shang_2000 Posted February 16, 2020 Share Posted February 16, 2020 my allo usbridge signature: 4.14.114 kenel,perfect!can play dsd256 128 64(dop)my dac is rme aid2 fs(4493),daphlie push to suqueezelite r2 Link to comment
shang_2000 Posted February 16, 2020 Share Posted February 16, 2020 kernel to boot select v14min-nogr -100rcu kernel select 4.19.94-210120 Link to comment
shang_2000 Posted February 16, 2020 Share Posted February 16, 2020 I@antonellocaroli MPORTANT: config file '/etc/conf.d/squeezelite' needs updating. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. how? Link to comment
shang_2000 Posted February 16, 2020 Share Posted February 16, 2020 @antonellocaroli Thanks! Link to comment
shang_2000 Posted March 2, 2020 Share Posted March 2, 2020 13 hours ago, antonellocaroli said: I have updated the 4.14 (010320) kernel with AX2_v.2 drivers... before they had the old driver (I'm talking about 4.14 on 4.19 still has drivers v.2) .. can allo usbridge signature use 4.14 or 4.19? Link to comment
shang_2000 Posted March 2, 2020 Share Posted March 2, 2020 22 minutes ago, antonellocaroli said: both. but with some dacs it seems to go better on 4.14...I use both rt and not rt without problems 4.19... thanks! Link to comment
shang_2000 Posted April 25, 2020 Share Posted April 25, 2020 10 hours ago, antonellocaroli said: did you go into the hqplayer setting and set the audio output? http://www.sonore.us/HQPlayer-manual.pdf >>> Verifying ebuild manifests >>> Emerging (1 of 1) media-sound/logitechmediaserver-bin-8.0.0_pre20200410::antonellocaroli >>> Downloading 'http://downloads.slimdevices.com/nightly/8.0/lms/aaa663bb569ff4438e25c7e9a361d79b3716502d//logitechmediaserver-8.0.0-1586578181.tgz' --2020-04-25 14:37:54-- http://downloads.slimdevices.com/nightly/8.0/lms/aaa663bb569ff4438e25c7e9a361d79b3716502d//logitechmediaserver-8.0.0-1586578181.tgz Resolving downloads.slimdevices.com... 99.84.130.120, 99.84.130.81, 99.84.130.22, ... Connecting to downloads.slimdevices.com|99.84.130.120|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2020-04-25 14:37:55 ERROR 404: Not Found. !!! Couldn't download 'logitechmediaserver-8.0.0-1586578181.tgz'. Aborting. * Fetch failed for 'media-sound/logitechmediaserver-bin-8.0.0_pre20200410', Log file: * '/var/tmp/portage/media-sound/logitechmediaserver-bin-8.0.0_pre20200410/temp/build.log' >>> Failed to emerge media-sound/logitechmediaserver-bin-8.0.0_pre20200410, Log file: >>> '/var/tmp/portage/media-sound/logitechmediaserver-bin-8.0.0_pre20200410/temp/build.log' * Messages for package media-sound/logitechmediaserver-bin-8.0.0_pre20200410: * Fetch failed for 'media-sound/logitechmediaserver-bin-8.0.0_pre20200410', Log file: * '/var/tmp/portage/media-sound/logitechmediaserver-bin-8.0.0_pre20200410/temp/build.log' Link to comment
shang_2000 Posted April 25, 2020 Share Posted April 25, 2020 Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | x86_64 Temp | 0'c : 32'f | Who put me in the freezer! Governor | Unknown Current Freq Min Freq Max Freq CPU0 | 0 MHz 0 MHz 0 MHz [ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it. - if the temperature is not displayed, first run the command: sensors-detect --auto cpu?????? Link to comment
shang_2000 Posted April 25, 2020 Share Posted April 25, 2020 28 minutes ago, antonellocaroli said: gp-update and try again which pc? which version of GP are you using? try using shell glaces https://github.com/gentooplayer/gentooplayer.github.io/wiki/Glances amd a10 7800 ,2.13 Link to comment
shang_2000 Posted April 25, 2020 Share Posted April 25, 2020 8 hours ago, antonellocaroli said: yes, forget cpu-info, it's a script that doesn't work on all platforms... use glances How to cancel cpu “Profile” mode and restore default? How to set the time zone? Link to comment
shang_2000 Posted April 26, 2020 Share Posted April 26, 2020 4 minutes ago, antonellocaroli said: Profile6 is standard profile https://wiki.gentoo.org/wiki/Localization/Guide thanks! Link to comment
shang_2000 Posted April 26, 2020 Share Posted April 26, 2020 Load the System in RAM select operation and clic to EXCUTE Ramdisk Reset: use before changing ramdisk mode or after a few updatesCleanup Buffer/Cache: to give when you see the ram too full, check with free -m Ramdisk mode 1: Squeezelite, Squeezelite-R2, Mpd, Networkaudiod, RoonBridge, Hqplayer Embedded, UpMPDcliRamdisk mode 2: Squeezelite, Squeezelite-R2, Mpd, Networkaudiod, RoonBridge, Hqplayer Embedded, LMS, UpMPDcli, BubbleUpnpRamdisk mode 3: Squeezelite, Squeezelite-R2, Mpd, Networkaudiod, RoonServer, Hqplayer Embedded, UpMPDcli, BubbleUpnpRamdisk mode 4: Squeezelite, Squeezelite-R2, Mpd, Networkaudiod, RoonServer, Hqplayer Embedded, LMS, UpMPDcli, BubbleUpnp RamSave: save changes to disk (this works on the fly: ramdisk automatically restarts after saving)Add ramdisk: Add the ramdisk at system startup (also works with the system in RAM)Remove ramdisk: Remove the ramdisk from system startup (also works with the system in RAM) 2 and 4? no 5? Link to comment
