Jump to content

Search the Community

Showing results for tags 'nuc'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Categories

  • Reviews
  • Bits and Bytes
  • Immersive Audiophile
  • The Best Version Of ...
  • Audio Shows
  • Great Albums
  • CA Academy
  • The Interview Series
  • Podcast
  • Contributors
  • Audiophile 5
  • Digital Vinyl
  • The Music In Me

Categories

  • DACs
  • DDCs
  • Music Servers / Streamers
  • Software
  • Power Supplies / Products
  • Speakers
  • Headphones
  • Headphone Amplifiers
  • Amplifiers
  • Accessories
  • Cables
  • Analog Components
  • All-in-One Systems
  • Computers / Networking
  • Preamp / Processor
  • AVR (Audio / Video Receiver)

Blogs

  • Blizzard's Blog
  • Audiotruth's Blog
  • Rishi's Blog
  • geroijzlzy's Blog
  • ABielewicz_Mytek's Blog
  • RHauser's Blog
  • The Computer Audiophile's Blog
  • j dub's Blog
  • Bernardo C's Blog
  • gmgraves's Blog
  • AudioPhil's Blog
  • Catinaromine's Blog
  • Wavelength's Blog
  • soundjack's Blog
  • GBDPower's Blog
  • rom661's Blog
  • Shiggy's Blog
  • altuixde's Blog
  • carlseibert's Blog
  • John Doe's Blog
  • jabbr's Blog
  • usblues's Blog
  • TheTherapist's Blog
  • CMcArthur's Blog
  • wappinghigh's Blog
  • sebastien696's Blog
  • About Full Range Speakers, Sound Stage, Phase Congruency and ... Goosebumps
  • baxtus's Blog
  • alehel's Blog
  • L7078's Blog
  • jtrade's Blog
  • Buffalo Boy's Blog
  • ZKVL's Blog
  • blindjim's Blog
  • Cycleman's Blog
  • WBonwick's Blog
  • wannabtech's Blog
  • sig8's Blog
  • CCollett's Blog
  • bluedy1's Blog
  • Poiram's Blog
  • Purite Audio's Blog
  • Conrad65's Blog
  • EIves's Blog
  • DanRubin's Blog
  • joywilkins's Blog
  • BSisson's Blog
  • sauerball's Blog
  • YashN's Blog
  • TAnderton's Blog
  • Melvin's Foolish Things
  • owensan's Blog
  • RFoley's Blog
  • bixby's Blog
  • davidejenn's Blog
  • LStockard's Blog
  • musicfirst's Blog
  • cohenllie's Blog
  • LCarlone's Blog
  • jay's Blog
  • edgarbmcgi's Blog
  • Kartzon's Blog
  • ericuco's Blog
  • waderlatha's Blog
  • DMastropi's Blog
  • AudioDoctor's Blog
  • prestonscr's Blog
  • RBrroks's Blog
  • zerung's Blog
  • boyerard's Blog
  • JRODRIGUEZ74740's Blog
  • Speakne's Blog
  • Maynard's Blog
  • ehous's Blog
  • reeceenie's Blog
  • JBloodswo's Blog
  • ted_b's Blog
  • Dyer157's Blog
  • A8829's Blog
  • jacobacci's Blog
  • ramoncgrav's Blog
  • Solstice380's Blog
  • mwheelerk's Blog
  • michaelvfu's Blog
  • ERPEQ's Blog
  • myco's Blog
  • Keith157's Blog
  • KGEX's Blog
  • HiFiGuy528's Blog
  • herbertwha's Blog
  • HPalmer's Blog
  • wgb113's Blog
  • aylorelmer31913's Blog
  • Murmelbier's Blog
  • Lowlands's Blog
  • prestonsc's Blog
  • CDSX's Blog
  • Audio_ELF's Blog
  • michealtre's Blog
  • roccostrew's Blog
  • darascal's Blog
  • sandersseph's Blog
  • EKetcham's Blog
  • Soupy goodness?
  • stephemoore's Blog
  • JSchirmei's Blog
  • Brucemck2's Blog
  • Mixtiffinuel's Blog
  • CH06's Blog
  • BigGuy's Blog
  • peterpenn's Blog
  • O4646's Blog
  • tonmeister86's Blog
  • vaughnalar's Blog
  • JHWQ's Blog
  • vortecjr's Blog
  • jamescwill's Blog
  • MBass's Blog
  • nicholas029's Blog
  • Noiriale's Blog
  • KUWD's Blog
  • dsgoldy's Blog
  • teresa157's Blog
  • CFarkas's Blog
  • jostp's Blog
  • rogerldohe's Blog
  • gamve's Blog
  • taj's Blog
  • clintcwini's Blog
  • EEdmondst's Blog
  • redscouser's Blog
  • mikecraft101's Blog
  • LCollazo's Blog
  • gsquared's Blog
  • noemihay101's Blog
  • AEph's Blog
  • pacwin's Blog
  • georgele's Blog
  • VSmall's Blog
  • davo's Blog
  • luthermsmi's Blog
  • M0833's Blog
  • bdiament's Blog
  • Irene157's Blog
  • prowler5150's Blog
  • gstew's Blog
  • richardsle's Blog
  • opethrox's Blog
  • Masis's Blog
  • shannoncjo's Blog
  • Jaymoon's Blog
  • jemhayward's Blog
  • deboreee's Blog
  • JR4321's Blog
  • drambuie's Blog
  • brentgable101's Blog
  • Jck's Blog
  • Kathy Geisler's Blog
  • Roof157's Blog
  • markwb's Blog
  • Eisenmac's Blog
  • Sheppard157's Blog
  • kocl's Blog
  • mikemercer's Blog
  • robert157's Blog
  • Gilbert Klein's Blog
  • HDtracks's Blog
  • Hihische's Blog
  • Kugel's Blog
  • dsnyder's Blog
  • rodneyabri's Blog
  • Mordicai's Blog
  • thinkdifferent's Blog
  • clarkstone101's Blog
  • michaelD's Blog
  • yun's Blog
  • theodorepl's Blog
  • skeetso's Blog
  • JohnnyTLuxury's Blog
  • Miller157's Blog
  • p.watel's Blog
  • beetlemania's Blog
  • Cindy157's Blog
  • Snoopy
  • firedog's Blog
  • Yeager157's Blog
  • BitGuyCA's Blog
  • bobdog's Blog
  • odisack101's Blog
  • waltyuk's Blog
