SOtM sms200/Squeezelite I defined 500000 for both stream and output buffer as the sms200 has 2GB of ram, thus 1GB (500000x2) is used for buffers, on the rpi4/RoPieee/Squeezelite 4GB of ram are available and I could define 3GB for the buffers (1500000x2). In both configurations so big buffers allow not only Squeezelite to play the most from ram but to access the network the less possible, this has a quite sensible impact on the performance. Stefano My audio system Link to comment
stefano_mbp Posted August 22, 2023 Share Posted August 22, 2023 4 minutes ago, bummer said: went to the file types settings, set them to default and now it works! That’s a good news … never touch the file settings … 5 minutes ago, bummer said: loading Qobuz to ram - is this possible and if so, how? I don’t use Qobuz (nor Tidal) but I’m quite sure it’s impossible Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 9 hours ago, skipspence said: Hi @stefano_mbp! Can you please share what settings do you use when playing DSD from Daphile to HQP using UPnP/DLNA Bridge in Daphile? To me it seems broken somewhere between HQP and Bridge itself, since I happen only to play max one track in native format... In File types it shows only Transcode DSF to mp3 or Disable though I select No Transcode in Bridge... Looks really frustrating... Thanks in advance if you can help) You need to setup the UPnP/DLNA bridge plugin as follows You must first select the binary and generate the Configuration file set then Streaming options Http mode to no length and add in UPnP Player audio capabilities/Codecs the value dsf . Remember to restart the Bridge every time you change any parameter. . Now go to Player section and select the HQPlayer device, in Audio settings disable the settings as in the screenshot You should now be able to play to HQPlayer embedded dsf files If you have changed something in File types it’s better to reset all settings to default as there is no need to touch them skipspence 1 Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 8 minutes ago, skipspence said: Thanks @stefano_mbp, But no go for me - exactly the same settings as you advise.. Can't understand why File Types shows me only Transcode mp3 with no other options, I reseted to defaults many times... Very strange …. this is my file type section (for dsf/dff types) what if you try to reboot Daphile? … and … which Daphile version are you running? I’m running the last beta 64 bit not RT that you can find here , eventually try it Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 2 minutes ago, skipspence said: Same me... It goes now by every http setting in Bridge native, but only 1 track, then it stops, changing the playing track also stops playback, very strange indeed... try to stop the bridge and to restart it Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 @skipspence is the Daphile plugin installed? No need to configure it … anyway it should be installed by default Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 5 minutes ago, skipspence said: To restart playback I need to reset Bridge by changing http streaming mode, then the same again... I have no idea why you’re facing those issues … can you try to start from scratch reinstalling Daphile? Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 @skipspence maybe this can help … I primarily use HQPlayer embedded (OS version) as a UPnP renderer with Minimserver and a control point app (Lumïn or JPlay for iOS) In order to have a perfect gapless playback in this scenario I defined in HQPe some environment variables that Jussi pointed me to. Start a ssh session then type su root to acquire root rights then type nano /etc/default/hqplayerd and paste these three variables (the first time the file hqplayerd is new and empty) HQPLAYER_RESET_SDM=0 HQPLAYER_STREAM_FREEWHEEL=1 HQPLAYER_BUFFER_TIME=20000 then save and exit with ctrl-x/y/enter reboot HQPlayer embedded Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 Just now, skipspence said: Can I I make it from HQPe console instead , shh means distant computer? Of course you can make it from console, in that case you can avoid the “su root” command as you’re already logged al root. Yes, ssh means a remote terminal session Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 4 minutes ago, skipspence said: Or how can I start shh session from W10, don't need Putty or do I? Yes, you need Putty from Windows. By default ssh is disabled in HQPe, to enable it you need to login from console and create a user of your choice with the command useradd new-user then you need to set a password for that new-user with the command passwd new-user then type the password, hit enter and retype the password and hit enter again. From now on you’ll be able to start e remote terminal session (ssh) from any pc using Putty on Windows or terminal on macOS Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 6 minutes ago, skipspence said: Then I need to put every string separately after Enter, right? It should appear like this Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 2 minutes ago, skipspence said: Generally the problem looks now like I need to restart Bridge every time to resume the playback for each track only.. Could it be related with the computer you’re using? What pc are you running Daphile on? Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 5 minutes ago, skipspence said: pretty old Yes, definetly … but it should work … I should try to reinstall Daphile from scratch …. Stefano My audio system Link to comment
stefano_mbp Posted August 23, 2023 Share Posted August 23, 2023 @skipspence I have installed UPnP/DLNA Bridge only. UPnP Media server interface isn’t needed at all and it works in the opposite way: it let see Daphile as a UPnP renderer and Daphile library as a UPnP mediaserver. It is possible the two both installed generate some conflict. If you have both installed remove both and install the Bridge only Stefano My audio system Link to comment
stefano_mbp Posted August 27, 2023 Share Posted August 27, 2023 29 minutes ago, skipspence said: Yes, I did it finally and now it works Thanks again for your time and your help! 👍 skipspence 1 Stefano My audio system Link to comment
stefano_mbp Posted September 26, 2023 Share Posted September 26, 2023 12 hours ago, Anwar said: Unfortunately, due to limitations of tablets (both Android and IOS), you need to specify the IP address from tablet's browser to control LMS It depends on you network and primarily on the router that probably doesn’t have a good working dns. Here, on iPad, I can connect without issues using: daphile.local daphile.local:9000/material eunhasu.local:9000 (lms running on sotm sms200) hqplayer.local:8088 Stefano My audio system Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now