Riccardo r Posted December 15, 2023 Share Posted December 15, 2023 1 hour ago, stefano_mbp said: @Riccardo r … the chain should be: LMS (upnp bridge) -> HQPlayer embedded -> HQPlayer NAA -> dac HQPlayer cannot see any upnp device, it can’t as to communicate with NAA it use its own protocol, therefore it seems you’re looking for an impossible setup This Is the chain but of you see the attachment the player was in backend Link to comment
Riccardo r Posted December 15, 2023 Share Posted December 15, 2023 59 minutes ago, stefano_mbp said: @Riccardo r . your second screenshot is not so clear, the network backend field is missing … Indeed this Is the problem. A bug? Allo usbridge Sparky Is no more supported by Filippo ( gentooplayer ) but It is'nt the problem. Link to comment
Riccardo r Posted December 15, 2023 Share Posted December 15, 2023 13 minutes ago, stefano_mbp said: Unfortunately I don’t know anything about Sparky … are you sure that NAA is actually running on it? Absolutely yes!!!! No One problem from Sparky!! Between the two screenshots of hqplayerd's configuration the only difference is the UpNpbridge version . In the old photo dev-2 in the recent photo dev-3 Link to comment
Riccardo r Posted December 16, 2023 Share Posted December 16, 2023 22 hours ago, stefano_mbp said: @Riccardo r … anyway I don’t think the upnp bridge can be the root of the issue, you should be able the have HQPlayer and HQPlayer NAA working fine, then you can go further checking the integration of LMS in the chain Summary. It has been several years that my LMS Upnpbridge hqplayerd system has been working perfectly but having been created from scratch over time several issues have arisen. Even now it works spectacularly , with the Lms material skin. Only marginal problem is this lack of the player in the configuration page of hqplayerd . It would be helpful to figure out where to look for the reason for this, even though the system sounds perfectly Link to comment
Riccardo r Posted December 16, 2023 Share Posted December 16, 2023 1 hour ago, Miska said: I just don't understand what the issue is about... Hi. The problem is this lack of the player in the configuration page of hqplayerd in "device " - "network audio backend" ( Red circles screenshoot). It would be helpful to figure out where to look for the reason for this, even though the system sounds perfectly Link to comment
Riccardo r Posted December 17, 2023 Share Posted December 17, 2023 26 minutes ago, Miska said: Ahh, you mean NAA doesn't appear on the list. Maybe it wasn't reachable when you booted up your Embedded instance. Did you try with the "Refresh devices" button? Dear Miska Thank you. After the sixth restart of LMs server for updates in three days the problem seems to be solved. How, is a mystery. In any case in the past few days I have killed and restarted both Lms and Embedded without result. Since it is ok now if it happens again I will do as you say. Link to comment
Riccardo r Posted December 22, 2023 Share Posted December 22, 2023 After an update of LMS server (updating Upnpbridge ) non sound plays again. emebeded log.pdf Link to comment
Riccardo r Posted December 22, 2023 Share Posted December 22, 2023 1 hour ago, stefano_mbp said: Which version number? Last One Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 I think the problem is about the upnp interface of hqplayerd . If I don't find the stable solution in hqplayerd , The thing I should learn is where to look for Philippe's UpNpbridge plugin update history and install the one that works properly with hqplayerd Philippe , about this problem said: I took the time to download hqplayer embedded in a x64 VM. With transcode to flac, it works. Feels to me like there is something with the HQPlayer configuration and the rendering device because if it streams normally but you don't hear anything, it just means it's outputting sound to a different destination, Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 Hqplayerd parameters? Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 Ops thanks. No, in plugin Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 this is mine now not modified Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 until yesterday i have not problem , the cpu is a I5 10400 and it works at 35% Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 Stefano please, could you remember me how to install an old plugin and how to erase the one's that is installed now? I'm very sorry for my question but i'm in hurry Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 12 hours ago, Riccardo r said: After an update of LMS server (updating Upnpbridge ) non sound plays again. emebeded log.pdf 61.62 kB · 1 download @Miska hi. Have you some idea about that? No sound at all Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 4 minutes ago, stefano_mbp said: @Riccardo r … just a doubt … are you running a licensed HQP Embedded 5 version or are you in trial? Quite legal. Full licenzed ah ah Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 25 minutes ago, stefano_mbp said: @Riccardo r … just a doubt … are you running a licensed HQP Embedded 5 version or are you in trial? Thanks all problem solved . Backend bad setting Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 35 minutes ago, stefano_mbp said: @Riccardo r that’s a good news! I’ve just downloaded the HQPe 5 version supposing a bug somewhere but every thing is working fine too. Glad you could solve the “issue” I must apologize to everyone and especially to Philippe who had already suggested to look at the settings of hqplayerd Link to comment
Riccardo r Posted December 23, 2023 Share Posted December 23, 2023 36 minutes ago, stefano_mbp said: Just for curiosity … which were the wrong settings? This. Alsa Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now