  • shum3s's Blog
  • James157's Blog
  • 徐中銳's Blog
  • Type35's Blog
  • Lieber157's Blog
  • Music Player Fav
  • francisleung's Blog
  • copelan157's Blog
  • crenca's Blog
  • Akapod's Blog
  • crisall101's Blog
  • NAIDIVER's Blog
  • David Solomon Peachtree Audio's Blog
  • robkane101's Blog
  • BuckChaser's Blog
  • ltddrop's Blog
  • puzzlinghobby's Blog
  • Uwe's Blog
  • cpvniii's Blog
  • amyreily101's Blog
  • whoozwah's Blog
  • Paul R's Blog
  • jonashoover101's Blog
  • Upgrading Clock on Auralic Vega DAC
  • Dan Gravell's Blog
  • snip3r's Blog
  • CraigR's Blog
  • Jud's Blog
  • TuyetObri's Blog
  • RedSectorA's Blog
  • SeeHear's Blog
  • bomoAbova's Blog
  • MayfromSOtM's Blog
  • ChrisG's Blog
  • vladid's Blog
  • RJ Kamsma's Blog
  • clear_energy's Blog
  • Brian's Blog
  • Aries, Vega, Streaming...is that static or distortion HELP!
  • freddiejohn's Blog
  • jasonovic's Blog
  • BP2301's Blog
  • RobGoodison's Blog
  • coreaudiotechnology's Blog
  • nmolnar's Blog
  • hvbias's Blog
  • Tmk
  • thu292's Blog
  • MarkS's Blog
  • John Siau's Blog
  • bigbob's Blog
  • Miska's Blog
  • bonkers's Blog
  • terrabiteme's Blog
  • The Ill-Tempered Audiophool
  • NicoleLan's Blog
  • krelldog's Blog
  • Sasaki's Blog
  • deefletcher28's Blog
  • Rustyears's Blog
  • musiclover's Blog
  • JamisonRi's Blog
  • djd1122's Blog
  • RankStranger's Blog
  • BernieBis's Blog
  • bgoc's Blog
  • Soniclast's Blog
  • Pure Vinyl Club's Blog
  • Evo-No-Revo's Blog
  • chandlee4696
  • Trabb's Blog
  • Random Thoughts
  • Rosita11X's Blog
  • pipecrash's Blog
  • rkay5's Blog
  • -
  • optimator's Blog
  • edorr's Blog
  • Dulcie49U's Blog
  • Sergey's Blog
  • Matt Ashland's Blog
  • Techgirl's Blog
  • Audio-68's Blog
  • gypsykirk's Blog
  • Bigecrycliree's Blog
  • addylo's Blog
  • woodford's Blog
  • Zopaupshoks's Blog
  • Gibsonluva's Blog
  • Frittyorbinab's Blog
  • SOLD my VEGA...NEXT?
  • arw's Blog
  • Spappyappolla's Blog
  • The Art of Audio Conjuring
  • ItemAudio's Blog
  • whicheMic's Blog
  • Streaming music?
  • audiofilodigital's Blog
  • Loanisewwails's Blog
  • Best Headphones Reviews
  • wookie's Blog
  • zooggrofoma's Blog
  • GeoLocate
  • Sunday-Morning Music
  • Warafruiz's Blog
  • So Grey It Turns Blue
  • Ned Kelly's Blog
  • fetanommaRede's Blog
  • Vintage & Retro Record Players
  • bobbmd's Blog
  • murlodolf's Blog
  • Dave's CA BLOG
  • Bemestootly's Blog
  • simplon's Blog
  • inpudgenure's Blog
  • Audio Notes
  • BahamaBob's Blog
  • acumnentemoms's Blog
  • dbb's Blog
  • Coolinown's Blog
  • esldude's Blog
  • EminamomRor's Blog
  • maheshkc's Blog
  • Jecydayrarmal's Blog
  • AudioExplorations's Blog
  • bobkatz's Blog
  • bernharddiner's Blog
  • Benedict8's Blog
  • desbiss's Blog
  • Pansy2814's Blog
  • biberfan's Blog
  • EuniceN13's Blog
  • 1s And 0s Music
  • melomaniac's Blog
  • audiventory's Blog
  • hab2juin4700's Blog
  • maltby's Blog
  • abobbypity1619's Blog
  • coxhaus's Blog
  • apatrickmtexada7449's Blog
  • DigiPete's Blog
  • plakey's Blog
  • seasalt55's Blog
  • abobycahvsa7333's Blog
  • newss247
  • mcjim's Blog
  • gregorstivanovy9647's Blog
  • bgarris
  • autoformer's Blog
  • habjuin4698's Blog
  • paradisegolfing
  • Phil C's Blog
  • Marguerit's Blog
  • douglas882's Blog
  • MiguelPai's Blog
  • computer settings
  • mitchco's Blog
  • bamaximstexaxdy842's Blog
  • bstcyr's Blog
  • LiamSwens's Blog
  • Chip Gallo
  • mgaluzzi's Blog
  • apityfrancesa3251's Blog
  • REShaman's Blog
  • charles6680's Blog
  • Everything
  • wooferman's Blog
  • TerranceD's Blog
  • Describing the Technologies in Computer Audio
  • Handy bash scripts for alsa and mpd
  • cammy7's Blog
  • High Fidelity
  • Garf's Blog
  • Hetcherlkh's Blog
  • cjf's Blog
  • noyb555's Blog
  • emailtim's Blog
  • Item's Blog
  • mgunin's Blog
  • Grey Area...
  • guymrob's Blog
  • CD
  • k-man's Blog
  • bgregorastivaovay5844's Blog
  • krass's Blog
  • gregorasfrances7001's Blog
  • Jsmith's Blog
  • abc123's Blog
  • ogie's Blog
  • ajehnztsy8069's Blog
  • BCRich's Blog
  • bangelasmaarlyy6768's Blog
  • curmudgeon's Blog
  • babobbswifty3145's Blog
  • ringenesherre's Blog
  • Starre's Blog
  • jumper's Blog
  • NadinePen's Blog
  • Keweenaw
  • donaldj68's Blog
  • KECShona's Blog
  • Setting Up RPI 32-bit GentooPlayer (version 191103)
  • tomtom's Blog
  • shaidr's Blog
  • LBob's Blog
  • RaleighDe's Blog
  • Julf's Blog
  • LucretiaS's Blog
  • DarkHelmet's Blog
  • Candelari's Blog
  • Audio Preordination
  • mountainmusic's Blog
  • CarriePed's Blog
  • DM's Blog
  • jesuscheung's Blog