shang_2000 Posted May 1, 2020 Share Posted May 1, 2020 On 4/29/2020 at 12:13 AM, antonellocaroli said: Yes, we're getting closer to summer and it's starting to get hotter and hotter...hopefully... LMS can not play 192/32 flac ,Can it be solved by setting? Looks like LMS can only play 24bit flac, not 32bit? Link to comment
shang_2000 Posted May 1, 2020 Share Posted May 1, 2020 my dac is RME ADI-2 fs,support 32bit,LMS of daphile can play 32bit squeezelite r2 select 32! but gentooplayer can not play 32 Link to comment
shang_2000 Posted May 1, 2020 Share Posted May 1, 2020 The screenshot you sent was set in that place of LMS? Link to comment
shang_2000 Posted May 1, 2020 Share Posted May 1, 2020 6 minutes ago, antonellocaroli said: daphile pushes 32bit to allo usbridge sign, without setting, can play 32bit, but gentooplayer cannot Link to comment
shang_2000 Posted May 1, 2020 Share Posted May 1, 2020 2 hours ago, antonellocaroli said: 您对Daphile足够了解,以了解她如何处理该文件?不幸的是,我不认识他,也不知道他在做什么... 您的意思是您可以验证她对wav文件的处理方式? Thanks for the reply, I will try it at night! Link to comment
shang_2000 Posted May 2, 2020 Share Posted May 2, 2020 22 hours ago, antonellocaroli said: anyway, if you don't want to use C-3PO, I ran some tests and it should work. You have to go to LMS setting > Advanced > File Types and set it so wav: And clic apply!!! Can the new version of gentooplayer x86 64 be directly added to samba settings selection and network bridge settings selection? These 2 functions are very useful! Link to comment
shang_2000 Posted May 5, 2020 Share Posted May 5, 2020 I reinstalled the system and the problem appeared again! On 5/4/2020 at 2:42 AM, antonellocaroli said: anyway GP uses "performance" as the default governor... Now I changed something in the profiles (some kernel boot parameters)... Profile 6 is the one that returns to the initial state then gp-update and then profile6 I think I'll add a "standard" entry to make it clearer... I reinstalled the system and the problem appeared again! >>> Verifying ebuild manifests >>> Emerging (1 of 1) media-sound/logitechmediaserver-bin-8.0.0_pre20200424::antonellocaroli >>> Downloading 'http://downloads.slimdevices.com/nightly/8.0/lms/a134b499f9cfced1e15bd4008fe9f4ab8f0fa089//logitechmediaserver-8.0.0-1587791586.tgz' --2020-05-05 13:11:05-- http://downloads.slimdevices.com/nightly/8.0/lms/a134b499f9cfced1e15bd4008fe9f4ab8f0fa089//logitechmediaserver-8.0.0-1587791586.tgz Resolving downloads.slimdevices.com... 99.84.130.101, 99.84.130.120, 99.84.130.22, ... Connecting to downloads.slimdevices.com|99.84.130.101|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2020-05-05 13:11:05 ERROR 404: Not Found. !!! Couldn't download 'logitechmediaserver-8.0.0-1587791586.tgz'. Aborting. * Fetch failed for 'media-sound/logitechmediaserver-bin-8.0.0_pre20200424', Log file: * '/var/tmp/portage/media-sound/logitechmediaserver-bin-8.0.0_pre20200424/temp/build.log' >>> Failed to emerge media-sound/logitechmediaserver-bin-8.0.0_pre20200424, Log file: >>> '/var/tmp/portage/media-sound/logitechmediaserver-bin-8.0.0_pre20200424/temp/build.log' * Messages for package media-sound/logitechmediaserver-bin-8.0.0_pre20200424: * Fetch failed for 'media-sound/logitechmediaserver-bin-8.0.0_pre20200424', Log file: * '/var/tmp/portage/media-sound/logitechmediaserver-bin-8.0.0_pre20200424/temp/build.log' Link to comment
shang_2000 Posted May 9, 2020 Share Posted May 9, 2020 16 hours ago, antonellocaroli said: exfat is not supported by defaulthttps://github.com/gentooplayer/gentooplayer.github.io/wiki/Filesystem-Supported I see that sambr has been integrated into the system webpage, but after I set it up, I entered sambr in win10. I don't know which one should be used for the username and password? The ssh user and password cannot be entered! Link to comment
shang_2000 Posted May 9, 2020 Share Posted May 9, 2020 2 hours ago, antonellocaroli said: in theory it shouldn't ask you for a user and password. if you're on x86 anyway: add gp user to samba smbpasswd -a gp type the password (ex: gentooplayer) restart samba and then from windows use those credentials thanks,It would be perfect if the network bridge settings can also be integrated into the web settings like samba! Link to comment
shang_2000 Posted May 9, 2020 Share Posted May 9, 2020 4 hours ago, antonellocaroli said: in theory it shouldn't ask you for a user and password. if you're on x86 anyway: add gp user to samba smbpasswd -a gp type the password (ex: gentooplayer) restart samba and then from windows use those credentials I can now enter the samba shared folder on win10, but it can only be read, without the permission to write and delete. How do I set it up? Link to comment
shang_2000 Posted May 13, 2020 Share Posted May 13, 2020 19 hours ago, antonellocaroli said: let me see if I can replicate the problem you can post the result of these commands: emerge --search net-misc/chrony and rc-update show -v static ip or dhcp? How does mympd access control through the webpage? The IP of gentooplayer cannot enter the control! Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now