mikicasellas Posted March 21, 2017 Share Posted March 21, 2017 Hi, I found this so far as i am in the same journey: I is not a complete list but i am trying to build an idea of how i am doing it or what should i change, for starters i am guessing the Power supply...any ideas or suggestions? I would like a finless case, but not sure if i can put all these in... ER + PH DR7T - TAIKO Server + PH DR7T ( HQPOs + ROON ) JCAT XE USB - Lampizator Baltic 4 - D-Athena preamp - K- EX-M7 amp - PMC Twenty5 26 Link to comment
mikicasellas Posted March 21, 2017 Share Posted March 21, 2017 Sorry i had to edit ER + PH DR7T - TAIKO Server + PH DR7T ( HQPOs + ROON ) JCAT XE USB - Lampizator Baltic 4 - D-Athena preamp - K- EX-M7 amp - PMC Twenty5 26 Link to comment
mikicasellas Posted March 21, 2017 Share Posted March 21, 2017 1 hour ago, Keith_W said: Nobody can give you any hardware recommendations until you tell us what you want to do with it. I am in the process of building a "100% audiophile computer" myself. This will be my second attempt - I got quite a few things wrong with my first attempt (because I relied on the advice of forum members who didn't know exactly what I required) ... but I learnt a lot. 1. What software do you want to run? <-- this is the most important question! 2. Is your computer going to sit on your equipment rack, or in another room? Do you prefer it to be of a certain size? 3. Does your computer require a digital input for an external digital source (e.g. CD player, analog-digital converter, etc) 4. What is your budget? Yes you are absolutely right, Budget around 1000 to 1500 tops if necessary. Ok this is my actual setup with ROON and want to go ROON/HQPLAYER: My actual system is Modem/Router > CAT 6A > MacMini > Microrendu/Ultracaps LPS-1 > Curious USB cable > Auralic VEGA > Preamp > AMP > Speakers My next move is meant to be: Modem/Router > CAT 6A > Paul Pang switch with TXCO clock > CAT 6A > EMO EN-70HD Ethernet isolator > CAT 6A > MacMini (perhaps with Uptone modified w/JS-2/MMK) or Audiophile PC > CAT 6A > Microrendu/Ultracaps LPS-1 > ISO REGEN/UPCB adapter > Auralic VEGA > Preamp > AMP > Speakers Regards ER + PH DR7T - TAIKO Server + PH DR7T ( HQPOs + ROON ) JCAT XE USB - Lampizator Baltic 4 - D-Athena preamp - K- EX-M7 amp - PMC Twenty5 26 Link to comment
mikicasellas Posted March 22, 2017 Share Posted March 22, 2017 JS-2 was on my mind as a 1st player if things were going to go up, i know... Well iam a troglodita, so my guess is be ready for 512 or 1024 thru HQP when DAC is capable, future is near and changes are always around, so if i will invest on this i prefer to be `repaired for some time if things go that up So you think fanless case is not necessary? just a good JS-2 ER + PH DR7T - TAIKO Server + PH DR7T ( HQPOs + ROON ) JCAT XE USB - Lampizator Baltic 4 - D-Athena preamp - K- EX-M7 amp - PMC Twenty5 26 Link to comment
mikicasellas Posted March 22, 2017 Share Posted March 22, 2017 15 hours ago, The Computer Audiophile said: Two big items that can lead this search are 1) HQPlayer and 2) use of a microRendu. HQP requires power. mR enables you to use a big fat ugly PC and put it in another room. In my experience, when using the mR, my computer didn't really matter because I was sending audio over Ethernet and it was powerful enough to do what I needed. Others have very different experience though, and only you will know which path will work in your situation. Thanks a lot, Does my Mac Mini with Quad Core intel i7 with 8RAM could be up to that task, anyone using one for this purpose? MacMini is the one i am using now and although i purchased the SonicTrasporter i5 I keep switching between one and the other and i don't really hear any differences...perhaps if i make a modification to my power output on my MacMini or only to the ethernet sources (switch and isolators on the ethernet path) Thanks again Below two pic of how is my system setup now and how i am planning to do on the ethernet route... jjborders 1 ER + PH DR7T - TAIKO Server + PH DR7T ( HQPOs + ROON ) JCAT XE USB - Lampizator Baltic 4 - D-Athena preamp - K- EX-M7 amp - PMC Twenty5 26 Link to comment
mikicasellas Posted March 23, 2017 Share Posted March 23, 2017 Hello everyone, Very helpful inputs for this tasks, Thanks!! Now i am using a ST-i5, but i also have a MacMini late 2012 (quad Core i7 / 8RAM)...should i need another proper PC for the HQplayer tasks, does anyone here is using a MacMini for HQP? My system is in "Pause" now because of a problem of construction in my house so i am living out until april, so i have not had even time to upgrade mR to the newest software version nor ROON. I know there will be a lot of changes in sound when i am back...NeW speakers on the way during april, NEW TOPAZ isolator transformer to connect, NEW software to try (HQPLayer) and NEW Software upgrade in both new version of mR and ROON with up-sampling and MQA files in TIDAL/ROON. So i am planning ahead specially for HQplayer possible requirements. I am really excited about all these upcoming changes!!! Best regards ER + PH DR7T - TAIKO Server + PH DR7T ( HQPOs + ROON ) JCAT XE USB - Lampizator Baltic 4 - D-Athena preamp - K- EX-M7 amp - PMC Twenty5 26 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now