  • Qhwoeprktiyn's blog
  • monteverdi's Blog
  • PauleenL's Blog
  • bpw's Blog
  • bpittyarkay4446's Blog
  • Vvd's Blog
  • david.parker83's Blog
  • justM's Blog
  • Audioroot
  • dudley's Blog
  • Internal
  • Kiwi2's Blog
  • Zephilim's Blog
  • DuckToller's Sonic Encounters
  • TGoldblum's Blog
  • douglas046's Blog
  • Silly Audio Adventures from Sillypore
  • CAPS 2 Build and kudos to Chris Connaker
  • ElidaPend's Blog
  • mayhem13's Blog
  • sonicxtc's Blog
  • JoeyGS's Blog
  • BirgitWil's Blog
  • Zakus's Blog
  • ShereeStr's Blog
  • audiojim's Blog
  • TeenaEJE's Blog
  • aphile's Blog
  • TiaraNbc's Blog
  • mav52's Blog
  • Terrance1's Blog
  • jackfish's Blog
  • Master's Musings
  • Igor's Blog
  • Results from Native DSD's Expanded Catalog
  • allisonbhill's Blog
  • PopPop's Blog
  • Notes from Recent Finds, No. 17 - Releases from NativeDSD by Rushton Paul
  • Rob McCance's Blog
  • Georgiy76's Blog
  • MusicEars's Blog
  • phase's Blog
  • ThrillerUSA's Blog
  • Beatriz73's Blog
  • InAurem_a2d's Blog
  • Brummle's Blog
  • seatrope's Blog
  • ValerieNl's Blog
  • TimU's Blog
  • JoellenMa's Blog
  • Jud the Prof's Blog
  • LeifHobar's Blog
  • Lenrick's Blog
  • DreamOperator's Blog
  • miggyboys's Blog
  • EdmontonCanuck's Blog
  • runrob1258's Blog
  • SherlynTo's Blog
  • MijnCDlijst's Blog
  • Bill Lord's Blog
  • YardCrap's Blog
  • nodolby's Blog
  • mkrzych's Blog
  • davidbeinct's Blog
  • thxtheater's Blog
  • happywater's Blog
  • prufrock's Blog
  • WayneScha's Blog
  • HighFidelity's Blog
  • Shino Tseng's Blog
  • jjkale's Blog
  • VernonFWP's Blog
  • muhammadnuman90's Blog
  • RegenaGar's Blog
  • Part-Time Audiophile's Blog
  • LanePJBN's Blog
  • sjoc2000's Blog
  • SherriDea's Blog
  • chachi_dee's Blog
  • Neil08A's Blog
  • Holowlegs's Blog
  • ToddSAJ's Blog
  • Jeannette's Blog
  • jas's Blog
  • BattleScarze's Blog
  • IsiahTubb's Blog
  • CDal's Blog
  • DevonCosb's Blog
  • nieldm's Blog
  • realitybytes's Blog
  • Sam Lord's Blog
  • HifiPCGuide's Blog
  • Alain Guindon's Blog
  • jonbernard's Blog
  • anubis73's Blog
  • DelilahSh's Blog
  • app-store's Blog
  • CharisBir's Blog
  • dalethorn's Blog
  • audioexile's Blog
  • ketamaxi's Blog
  • Quyen8797's Blog
  • yanF584's Blog
  • DoyleBolt's Blog
  • Claude's Blog
  • BorisKilv's Blog
  • thomasling's Blog
  • Ventoux's Blog
  • Twileavililip's Blog
  • Fillip's Blog
  • chg's Blog
  • ZacharyO7's Blog
  • JohnTeigh's Blog
  • AshliPrie's Blog
  • BosseZoow's Blog
  • Mike Piehl's Blog
  • نوني's Blog
  • BaileyQ51's Blog
  • RickDastardly's Blog
  • HDPhonic's Blog
  • bleabledawl's Blog
  • AdrienneS's Blog
  • Peter C's Blog
  • MarshallF's Blog
  • avisualimageof's Blog
  • STC's Blog
  • Valerio's Blog
  • LeonChauv's Blog
  • Aidelsunsen's Blog
  • roberto2's Blog
  • lrwkdionh's Blog
  • Vinnie Rossi's Blog
  • kynjgkmvy's Blog
  • nike free womens
  • sbgk's Blog
  • muffinman's Blog
  • BippicailiMut's Blog
  • MGalloway's Blog
  • odelay's Blog
  • BPerryman's Blog
  • dfaewdfw's Blog
  • MPTDQ's Blog
  • richardp01's Blog
  • rand's Blog
  • AdamK's Blog
  • CGosselin's Blog
  • Moiz Fidelity's Blog
  • LRosenber's Blog
  • NOMBEDES's Blog
  • JLake's Blog
  • zenpmd's Blog
  • LizzieM's Blog
  • zoot45's Blog
  • VRAVN's Blog
  • attleenie's Blog
  • BGarsia's Blog
  • coolove's Blog
  • ethan417's Blog
  • kayenblogx's Blog
  • BethanyG.'s Blog
  • ThierryNK's Blog
  • Asiantiger13's Blog
  • liuxiangfei's Blog
  • leomitch's Blog
  • seanmonica's Blog
  • Marino Marco's Blog
  • Tim-Ann's Blog
  • Hoatittee's Blog
  • RMurnin's Blog
  • rennq's Blog
  • Michael-Elijah Audio's Blog
  • Houcouroche's Blog
  • Franatic's Blog
  • Tekcetera, Inc.'s Blog
  • MY49's Blog
  • wkhanna's Blog
  • DrBlakelock's Blog
  • Foendanny's Blog
  • jeffharry's Blog
  • asdfgt23k's Blog
  • Xovilichter's Blog
  • eveasandexta9976's Blog
  • nilkybanach's Blog
  • Invarenex's Blog
  • HJXU's Blog
  • ALovegrov's Blog
  • Tetphape61's Blog
  • C1276's Blog
  • goonobGap61's Blog
  • TWirth's Blog
  • baddog's Blog
  • DrSchlieter's Blog
  • bbbyfrancesay962's Blog
  • DrMahnie's Blog
  • attiddereek's Blog
  • DrZepkae's Blog
  • bjenzlittley3544's Blog
  • F17V's Blog
  • cssimagebutton's Blog
  • KButeau's Blog
  • EllaZ's Blog
  • Flavio Lanteri's Blog
  • BHardman's Blog
  • Geoffrey Armstrong's Blog
  • VHoddle's Blog
  • addild19334's Blog
  • ARicher's Blog
  • Birddogthecat's Blog
  • KBradway's Blog
  • womanlycamper's Blog
  • medolygilpin's Blog
  • McIntosh Group's Blog
  • Club TBVO with Josh Mound's Articles
  • Lumin's Blog

