TRHH Posted February 5, 2023 Share Posted February 5, 2023 My current setup is based on StarTech single mode: Link to comment
TRHH Posted March 10, 2023 Share Posted March 10, 2023 The way I fixed "the last meter" - in my case 20 cm Ethernet (from FMC to DAC) with 7 X Würth Elektronik Split ferrite for Ø 7.5 mm, black, 246 Ohm @ 100 MHz. Link to comment
TRHH Posted April 5, 2023 Share Posted April 5, 2023 Hi I would like to test FTLF1318P3BTL with my Cisco Meraki Go 8 Port Switch (GS110-8-HW-EU). But the big Q: Will it work? Thanks Torben Link to comment
TRHH Posted April 10, 2023 Share Posted April 10, 2023 Hi I am looking for a single mode Fiber Optic Patch Cable. It has to have: Grade B connectors Bend Insensitive Thanks Torben Link to comment
TRHH Posted April 11, 2023 Share Posted April 11, 2023 10 minutes ago, Bertel said: Can you please share a link / URL to this discussion? Here you go: https://community.roonlabs.com/t/sq-question-single-mode-vs-multimode-fibre-for-lumin-lan-optical-products-x1-p1-and-u2/238922/34 Torben Bertel 1 Link to comment
TRHH Posted August 14, 2023 Share Posted August 14, 2023 2 X Finisar FTLF1318P3BTL arrived today - Until now it works fine with my Cisco Meraki Go 8 Port Switch (GS110-8-HW-EU). Torben Link to comment
TRHH Posted September 3, 2023 Share Posted September 3, 2023 Have also have the Cisco - SFP-10G-AOC2M - Direct-Attach Active Optical Cable https://www.tonitrus.com/de/netzwerk/cisco/zubehoer/aktive-optische-kabel-aoc/10254435-003-cisco-sfp-10g-aoc2m-direct-attach-active-optical-cable-network-cable-sfp-to-sfp-2-m/ Torbern Link to comment
TRHH Posted September 3, 2023 Share Posted September 3, 2023 Make sure the label looks like this: Torben Link to comment
TRHH Posted September 4, 2023 Share Posted September 4, 2023 It seems that Cisco are using man different companies to produce the SFP-10G-AOC: Torben Link to comment
TRHH Posted September 9, 2023 Share Posted September 9, 2023 Due to it's specifications a bit more expensive compared to other fiber patch cords: 1.8 meter - Commscope TeraSPEED OS2 full spectrum, zero water peak single mode (ZWP-SM) LC/UPC to LC/UPC fiber patch cord, 1.6 mm duplex, 9/125µm, ITU-T G.652.D and G.657.A1 compliant (FFWLCLC42-JXF006) Torben Link to comment
TRHH Posted November 28, 2023 Share Posted November 28, 2023 There is a lot of discussions about what SFP to use but almost no information what FMC is used. Currently I am using LevelOne GVT-2000 (FMC) - see below. Would be interesting to hear what other users are using. So, what FMC are you using? Torben Link to comment
TRHH Posted March 27 Share Posted March 27 On 3/11/2024 at 11:32 PM, R1200CL said: There’s a new firmware update for the Mikrotik CSS610-8G-2S+IN switch that many of us have. I need a new switch. Does Finisar FTLF1318P3BTL work with Mikrotik CSS610-8G-2S+IN? THX Torben jabbr 1 Link to comment
TRHH Posted March 28 Share Posted March 28 These are the new switches I am currently looking at: HPE - Aruba Instant On 1930 8G Switch (JL680A#ABB) QNAP - QSW-2104-2S ZyXEL - XGS1010-12 It would be great if anybody knows if they work with FTLF1318P3BTL. Thanks Torben Link to comment
TRHH Posted March 31 Share Posted March 31 THX all :-) As I don't want to replace my FTLF1318P3BTL let me rephrase the question: What 8-10-12 port (LAN) + 2 SFP port switch will work with FTLF1318P3BTL? Thanks Torben Link to comment
TRHH Posted April 23 Share Posted April 23 FTLF1318P3BTL is now End Of Life: Not sure if there is an direct substitute. Torben audiobomber 1 Link to comment
TRHH Posted April 23 Share Posted April 23 32 minutes ago, audiophilac said: dual rate Finisar 1475 This one: FTLX1475D3BCV? Torben Link to comment
TRHH Posted May 3 Share Posted May 3 @jabbr Thanks for sharing your expertise here. As my current switch - Cisco Meraki Go GS110-8-HW-EU - and SFP - Finisar FTLF1318P3BTL - are End-Off-Life, the time has come for an replacement (upgrade). A new switch with dual rate (SFP/SFP+), 8-12 ports, no need for PoE, fanless, and some new SFP/SFP+? THANKS for any suggestions and have a nice WE Torben Link to comment
TRHH Posted May 3 Share Posted May 3 Thanks for you comments. The red ones are the ones that need to be replaced/upgraded: Have a nice WE Torben Link to comment
TRHH Posted May 5 Share Posted May 5 On 5/4/2024 at 2:58 AM, dbastin said: I am curious why you think the switch is end of life? Here you go: https://community.meraki.com/t5/Announcements/Meraki-Go-End-of-Sale-April-2025/ba-p/233755 That is way I am looking for a new switch. Torben Link to comment
TRHH Posted May 5 Share Posted May 5 10 hours ago, dbastin said: Maybe I am missing something ... but just because they wont make Go products any more doesn't mean the existing ones are no good. It seems your switch will serve its purpose until it dies. I know THX - but I am still looking for new switch and SFP/SFP+ Torben Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now