Jump to content
IGNORED

USB cable comparisons


Recommended Posts

  • 2 weeks later...
  • 7 months later...

Two companies in Asia are willing to customize the length and they're asking just a bit more for the regular 10-meter ones.

 

We just have to send them an e-mail and figure out how much international shipping would cost etc.

 

First one is Opti Cloud:

 

http://www.opti-cloud.com/us/contact-us.html

http://item.taobao.com/item.htm?id=38623946535

 

Another one would be Adnaco-SU1 but they're longer carrying that in 2015, actually they're merely the reseller of products that were manufactured by Everpro to begin with:

 

http://www.everprotech.com/Contact/17.aspx

http://www.amazon.cn/s?ie=UTF8&me=A2P6YZ7S98C08&page=1

 

Basically we just get a relatively short cable that's terminated with the same male type "A" connector on both ends. Plug one end to USB 3.0 port on the source (USB 2.0 ones will NOT work at all so let's bear in mind) and then another end will go into the input of this Everpro USB2.0-USB3.0 adaptor:

 

http://www.amazon.cn/Everpro-USB2-0-USB3-0-adaptor-长芯盛-USB2-0转USB3-0适配器/dp/B00K5NADIQ

 

Now we still need to feed that adapter with nice and clean 5V LPS since the sound ain't any good with the included wall wart. The size of its DC barrel is 4.0-mm / 1.7-mm so we'll have to make the right DC cable as well.

 

Finally we just add that type "A" to type "B" coupler between the output of the adapter and input of USB DAC, or an existing USB cable would work as well. Excellent track records so far in Hong Kong since many of us here are loving the positive results:

 

http://www.post76.com/x2/forum.php?mod=viewthread&tid=190707

 


If that were a bit too much work and we'd rather have something similar to that Corning flavor, they're also willing to customize the length for this particular version and their reply was 0.5m as the minimum:

 

http://www.amazon.cn/Everpro-USB3-0-Hybrid-AOC-长芯盛-主动式混合光纤数据线-10米-20米/dp/B00R17ICNW

 

It does cost more @ almost 200 bucks (i.e. 1098 RMB) a pop for 10-m ones and definitely a little bit more than that for shorter ones.

Link to comment

Yes, indeed. Only the ones from Opti Cloud / Adnaco / Everpro are kinda weird since they're ONLY good for sources with USB 3.0 ports. Same deal with Unibrain (way too long as well, LOL) and an extra adapter is required for DAC with USB 2.0 inputs

 

http://www.unibrain.com/products/usb-3-0-active-optical-cables/

 

Corning is all set with USB 2.0 on both ends but sometimes USB hubs are required for some devices.

Link to comment
  • 1 month later...
  • 8 months later...
  • 2 years later...

Plenty of audiophiles in China and Hong Kong tried those USB cables from Intona and the feedback seemed to be unanimously positive so far, one of them actually tried a plethora of high-end USB cables and Intona Ultimate turned out to take the cake

 

https://item.taobao.com/item.htm?id=570753836367

http://www.headphoneclub.com/forum.php?mod=viewthread&tid=718090

http://www.headphoneclub.com/forum.php?mod=viewthread&tid=718546

http://www.hiendy.com/hififorum/forum.php?mod=viewthread&tid=117935

http://www.hiendy.com/hififorum/forum.php?mod=viewthread&tid=121379

 

Maybe signal integrity ain't snake oil after all?

Link to comment
  • 3 weeks later...
  • 2 years later...

 

 

https://trptk.com/studio/

Quote

Furutech is an important partner not only inside, but also outside of the studio bubble, by supplying us with power supplies, cables and accessories.

Thanks to their Daytona 313E power filter and e-TP609E NCF power distributors, the risk of wobbly power grids and its accompanying noise in a recording environment such as a church is close to zero.

Same goes for their cables. Furutech has custom-made a set of microphone cables to the exact specifications of TRPTK, with connectors made out of exotic materials such as rhodium and carbon fiber. It’s safe to say these cables are one of a kind and among the best in the world.

Speaking of cables, the NCF Boosters are some of the most important tools in the TRPTK toolkit. These boosters lift cables off the floor to minimise the risk of electromagnetic interference. This, combined with their revolutionary NCF Technology makes sure we can record at extreme quality levels without being hindered by any surroundings.

 

 

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...