Categories

Product Groups

There are no results to display.

Forums

  • Equipment
    • Questions and Answers
    • General Forum
    • Buy & Sell Audio and Computer Components
    • Immersive Audio
    • Music Servers
    • DAC - Digital to Analog Conversion
    • Analog Components
    • Disk Storage / Music Library Storage
    • Networking, Networked Audio, and Streaming
    • Headphones & Speakers
    • Software
    • iTunes and Everything Apple
    • Objective-Fi
    • Article Comments
  • Music
    • Music Downloads & Streaming
    • Music in General
    • Music Analysis - Objective & Subjective
    • In Memoriam
  • Sponsored Forums
    • Sonore (Sponsored)
    • UpTone Audio (Sponsored)
    • AfterDark (Sponsored)
    • SOtM (Sponsored)

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


Member Title


Location


Audio System


About Me

Found 17 results

  1. Hello all, I’m using a Nuc with an external HDD for music storage (powered by USB). This NUC is connected to a switch, not directly to my streamer. I just ordered a fanless case that can accept a 2nd disk. I’ve read opinions about ssd vs hdd but it is usually in the context of a direct connexion to the dac/streamer. In my case, would an external HDD/SSD with its one PSU give a noticeable uptick in SQ compared to an internal disk with SATA? Thank you!
  2. So are you afraid of ESD? Does the thought of Arctic Silver Heatsink Paste make you go cold? Are you fearful of Phillips screwdrivers? Do you still want to play with the NUC? I have found the Goldilocks computer for you. Semi-Custom Fan-less NUC using the Dawson Canyon boards, we have come to love! Orderable with Optane SSD and much more. The system is fully warranted and you can extend the warranty. You can order it with our without an OS installed. (At least get Ubuntu installed for backup and order a USB stick from them) Simply NUC has a custom build that is perfect: https://simplynuc.com. At the top of the page see the custom NUC button. Click that and scroll down to the Fanless case section and pick the i7 model. The options I have selected above are "perfect" for a NUC to run Roon Server, etc. Get Ubuntu installed so the machine has something to run when you start up. The PORCOOLPINE comes with a power supply so you can get going right away. I purchased my Dawson Canyon board from them so I am only a happy customer. I was going to have a model of these custom built for resale, but there was not enough interest and my budget would not allow speculation. You can get an upgraded power supply at some point. You can order any of the options you would like. I just did an Euphony OS setup post that you can follow or you can setup Audio Linux from my NUC build post: HAVE FUN Bob Here is an interesting review of the PORCOOLPINE from another site: https://techsterweb.com/2019/01/27/porcoolpine/
  3. I have decided to not head down this road! I was going to do an enhanced custom version of this with OS installed and provide setup. The numbers are not there for my business to proceed. Here is what I think is a better way for everyone. I am looking at a way to source a semi-custom fan-less NUC endpoint or server running the NUC7i7DNxx board (Dawson Canon). I am proposing a product that would use this board with a case and an SMPS. There would be a couple of configuration options that include memory, Optane SSD, possibly WIFI. The hardware would have a 1 year warranty that could be extended for a fee. The system would include a license an support for AudioLinux. The current thinking is to provide time limited online and phone support to get the product going on the end user's system as a part of the cost. I am trying to gauge interest. There are several ways that this could go. I am open to suggestions. Think of this as a Raspberry Pi in theory. One step above buying parts at Newegg. No Soldering required. You will still need a display, mouse, keyboard for setup. It might not work with your DAC or your whatever. The final cost is not determined. Bob NOTE I am a managed service provider and this is a possible extension of my business.
  4. I recently built a NUC into an Akasa case as Roon networking bridge /endpoint with great results I have expanded the project to do a little more tinkering. I briefly played with WiFi, and I am pretty sure that the WiFi was messing with my system. The NUC I am using has an M.2 "e" slot for PCIe networking. There is an M.2 network card that drives an SFP. I am considering putting this in my NUC. https://www.newegg.com/Product/Product.aspx?Item=N82E16833453141&Description=M.2 SFP &cm_re=M.2_SFP-_-33-453-141-_-Product If you have a spare PCIe slot in your server, you can put a PCIe SFP card in the server. https://www.newegg.com/Product/Product.aspx?Item=N82E16833114123&ignorebbr=1 With these two network "cards" we can now test direct fiber between the server and the endpoint. This idea is going through my head while I am testing the TLS modified network switch. I have a PLAN! My current server is a Sonic Transporter i7 DSP that is set up for network bridging. I have a run of bog-standard CAT6 from the basement computer shelf to the system in the Living Room with the NUC. My TLS switch hooked up to an LPS-1.2 in the rack with the stereo. To start testing this idea I ordered some fiber gear from FS.COM as follows. (Ignore the switch for this part of my project) 8-Port Gigabit PoE+ Managed Switch with 2 SFP, 150W ID #73457 US$ 160.00x1 US$ 160.00 1000BASE-BX BiDi SFP 1310nm-TX/1550nm-RX 10km DOM Transceiver Module for FS Switches ID #29892 US$ 9.00x2 US$ 18.00 1000BASE-BX BiDi SFP 1550nm-TX/1310nm-RX 10km DOM Transceiver Module for FS Switches ID #29893 US$ 12.00x2 US$ 24.00 Unmanaged 1x 10/100/1000Base-T RJ45 to 1x 1000Base-X SFP, Gigabit Ethernet Media Converter, AC 100V~240V ID #17237 US$ 31.00x2 US$ 62.00 1m (3ft) LC UPC to LC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable ID #40446 US$ 1.50x2 US$ 3.00 5m (16ft) LC UPC to LC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable ID #40436 US$ 1.90x2 US$ 3.80 15m (49ft) LC UPC to LC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable ID #40441 US$ 3.00x2 US$ 6.00 The first test configuration was system validation placing the FMC devices between the home network and the server using a short fiber cable. Everything operated as expected for four hours while I was working. Plug and Play! Note that the SFP system I am using has a Single Mode single fiber and the SFP's are in pairs transmitting on 1310 or 1550. There is now a 15M fiber cable between the endpoints. I powered the server-side FMC with one rail of the HDPLEX 200 supply. The second FMC is next to the TLS switch. I only have one LPS up there, so the FMC is on the provided SMPS. Here is the test plan outline. *** I like to work backward from what I think will be the best.*** With a little more run-in time on the TLS switch I will listen between the fiber network and Ethernet network with the TLS switch as the last hop before the NUC. Then I will remove the switch and power the FMC with the LPS 1.2 to see how that sounds. Finally drop back to ethernet only. ------- After all that I will decide about trying the direct fiber to the NUC. I am considering building a fanless Xeon server that will have one or two SFP ports to isolate the server from the rest of the network without additional switching or wireless. As a final note the FMC devices are network switch gear and I am sure that they introduce some sort of noise. Much to consider here.
