Search the Community
Showing results for tags 'budget'.
-
Need to save up for a dac and amp for my HD 700. I don't know if I should get a dac or and amp first. I would want the dac and amp indivisually worth around $125, or a budget of $250 for the two. While I'm waiting I'm wondering if a basic usb to aux could power my headphones better than typical motherboard audio. Here is an example https://www.amazon.com/UGREEN-External-Headphone-Microphone-Desktops/dp/B01N905VOY/ref=sr_1_4?ie=UTF8&qid=1523404147&sr=8-4&keywords=usb+audio
-
As with most audiophiles the world over, I love music. I am an engineer, pianist and classical listener predominantly, but open to all genres and music types and listen avidly to any music type either recommended or discovered. It all started for me, as these things have a wont to, with some money burning a hole in my pocket. A pocket that was not much used to having burning money in it... Countless daily hours over countless months of reading reviews, studying design methodologies and factors influencing sound reproduction, engineering principles and costs, listening sessions to train myself to be able to distinguish quality when heard and what to listen for. A clear obsession with the reproduction of sound. I started with speakers. The purchase of speakers I would suggest should be both the biggest, most personal, and most important part of designing and building a system that is perfect for you; or your wallet. Let's be clear here - the best system is the best system that you can afford. What matters is deriving the best possible sound from the core components that you can afford. That starts with you speakers. The choice of a speaker is a very personal decision and the reality is that when you go above a certain threshold, most speakers are of very fine quality and much better that the start-up audiophile will have ever had access to before. I settled on a used pair of B&W 803's. Perfect for me as they were aesthetically pleasing, sonorous (to my ears), and, most importantly, within budget. Ching - $4,000. Next was the amplifier. Here there is such an unbelievable level of choice as to be mindboggling. I took a very simple rule and applied it. I wanted to spend no more than 50% of my speaker cost on my amplifier. That gave me a budget of $2,000 and significantly limited my options. With an amplifier your main concern should be 1) will it effectively drive your speakers, 2) does it sound good with your speakers and 3) what will you use as your source. I wanted to go digital and the NAD 390DD was (and is) an amazing choice and an amazing amplifier. I got a refurbished unit, some nice transparent cabling and hooked it up to my mac mini as a source playing files from an external hard drive. It was amazing - I was in audiophile heaven. Ching - $2,000 - budget blown. One would think that should be the end of the story. A $6,000 system, some fantastic digital files at 44.1/high resolution and a newly discerning ear to appreciate it all. Those audiophiles out there will well appreciate that this is never quite the case though. As one learns more and more in this hobby, the quest for perfection is a niggling one. What is referenced above is the core - speakers and an amplifier - but the most important aspect, in my opinion, comes after. This is the portion of the journey where you work to make the absolute most of what you have. My beautiful 803's are never going to be $50,000 Wilson's or $80,000 sonus fabers. My 390DD is never going to rival the very best in available amplification. My MacMini will not stand up to a $100,000 DcS stack. But the steps taken post the acquisition of these devices will most definitely allow you to get close. Much closer than you might think possible - particularly up until you get to the speakers. I am just going to give it straight here - in my experience the source and more correctly the chain from source to amplifier has an effect similar to a jump of many $10,000 dollars on the amplifier speaker side. I have heard amazing speakers with amazing amplifiers and if the source is not of sufficient quality and, more importantly, the signal chain from the source to the amplifier, then you are wasting all that money on your amp and speakers. I have no doubt that if you're spending $120,000 on Fabers Aida's then you will have on the best at every level, but if you are operating at a less billionaire like level then the importance of the point above will be much more salient. In utilizing a mac mini for audio I was using usb out to usb in on the amplifier. More than fine. The problem with this is the quality of the power supply in the mini is dubious for audio (switching). You don't need to know all this, but suffice to say you want clean power for good results. Insert iUSB power regulator (or similar) into the chain for immediate improvement. Dramatic improvement in the case of the 390DD. Ching - $200 - we are getting cheaper and closer... Next thing to fix is the inherent problems with USB for audio generally... Now we don't have choice in terms of getting the signal out of the mini, but we do have a choice of what we feed to the amplifier. Enter a USB converter. Suffice to say I spent probably the most amount of time here in terms of research; clocking and conversion is a dark art... I tried multiple devices here in my system - each with their own positives and negatives, but settled; more than settled, fell in love with, the Yellowtec PUC2. This is not the prettiest and very far from the most expensive, but in my considered opinion, the very best; not just for the money, full stop. This device has had the single greatest impact on output quality and I now have a very nice transparent AES cable feeding my 390DD a magnificent, clean, musical digital signal. If you own a 390DD, I will tell you that the AES input is the best - this is not the case on all amplifiers, but for the 390DD the AES is your man. Ching $480 There is one final thing. One final tweak that, if you are searching for the best for your system will be the icing sugar on top. Try using a dedicated card to store your music. The USB bus on my mac mini is busy with external drives and other non audio related activities. The card slot is a clean bus and delivers a mite of extra sparkle. Ching - $50 What's the point here... Well what I want is to hopefully save a little time and heartache for someone that has a similar desire to that which I had. Implement the absolute best audio quality you possibly can on a limited budget (and in my case also with the flexibility of a media centre/TV setup for the mini). My goal was the best digital