Crown Reference II

[JM Sound]

View Classified

Crown Reference II

---

4 ohm Stereo (per channel) 555W
8 ohm Stereo (per channel) 355W
8 ohm Bridge-Mono 1,100W
16 ohm Bridge-Mono 715W
2 ohm Parallel-Mono 1,115W
4 ohm Parallel-Mono 710W

Frequency Response: ±0.1 dB from 20 Hz to 20 kHz at 1watt.
Phase Response: +5 to –15 degrees from 20 Hz to 20 kHz at 1 watt.
Signal-to-Noise (A-weighted) below rated full bandwidth power: 117 dB.
Total Harmonic Distortion (THD): Less than 0.1% at full bandwidth power.
Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1)
< 0.005% from full bandwidth power to 36 watts rising linearly to 0.025% at 36 milliwatts.
Crosstalk (below rated full bandwidth power): >100 dB from 20 Hz to 400 Hz and >65 dB at 20 kHz.
Damping Factor: >20,000 from 10 Hz to 400 Hz.
Voltage Gain (at the maximum level setting):
69:1 ± 6% or 37 dB ± 0.5 dB at 0.775 volt sensitivity.
38:1 ± 6% or 32 dB ± 0.5 dB at 1.4 volt sensitivity.
20:1 ± 6% at 26 dB gain
Load Impedance: Safe with all types of loads. 4-8 ohms in Stereo mode, 8-16 ohms in Bridge-mono mode, and 2-4 ohms in Parallel- Mono mode.

---

• Seller
  JM Sound
• Date
  05/12/22
• Price
  1,495.00 USD
• Category
  Amplifiers