  5. We are trying a new wiki-esque method of showing the settings in AudioLinux. October 2019 Things evolve. Over time I have found that Euphony OS is simpler to install and run and it sounds better to me. I had been running a two box solution with a sever and a couple of different endpoints. My configuration changed over the summer when a new version of Euphony was released that runs the OS in RAM. I have migrated to a single box solution that uses my Xeon Server (see my Xeon thread on that) directly connected to my Kii Three Speaker system. See my profile for the system design. The NUC described here is a Wonderfull endpoint or server if needed. Get the best power supply you can afford and this thing sings! Notes as of 6/25/19 The Dawson Canyon NUC also know as the DNHE / DNKE / DNBE / DNFE system is classified as a commercial grade NUC with a 3yr life cycle. The dnh"E" stands for Extended Life. Most Intel NUC(s) have a refresh cycle of about 18 months to two years. However, anytime Intel releases a commercial grade system to the market, the life cycle is a minimum of 3yrs. According to the roadmap, the Dawson Canyon will continue to be on the market all of 2019 and 2020. Currently, we are dealing with an Intel shortage that should come to rest by the end of July. The NUC(s) impacted are mostly i7 and i3 Dawsons (in all formats H/K/B/F. At the root of the following thread you will find the beginning: If this construction system is too much for you to do, or you want to buy rather than build. Here is one option: I have started a thread on building a music server. See below: There has been a HUGE flurry of activity on the “Massive SQ” thread onAudiophileStyle. The discovery of putting a specific Intel NUC computer into the stereo system as the network endpoint running Audiolinux (AL) in RAM with no other disks has dramatically improved the audio quality for many of us. Here is a link to where the NUC part of this thread “started:” https://audiophilestyle.com/forums/topic/30376-a-novel-way-to-massively-improve-the-sq-of-computer-audio-streaming/?page=359&tab=comments#comment-860030 Two primary NUC models are in use. The single board computers are typically put into a fan-less case, hooked up to a high-quality power supply, booted off of a USB stick into RAM. What I hope to accomplish here is to have a “recipe” for success. Just like baking a cake you need to have your tools and ingredients ready before you start. Remember this is first and foremost a DIY project and t is also a “Work In Progress”. For me, it is also a rousing success. From 0 to NUC/AL/RAM in 2 hours *Not including Prep* To bake our NUC cake, we need the following components and tools. Setup Tools USB Keyboard and Mouse HDMI Monitor and HDMI cable Power supply for the NUC. **** discussion on this later *** Small Phillips screwdriver Anti-static work strap. A well-lit place to work A Windows PC or Mac to download AL and set up the USB stick Internet connection Just the right amount of coffee What needs to be in your Stereo system Ethernet connection A USB cable to the DAC Power supply for the NUC/AL Roon system (my choice, there are others) What you need to buy Two NUC models have been popular in this project. From all reports, they both sound great. According to some the i7 model sounds better and costs more! Take the time to read the relevant parts of the “massive” thread. I chose to get the Core i7 model. Note that the prices are estimates for the USA and do not include tax, shipping, etc. The Celeron Model comes from Intel as a complete system in a box. You need to extract the computer from the box and mount it in the fan-less case. Intel NUC7i7DBNE single board computer. $575 Akasa NUC Plato X7D case $170 OR Intel NUC7CJYH. $130 Akasa Newton JC Fan-less. $100. https://amzn.to/2Wvd7fg Here is the rest of what you need to order: RAM Ballistix Sport LT 8GB Single DDR4 2400. $60. https://amzn.to/2WsAPZr USB Stick. SanDisk Ultra Flair 32GB USB 3. $10 Audio-Linux headless. $49. (license and one year support) Once you order up the parts and get everything in place, let us get Audiolinux setup installed on the USB stick. You can do this from Windows PC or a Mac. I have done both following the instructions on the audio-linux.com website and if you have a PC do it there for speed. The Mac method took 75min to build the same USB stick. *** Etcher does run on MacOS. You should be able to build the USB stick there. *** In your favorite Windows PC web browser download your Linux image and a copy of Etcher. http://audio-linux.com https://www.balena.io/etcher/ Put the USB stick in your machine. Install and run Etcher. Etcher prompts you for the location of the image file you want to flash to your USB stick. Etcher should show the target as your USB drive! MAKE Sure because it ERASES the target! It takes 10-15 minutes to complete flashing the USB stick. While the USB stick is flashing, we can build the NUC board into the case. For the rest of this setup, you need a nice clean workspace and your anti-static strap. Oh and go slow on the Coffee! First, unbox the case remove the top cover to inspect the inside and inventory all of the materials. The top case cover has four small Phillips head screws to remove. Here are three views inside the case. The above views are the inside front with the board holding the power switch, the LEDs and the two USB 3 ports. The small board is the two front USB 2 ports. Below is the inside rearview where the computer board is mounted and the shielded cutouts for the ports. Flip the case over and put the feet on so that to protect the bottom from scratches. There are four feet with screws to attach. Be sure to put them in the correct screw holes. You can now carefully set aside the case as we have to do a “fan-ectomy” on the NUC Board. You are dealing a bare computer motherboard; please observe standard anti-static protection procedures. An anti-static wrist strap and the anti-static bag that the board comes in are your friends. Here are pictures of both sides of the board. On the top side, you have the RAM and M.2 slots and some of the other connections for drives. The second picture shows the included fan and heatsink that we have to remove. First, you need to unplug the fan power cable. The connector is small so be careful pulling it off. Remove two small screws holding the fan down to the heatsink. The heatsink is attached to the motherboard with three screws. In the above picture, you can see them on the silver bar and in the recessed hole in the black part of the heatsink. Carefully remove the screws, and you can pull the heatsink away from the board. Note that the heatsink “grease” sticks them together a bit. Below you can see the separated heatsink and the board with the compound on the CPU (black part). Now you need to clean up the old heatsink compound from the CPU. Use cotton swabs and some alcohol to clean it off. The picture below shows the CPU module after cleanup. Next put the new heatsink grease on the CPU and the heatsink pad on the smaller black rectangle. The pad is a bit fussy to get stuck down. There are some pictures in the install page from Akasa that may help. In my case, they have an addendum showing how they now include the heatsink grease. From the picture below I used too much thermal paste! Thanks, @Dutch for pointing that out. A couple of dots would have been enough Here is a video of better ways. https://www.youtube.com/watch?v=JYwHB2P6GmM It is time to install the board in the case. Carefully set the motherboard on the static bag aside and bring the case back to your workplace. Put the rear of the case closest to you and move the cables out of the way. Observe the part of the case where the CPU seats on the upraised heatsink and the four standoffs for mounting the board. There are four screws and fiber washers to hold the case in place. Carefully set the board CPU side down onto the case aligning it to the standoffs. Being careful not to strip the screws install them all but do not tighten. Once all four screws are in carefully tighten them down. I do them: upper left, lower right, lower left, upper right. Just my method! Next, it is time to connect the cables. The two USB 2 connectors are on the upper left, and the black thin flat ribbon cables plug into them. The two big USB 3 cables plug into the USB connectors on the top. Finally, the multi-color cable plugs into the header. The connector is keyed and goes on the leftmost pins. There is a hole blocked on the connector and a clipped pin on the board. With the connections completed installing the RAM in the bottom slot is next. The bottom slot is slot #2, but folks think it is the right place. The little RAM board goes in at an angle into the connector and is then pressed down to hook into the spring latches on the side. Dress the cables so that you can screw the top plate back on to the case! The “hardware” part complete. Now for the “smoke test.” You need to connect the keyboard, display, mouse, network. Finally, plug in the power cable and press the power switch to turn on the computer. ** do not plug the USB stick in yet ** Making the initial changes to the BIOS If the NUC passed the smoke test, the computer boots up to the BIOS where you have to make some settings changes. Note that on the first screen the UFEI Boot selection is ticked on. Note the temperatures of the CPU. Keep an eye on them as we go forward to make sure you did a good job on the heatsink grease! Mine here is under 30C which is GREAT. Set the BIOS clock on this screen if it is not right. Select the “Advanced” menu selection shown on the above screen to go to the next settings pages. Select the SATA tab and turn off SATA and the activity light. On the Boot Configuration page, I have mine set to boot USB first, Network last and the USB, and Optical are checked on. (may be able to uncheck the Optical). I may be doing a network boot, so I left it alone. On the Secure Boot tab, uncheck the Secure Boot item to disable it. Audioliniux does not use Secure Boot. On the performance tab under Processor, uncheck Hyper-Threading and Turbo Boost. The only other change I have made is to set the Primary Power setting to Balanced Enabled. I think others have set to Low Power. ** Note that this is all still a bit of an experiment and these settings may change. ** Insert your Audiolinux USB stick into one of the USB 3 connectors. You can now use the F10 key to save and exit the BIOS. Audiolinux Setup We are now on the final leg of the setup. With great thanks to Piero Olmeda, the author of Audiolinux distribution this part this part is pretty simple! When the machine boots up, some text goes by and if all is well the computer displays the Audiolinux menu screen. You may see a few differences in this screen depending upon what version of the system menu you have installed. Piero updates the different parts of the OS on a regular basis. Before we start with the configuration, you should update the system. This menu is driven merely by the cursor keys, and the enter key. So cursor down to the update menu and press enter. Since you are not getting ahead of me yet, you are booting and running off of the USB stick, so no RAM mode issues need to be addressed. Note that I am running this NUC as a Roon endpoint so I have not explored other audio packages. During the install steps, you need the default passwords for Audiolinux. I assume that they might change so, please refer to the Audio-Linux.com website to find them. (scroll down and look or search on the page for the correct passwords. Cursor down and select the update menu item. You need to run the first four updates if you are following along with me. I did them in order. (I do not know if that order is “correct”). You will need your passwords during this. After you have completed the last update of the Audiolinux menu go back to the first page and select option 8 Console Mode. That takes you to the command line. DON’T PANIC! Just type in the command: menuand press enter. You have restarted the Audiolinux menu, so the new version runs. You are now going to configure the system to be a Roon endpoint, run in RAM and extreme mode. From the first screen select the configuration menu item. The above screen appears. Select the Roonbridge men item to set-up endpoint. After that completes set number 14 (scroll down) Set real-time priority to “extreme." Finally, select 15 enable ramroot. Select Cancel to return to the main menu screen and select Reboot. The computer reboots and automatically loads the OS into RAM. As the machine boots up and pauses for a few seconds displaying this screen. It will automatically start-up in RAM after that delay. After the boot to RAM is complete, the Audiolinux menu appears. From the Audiolinux menu check the CPU temperature found on the “Status” page. Also check the Audio Status from the “Configuration” Page. HURRAY! Pat yourself on the back. Toast yourself! Your Audiolinux Roon endpoint should be fully operational. Grab a USB cable and DAC and hook them up. Fire up the Roon application to add the new device to your audio system. There are some more steps to perform, but for testing purposes, you can run the system right now to see how it works. I mentioned at the start of this article that a good power supply is beneficial for NUC to produce the best sound. The NUC runs from 12v to 19v DC. There are reports that running at 19V may sound better. Some of the users have the UpTone Audio LPS 1.2 running their Celeron NUCs. Others are using Paul Haynes supplies, and I am sure there are many others. I have an UpTone Audio JS-2 in my system, and it runs my NUC and my ISORegen. Before you put the NUC into production, there are some other settings that you need to do. I am a huge fan of having the clocks running correctly in my computers and setting up Audiolinux to use network time server to keep the clocks on the beat is essential. Some other items can be adjusted as needed. @austinpop has an excellent post describing how to do some of