possible. If your goal is analogue quality then this direction is not for you I would suggest. Especially given the the 390DD has been very badly commented on for its phono stage... I have never tried it and never will. For digital though - it is sublime. $6,730 + a little bit lost in mis-steps along the way is the cost of my music system and I can promise you that I have heard very many relatively well implemented systems across multiple brands at 10x+ of the cost, in dedicated rooms, that don't even come close on multiple criteria - that is obviously while critically listening to the exact same recording. The point is that if you are smart about your expenditure and give the time and effort required to learn, listen, test and repeat, you can achieve amazing results on a comparatively low budget. Many reading this might consider this a nonsensical comment with expenditure as above, but that was my budget. What I am saying is that with care this quality scales. I paid $6000 for the core and $730 to take that core to its highest level. If you can only spend $1,000 on the core then the $730 will still bring that core to its highest level and certainly will be much more valuable than spending that extra $700 on a bit more speaker at the cost of improving the source-amplifier chain. What I have found with all my time is that, while you have to start at the end you will finish at the start. The speakers are the end and still the most important element in reproduction of sound; but it is the start; high quality recordings and the methodology of getting those signals to your amp and speakers which delivers the high fidelity. Bad recording or bad transmission will ruin even the best speaker amp combinations. So if you are going to buy into a high fidelity system this is where you need to focus - on the fidelity. Fidelity is detail and nuance - this is inherent at the start of the signal chain and can only get diluted from there. Once the signal hits your amplifier there is nothing you can do but hope that you remain more than satisfied with your investment in the core components. I want to thank the audiophile community and all the forums and content that exists to make this journey possible for someone starting from a zero base. I don't expect everyone or possibly anyone to agree with what I have said above, but do wish to offer my experience for someone who was where I was and thus pay it forward! Separate note - the 390DD is a direct digital amplifier blending the functions of amplification gain and digital analogue conversion in one device. If you are planning on a class A or A/B amplifier you will have the extra complexity of a DAC to consider. I wish you luck!
-
Hello everyone, my name is Joaquim and I'm 19 years old. As a huge pink floyd fan I got myself over the time a few vinyl records, just for collecting them really, since I never had a turntable...( Sadly the world tends to do this thing so called evolving and these are not so popular as I believe they used to). Well this Christmas my mother fondly got me one to allow me to listen to these records as I so much desired. It was very generous of her because although surely it's price is no way near your guy's equipment I know it was not very easy for her to pay. That said you're probably guessing right that is not a high end one, I'll post a link at the end(but if I can't it's a ENCODER TURNTABLE ‘MEMPHIS’ (BLACK)) The problem here is, as someone who religiously dedicates a time of the day to calmly listen to .flac files on the computer I tend to be a little bit picky when it get to music. I obviously don't want to tell her "its not very good and I don't want it" but I want to make a good use of it. The reason for me coming to ask for help being how can I in any way that does not involve spending much money improve it's sound quality? I am aware that turntable put out a little bit of static noise however it feels like its a little bit too much, I am assuming its not the records, since they were never played before, nor the speakers that it has incorporated since i get a lot of static in the headphones aswell... Is there anything I can do? Do I need to be more specific in anyway? Thanks in advance I'll be waiting for a reply. Encoder Turntable ‘Broadway’ (Red) | Bigben EN
- 9 replies
-
- budget
- pink floyd
-
(and 2 more)
Tagged with:
-
Hi, So, I am looking for some new speaker cable for my mini system. I am still new to forum, so I hope I am posting this in the right spot. The sytem is a Denon D-M39S. It is a fun little system. I want to keep my budget reasonable. I am thinking 15 % of the price of the system for cables plus or minus. I should mention that I also have a Dragonfly DAC 1.2 and am including that price along with the price of the D-M39S to come up with a figure. If you have never heard the D-M39S, it is very musical, without being harsh or tiring. Currently, I have some monster speaker cable it is about a 12 AWG that my friend gave me. At first I really liked it. It ramped up the base and the highs, but I am finding it fatiguing to listen to for long periods (the bog standard cable it came with did not do this). So, I need something new. The specs of the system for the amp/cd player are: Power Output (6 ohm, 1kHz) 30 W Number of channels 2 Freq. Response (Analogue In) 20 Hz - 20 kHz Frequency Range FM 87.5 Mhz - 108.0 MHz The specs for the speakers are: Type 2-way, bass reflex Drivers "12cm bass-mid 2.5cm dome high" Impedance (ohms) 6 Frequency range 45 Hz - 40 kHz The speaker cables I am considering are: Audioquest FLX-SLiP 14/4 This cable got a 5 star review from WhatHiFi and was awarded product of the year for 2013. It would be $ 50 for two 10 foot runs terminated. Because I am not bi-wiring this cable would give me about an 11 AWG. Kimber Kable 4PR I can’t find any reviews from the big audio mags online, but it has been around for along time (1979?), and seems to be reasonably well regarded by the audio community. It would be $ 137 for two 10 foot runs terminated. Blue Jeans 5T00UP 10AWG I have only been able to find a review in Audioholics, but they seem to like it. Some people, on other audio forums like head-fi have also sung this cables praises. Also, I understand they supply the cables for a lot of pro applications like recording studios etc. It would be $ 80 for two 10 foot runs terminated. So what would you people suggest? What would give me the best bang for my buck for this little system give the 6 Ohm speakers and power output of the amp (30+30 wpc)? I am open to other suggestions for speaker cables too.
- 28 replies
-
- budget
- small system
-
(and 1 more)
Tagged with: