r_w Posted August 27, 2016 Share Posted August 27, 2016 Absolutely!!! Have you already bought the ATC SCM19 ... may be worth looking at the active version? Source: *Aurender N100 (no internal disk : LAN optically isolated via FMC with *LPS) > DIY 5cm USB link (5v rail removed / ground lift switch - split for *LPS) > Intona Industrial (injected *LPS / internally shielded with copper tape) > DIY 5cm USB link (5v rail removed / ground lift switch) > W4S Recovery (*LPS) > DIY 2cm USB adaptor (5v rail removed / ground lift switch) > *Auralic VEGA (EXACT : balanced) Control: *Jeff Rowland CAPRI S2 (balanced) Playback: 2 x Revel B15a subs (balanced) > ATC SCM 50 ASL (balanced - 80Hz HPF from subs) Misc: *Via Power Inspired AG1500 AC Regenerator LPS: 3 x Swagman Lab Audiophile Signature Edition (W4S, Intona & FMC) Storage: QNAP TS-253Pro 2x 3Tb, 8Gb RAM Cables: DIY heavy gauge solid silver (balanced) Mains: dedicated distribution board with 5 x 2 socket ring mains, all mains cables: Mark Grant Black Series DSP 2.5 Dual Screen Link to comment
r_w Posted August 27, 2016 Share Posted August 27, 2016 +100 I'm currently using the latest passive version of ATC SCM40, but if I live in the US, I would sell those and get this instead ATC SCM20ASL Pro mk2 | Sweetwater.com. What a great price and no need to worry about amp. Sent from my SM-G930F using Computer Audiophile mobile app Source: *Aurender N100 (no internal disk : LAN optically isolated via FMC with *LPS) > DIY 5cm USB link (5v rail removed / ground lift switch - split for *LPS) > Intona Industrial (injected *LPS / internally shielded with copper tape) > DIY 5cm USB link (5v rail removed / ground lift switch) > W4S Recovery (*LPS) > DIY 2cm USB adaptor (5v rail removed / ground lift switch) > *Auralic VEGA (EXACT : balanced) Control: *Jeff Rowland CAPRI S2 (balanced) Playback: 2 x Revel B15a subs (balanced) > ATC SCM 50 ASL (balanced - 80Hz HPF from subs) Misc: *Via Power Inspired AG1500 AC Regenerator LPS: 3 x Swagman Lab Audiophile Signature Edition (W4S, Intona & FMC) Storage: QNAP TS-253Pro 2x 3Tb, 8Gb RAM Cables: DIY heavy gauge solid silver (balanced) Mains: dedicated distribution board with 5 x 2 socket ring mains, all mains cables: Mark Grant Black Series DSP 2.5 Dual Screen Link to comment
r_w Posted August 28, 2016 Share Posted August 28, 2016 Hi Kilroy, Amp matching for 19s (very similar to 20s) is almost certainly best done by selling your 19s and getting Active 20s - then you will have 4 poweramps tuned for each drive unit via an active crossover, for miles less than the price of buying 2 stereo or 4 mono amps and the 19s. It may not have been the advice you were looking for, but it was the best advice anyone could have given you. FTR, I own 4 pairs of active ATCs: 1 x 50 ASL & 3 x 20 ASL Pro. It is from 25 years experience as an ATC owner that I supported alubis's post, it was brilliant advice and an utter bargain, given what you will end up with. ;-) Source: *Aurender N100 (no internal disk : LAN optically isolated via FMC with *LPS) > DIY 5cm USB link (5v rail removed / ground lift switch - split for *LPS) > Intona Industrial (injected *LPS / internally shielded with copper tape) > DIY 5cm USB link (5v rail removed / ground lift switch) > W4S Recovery (*LPS) > DIY 2cm USB adaptor (5v rail removed / ground lift switch) > *Auralic VEGA (EXACT : balanced) Control: *Jeff Rowland CAPRI S2 (balanced) Playback: 2 x Revel B15a subs (balanced) > ATC SCM 50 ASL (balanced - 80Hz HPF from subs) Misc: *Via Power Inspired AG1500 AC Regenerator LPS: 3 x Swagman Lab Audiophile Signature Edition (W4S, Intona & FMC) Storage: QNAP TS-253Pro 2x 3Tb, 8Gb RAM Cables: DIY heavy gauge solid silver (balanced) Mains: dedicated distribution board with 5 x 2 socket ring mains, all mains cables: Mark Grant Black Series DSP 2.5 Dual Screen Link to comment
r_w Posted August 28, 2016 Share Posted August 28, 2016 Since you ask... because that's what you would need to buy, plus an active crossover to have any chance of getting the same perfromance as the active 20s. That's what you would have been getting, no worries, stick with the 19s. Whoever said anything about buying two stereo amps or 4 mono amps? Source: *Aurender N100 (no internal disk : LAN optically isolated via FMC with *LPS) > DIY 5cm USB link (5v rail removed / ground lift switch - split for *LPS) > Intona Industrial (injected *LPS / internally shielded with copper tape) > DIY 5cm USB link (5v rail removed / ground lift switch) > W4S Recovery (*LPS) > DIY 2cm USB adaptor (5v rail removed / ground lift switch) > *Auralic VEGA (EXACT : balanced) Control: *Jeff Rowland CAPRI S2 (balanced) Playback: 2 x Revel B15a subs (balanced) > ATC SCM 50 ASL (balanced - 80Hz HPF from subs) Misc: *Via Power Inspired AG1500 AC Regenerator LPS: 3 x Swagman Lab Audiophile Signature Edition (W4S, Intona & FMC) Storage: QNAP TS-253Pro 2x 3Tb, 8Gb RAM Cables: DIY heavy gauge solid silver (balanced) Mains: dedicated distribution board with 5 x 2 socket ring mains, all mains cables: Mark Grant Black Series DSP 2.5 Dual Screen Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now