them. https://audiophilestyle.com/forums/topic/54933-audiolinux-and-nuc-troubleshooting-and-tuning/?tab=comments#comment-901393 This little bit of cleanup work requires you to edit a couple of files and run a few commands on the command line in Linux. Now is also the time where you can do some of the fine-tuning and changes that may influence audio quality. I am not going to show the final tweaks of Audiolinux in this article. I want you to play, listen, and read some more. There is another thread on tuning and troubleshooting. https://audiophilestyle.com/forums/topic/54933-audiolinux-and-nuc-troubleshooting-and-tuning/?tab=comments#comment-901393 **** IF you are going to have more than one AudioLinux device running Roon on your network you will most likely run into a problem where Roon gets confused about devices. You will have to apply the fix in this post: https://audiophilestyle.com/forums/topic/54933-audiolinux-and-nuc-troubleshooting-and-tuning/?page=31&tab=comments#comment-918823 I am planning to post a summary of my settings over the next couple of weeks, and I have the time/date setup and fine-tuning in that. *** I am close on this one please stand by**** This article is a summary of my NUC build and a record for my own memory. I hope that others find value in it. There is so much work that has been done by others I cannot thank them all. I have to shout out to the following folks for all their work. @austinpop @lmitche @romaz @greenleo @hifi25nl @rickca I know that there are so many others I cannot remember them All! Thanks Bob Fairbairn ---------------------------------------------------------------- Adding WiFi to the build I have been thinking about adding a WiFi card to the build so I dug around and found the card and antennas on Amazon. So here is ONE WAY to add WiFi to the NUC Parts needed M.2 card for your NUC. In my case the Intel AC-8265. https://amzn.to/2Wt9mH2 Antennas and cables for the card. https://amzn.to/2Bcm5Vx Tools needed Phillips screwdrivers as before Needle nose pliers. 5/16 in socket wrench Small round file You might want to skip the coffee before you do this. Do not forget your anti-static protection ! This is the point where I have to play the robot on "Lost in Space". DANGER WILL ROBINSON The connectors on this card are tiny, fragile, and fussy. In my build, the Akasa case is anodized black and I could not insert the SMA connectors into the case without filing the holes out a bit. NOTE metal filings are conductive and can short out the CPU board. I HIGHLY INSIST that you remove the board and then file the case. HIGHLY INSIST! Here we go This is where the board will go and you can see the rubber grommet for one of the antenna leads. Note that the M.2 board mounting screw has a post below it that has to be removed to put the lower board in. Remove the screw and the post. Here is a view of the socket and the post with the board not installed. The second picture shows the board installed. I had to remove the board to install the antennas leads. *** DO NOT INSTALL THE BOARD BEFORE CONNECTING THE ANTENNA LEADS AND PUTTING THE SMA CONNECTORS ON THE CASE *** Here is the board with the antenna leads connected. It is really close quarters in there. Those connectors are fussy. This shows one of the antenna SMA connectors mounted in the case. I used a 5/16in nut driver to snug up the SMA to the case. The antenna is threaded on and you do not want a loose connector/cable. Finally, the case buttoned up antennas installed. I set up on the bench with keyboard, mouse, and monitor. I can then attach my Chord Mojo for quick test final test and initial audio quality review. Software and BIOS Setup for WiFi There is one BIOS change needed to enable the M.2 card in the machine. Look at the PCI page in Advanced Settings. The WiFi setup is now in the Audio Linux menu! And of course in operation. Foot notes after a few weeks in operation. 1. I have now re-connected the WiFi card as my new home network allows me to create multiple networks. I created a 5GHZ only network SSID for the endpoint. I have that running. I will report further. 2. I am having a very hard time determining if I can hear the difference of the USB stick in or out. I have made some other changes in the network since then and I will go back and re-test.
  6. Yello - so Archimago has a interesting post http://archimago.blogspot.com/2019/02/musings-computer-audio-mythos-comment.html I have always wondered on the advantages of a high end streamer - something like the Sony HAP-Z1ES - I mean there is no denying that they are beautiful machines - but cannot help but wonder how they are better than a well configured computer based system - doubt the internal software would do more then JRiver and cheaper - or even Roon, expensive as it is... But this is too much like a regular NUC - fancy clock notwithstanding <--- and this is Archimago's point - that prbly doesn't matter. Been thinking of moving away from the laptop I use to a NUC, but as a JRiver user, need to research how to configure headless - but maybe Audiolinux is worth a try... Wonder if the DS-1 is worth the extra dough, not for the fancy clock, but just get a fully configure box that just works... v
  7. Following a successful insurance claim, I have an amount to spend on a new audio computer. I previously used a 2009 2.26 gHz Mac mini with SSDs, Mountain Lion & Audirvana+. I want a more family oriented HTPC this time (previously everything was stripped down for audio only). I can have a separate user account for audio if needs be, but I want the machine to be used by the family for streaming HD movies, and light gaming (minecraft etc). It should be fairly future proof. I would like to interface with it via Android tablet & phone (we have no other iThings at home). I am looking at i5 NUC builds & mini ITX builds which are low power, passive cooled SSD machines, or for the same money middle range Mac minis with spinning drives & SMPS. I don't doubt either either machine is more than capable in terms of hardware, but still, a mini ITX build appeals due to a sense of 'audiophile good practice', ie passive cooling, SSD, low power (optional LPSU) and possible PCI expansion. Yet a Mac would have OSX, which is great IMO. So although a modern Intel PC gives more hardware for the same money, I also have to decide between W8.1 and OSX. It has been suggested to me that the Mac will sound better despite the hardware differences, as "OSX is just better for audio". Has anybody any experience of comparing the two operating systems SQ? Or failing that, observations? My impression is this doesn't matter too much, but as I am waiting for the settlement to arrive I might as well ask the question.
  8. I built a music server on the Intel NUC D54250WYK-H1, running Windows 8.1 Pro and JRiver MC20. It works very well. Recently I tried to add an external optical disc drive (via USB), and after much research, setting changes, registry hacks, cannot get it to read discs. Something is missing. The OS recognizes the ODD (it shows up in Device Manager), it simply does not read from discs (audio CD's). I access it from Remote Desktop to manage it. I tried the ODD itself on my Surface 3 Pro, and it worked as expected. The main difference (between the Surface and the NUC) I can see is the lack of Intel Serial IO DMA Controller on the NUC. Could that be it?
