Mathieu Posted July 6, 2020 Share Posted July 6, 2020 Hello, here's my problem: First installation after unboxing, preloaded moode audio sd already in the slot, usb dac connected via the clean usb slot, ethernet cable connected from my internet box to the player, usb key with some flac tunes for test on the usb wifi/bt slot, shanti linear power supply plugged and powered on, PWR and ACT lights are on... Then I open google chrome, enter the following adress in the search bar : http://moode No problem for the moment, I go through the first step of the configuration process, audio device setup, select "none" for i2s audio device then SET then reboot of the usbridge player... ...and I never could join the moode adress again, connection failed on chrome, corrupted website on mozilla, I tried htpp://moode htpp://moode.local htpp://172.24.1.1 on both browser nothing Any help possible? Thanks Link to comment
Richard Dale Posted July 6, 2020 Share Posted July 6, 2020 33 minutes ago, Mathieu said: Hello, here's my problem: First installation after unboxing, preloaded moode audio sd already in the slot, usb dac connected via the clean usb slot, ethernet cable connected from my internet box to the player, usb key with some flac tunes for test on the usb wifi/bt slot, shanti linear power supply plugged and powered on, PWR and ACT lights are on... Then I open google chrome, enter the following adress in the search bar : http://moode No problem for the moment, I go through the first step of the configuration process, audio device setup, select "none" for i2s audio device then SET then reboot of the usbridge player... ...and I never could join the moode adress again, connection failed on chrome, corrupted website on mozilla, I tried htpp://moode htpp://moode.local htpp://172.24.1.1 on both browser nothing Any help possible? Thanks You could try using an app like Fing on android or Net Analzer on iOS to find what IP address the Allo is using and type that in the http: URL. System (i): Stack Audio Link > Denafrips Iris 12th/Ares 12th-1; Gyrodec/SME V/Hana SL/EAT E-Glo Petit/Magnum Dynalab FT101A) > PrimaLuna Evo 100 amp > Klipsch RP-600M/REL T5x subs System (ii): Allo USB Signature > Bel Canto uLink+AQVOX psu > Chord Hugo > APPJ EL34 > Tandy LX5/REL Tzero v3 subs System (iii) KEF LS50W/KEF R400b subs System (iv) Technics 1210GR > Leak 230 > Tannoy Cheviot Link to comment
Mathieu Posted July 6, 2020 Author Share Posted July 6, 2020 Thank you for the advice, just tried it, the player don't appear on the connected device list... bummer... Maybe sould i try to flash the sd card again maybe? Link to comment
Richard Dale Posted July 6, 2020 Share Posted July 6, 2020 56 minutes ago, Mathieu said: Thank you for the advice, just tried it, the player don't appear on the connected device list... bummer... Maybe sould i try to flash the sd card again maybe? Yes, I would try that. It is odd that you could access it the first time, but not when it was started again after changing some non-network settings. There is an HDMI port on the Allo - you could try connecting a monitor to that to get some clues as to what is going wrong on startup perhaps. System (i): Stack Audio Link > Denafrips Iris 12th/Ares 12th-1; Gyrodec/SME V/Hana SL/EAT E-Glo Petit/Magnum Dynalab FT101A) > PrimaLuna Evo 100 amp > Klipsch RP-600M/REL T5x subs System (ii): Allo USB Signature > Bel Canto uLink+AQVOX psu > Chord Hugo > APPJ EL34 > Tandy LX5/REL Tzero v3 subs System (iii) KEF LS50W/KEF R400b subs System (iv) Technics 1210GR > Leak 230 > Tannoy Cheviot Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now