  9. I have been reading this websites forum postings for over a year. What a great site. This is my first post. I currenctly use a low end PC to stream music to my system and I am tired of the background noise it puts out. I am ready to jump to a fanless PC. I have read the CAPS forums extensively and want to assemble my own server. I currently own the Elfidelity USB card which I would like to continue using for now with the intention of upgrading later. I would like to ask the community if anyone has found a fanless unit with a PCI-E slot that is capable of solid streaming and rendering. The closest candidate I have found is this unit from Shuttle on Amazon. [h=1]Shuttle XPC SH170R6 SFF Intel Skylake H170 Chipset LGA1151 i3/i5/i7/Pentium, Support 4K HD Video, Dual-channel DDR4 Max 64GB[/h] http://www.amazon.com/Shuttle-SH170R6-Skylake-Chipset-Dual-channel/dp/B016B6B6GI/ref=sr_1_3?s=pc&ie=UTF8&qid=1453675592&sr=1-3&keywords=shuttle+pc While the CPU has a heat pipe cooling mechanism the power supply has a fan. Of course the power supply could be replaced with a Teradac power supply. Has anyone found a better candidate with a PCI-E slot. I would like to keep this project under $700 [h=1][/h] Thank you for any input you can share.
  10. Hello, My previous thread on HDD choice having no feedback (and it seems I can't delete it), and my questions growing, I take the liberty of creating a new one. I've spent a long time searching answers to these questions to no avail (it's often related to custom nucs), please excuse me if I missed them: Goal: Rock on stock nuc + Etherregen + ethernet only dac/streamer 1- Which ram would you advise. I read about Apacer, but is it interesting with a stock nuc or should I spend my money elsewhere? 2- HDD: I was leaning towards an external HDD, but would prefer internal storage to avoid clutter. Same question, given there will be the ERegen between the dac and the nuc. If external is still interesting, SSD or HDD, 2.5 or 3.5? model recommendations? 3- LPS: I'm quite convinced it's important, but would like to avoid multiplying them. Is there any solution able to power 3 different devices at the same time, with a good effect on SQ? 4- Vibration management: I'm a firm believer, have you proven tips for nuc, Switch and HDD? Sorry for all these questions. Thank you very much for your help Cheers Arnaud
  11. Anyone have advice or experience improving sound quality from a nuc? Currently use i5 5425 board, msata ssd, streacom nc1 fanless case (a beauty). --> Purchased a Cooler master 65 watt 9 volt dc adapter. --> Then hrt streamer, marantz 6003, CM5 speakers. Controller via ipad with jriver, music on nas. Sometimes i hear electrical fuzz... Is it worth getting different dc adapter / power supply? Is there a difference with the "front" or "back" usb outputs?
  12. I've following items for sale: 1. SoTM clock modified (with 3 clock taps from SOtM tX-USBultra) NUC 7i7DNHE. 2. Maxed out SoTM tx-USBUltra 9V. Can be switched to 12V by taking out a jumper. Following upgrade were done by SoTM: - enable 3 sCLK-EX clock tabs(from the tX-USbultra) for NUC- Make SMB connections- Evox cap on tX-USBultra- 7N UPOCC copper stranded wire changes- Master clock input(50ohm)- eABS-200 I paid USD $1300 for the upgrade cost alone. The NUC comes with following: 1. Memory: 16GB Corsair Vengeance DDR4 2400Mhz 2. Storage: Intel Optane SSD 800P 58GB (with Windows Server 2019 Evaluation installed with AO 3.0) 3. 65W AC Adapter. 4. Processor: Intel Quad Core i7-8650U 1.9Ghz up to 4.2Ghz Turbo Mode 5. Integrated Wi-Fi support. 6. All the necessary short SMB cables. This works out of the box. Powerful enough to be a stand alone server with HQPlayer upsampling. And of course as a world class streamer! Easily bootable with AudioLinux and Euphony or use the installed WS 2019. You'll have to pay significantly more to get this quality of a music server/streamer. I'm asking $1999 + shipping from 10002. Please add 3% to the total if you are using paypal non-gift option. Pickup is welcome. I'm in NYC/Lower Manhattan. I also have the following to sell: 1. Lush^2 USB cable, 40 CM - $195 2. AudioLinux headless - $30 I will take better picture if desired by a serious buyer.
  13. View Classified Music Linear USB-C/20V 4A LPS Excellent sounding 4A power supply that can power: 1. MacBook/Pro from the front USB-C PD port (5V/20V) or 2. 2.5mm barrel jack rear output to a MBP (unterminated MagSafe cable included) or 3. 2.5mm barrel jack rear output to a NUC (I've been using it with a i7 NUC with success) It drops the noise floor, improves bass and clarity across the board. I've seen the same results on a 2015 MBP and i7 NUC. AC Input : 90-135V / 200 – 264V (Automatic worldwide voltage) DC Output : Front Panel : 5V / 20V : USBC Power Delivery Rear Output : 20V Rated Output : 4A (Total 80W) https://www.musiclinear.com Seller nkbg Date 05/31/20 Price 350.00 USD Category Power Supplies / Power Products
  14. Here is the whole package, with the original costs broken down: tX-USBultra SE with 50Ω master clock: $1470 NUC7i7DNBE board: $620 Plato X7D case: $190 HyperX DDR4-2400 8GB: $75 Modification cost: $600 $450 for NUC $150 - 3 clocks in the tX 3x SMB cables: $100 Shipping to/from Korea: $200 Total: $3255 What isn't listed here of course is the time and effort it took to put this together: delays in getting the parts, assembly efforts, the delays while SOtM is modding the gear, etc, so the buyer avoids all those hassles! Sale limited to continental US shipping addresses only please. I'm asking $2500 the lot, and will include free FedEx shipping. Payment via PayPal.
  15. View Classified FS: Intel NUC7i7DNKE in fanless case w/Apacer RAM Intel NUC7i7DNKE | NUC7i7DNHE | NUC7i7DNBE using 8th gen i7-8650U quad core processor Akasa Plato X7D fanless case 8GB non-ECC Apacer RAM (from Nenon's group buy) Replaced stock feet w/Herbie's Baby Booties WiFi card included (but disconnected) Includes all original hardware, stock SMPS 8/18 price dropped to $400 shipped to CONUS48...thanks for looking! Seller oodalolly Date 07/26/20 Price 400.00 USD Category Music Servers / Streamers
  16. View Classified FS: Intel NUC7PJYH in fanless case Intel NUC7PJYH using Pentium Silver J5005 quad core processor Akasa Newton JC fanless case 8GB Crucial Ballistix memory Replaced stock footers w/Herbie's Grungebuster dots Includes all original hardware and stock SMPS 8/18 Price dropped to $250 shipped to CONUS48...thanks! Seller oodalolly Date 07/26/20 Price 250.00 USD Category Music Servers / Streamers
  17. Regrettably, selling my Intel 7i7 DNHE NUC with 32Gb of RAM and the Plato fanless case that I never got around to installing it in! Price is $650 shipped in the Continental US. I was planning on doing a server/endpoint system, but just never got around to it. I briefly tested it out running Windows and XXHiEnd out of Ram off a linear power supply and honestly it held its own against a Phasure Mach 2 optimized 12 core Xeon Server! It comes with all the original packaging, manuals, power supply, etc. Thanks for looking, Todd
×
×
  • Create New...