Jump to content


  • Content Count

  • Joined

  • Last visited

About jean-michel6

  • Rank

Personal Information

  • Location

Recent Profile Visitors

3601 profile views
  1. Hi Martin , Have you ever used a clock signal splitter to clock two devices with only one master clock . If yes what were the results ? Since you have moved now to two separate clock what is the benefit over the splitter ?
  2. Thank’s for your answers . There is also a device that can be used to split the signal with two output . There is a minor attenuation of signal strength . I was wondering if it is what you used and can give some feedback on sq . I will check with @martint
  3. Hi , I am also using an AD Giesemann clock for my etherregen . I am planning to add a Mutec mc3 usb to my system . Which device are you using to split the clock signal of you AD clock ? Have you any negative impact from using a such device ?
  4. In my case the music data goes this way local hdd (usb ) > x10sdv-f server > etherregen > ered dock player . I also play only local file and do not stream . The master clock is a huge progress because it delivers a very very noise free music data to the ereddock player . In your case you go from Nas > etherregen > I9 server & player . The master clock may be not an as significant experiment as what I did . Anyhow if you have the opprtunity I recommend you to test it.
  5. Hi Michael , I did like you 😂. Very interested by your results . I have not yet installed my Taiko ATX . I will initially power it with a SJ DC3 19 [email protected] . I am waiting on some feedback and may be I will use one of unregulated ps from Nenon . My server is a supermicro X10sdv-f ( Xeon 8 cores ar 2.1 MHz ) . This board is only fed through the atx there is no eps connector . I run only Daphile so no need for more horsepower . I have measured 4A at start up and about 3A during normal operations . Since you have an etherregen, I very very strongly recommend an externa
  6. I did tried before the double crown of my friend and it is also truly excellent at a much more reasonable cost .
  7. Since I was able to test an afterdark double crown master clock for my etherregen, I did purchased an emperor Giesemann clock from afterdark . This clock arrived a week ago and has been permanently powered for about 7 days . I had before the Chinese B7 clock , this clock gave a nice lift to sound quality . But the emperor Giesemann is really a small miracle . With this clock you don’t talk anymore about sound quality , the music comes in your room . It’s amazing what it does on voices . It just improve every parameter of the sound reproduction and it sounds s
  8. Any update . Looking forward to hear from you !
  9. One question , does anyone has tried this filter on the Chinese clock with square wave output . Since the square signal is so bad on these clocks may be the filter can still be an improvement .
  10. Thank’s , very interested in your tutorial on how to do it . Jean-Michel
  11. Hi G Thank’s for your detailed answer . I may try as you did since I would like also to try a nice spdif 75 ohms cable from my server to my dac . I will be also able to build a clock cable as you did . My self i already have the canare and the Apogee wide eye . What do you think of the tungstène bloc , did you use the 25mm ? In my opinion it is just a weight which dampens vibration . Crystal oscillator do not like vibrations . The power supply is always very important for the digital equipment , myself I am using a Sean jacobs psu to power this clock bu
  12. Have you compared your homemade Oyaide clock cable to any other cable ?
  13. A while ago I did some test using Daphile . I had an internal music ssd on sata and the same music library on an external hdd usb connected . I was buffering in ram the same piece of music coming from the ssd and from the hdd . The sound quality was different and always worse from the ssd !
  14. I was also in neotech copper ( heavy gauge ) , the mundorf is really a big sq lift over the neotech.
  15. I am in bed :-) .... but my system is running because I am burning in some mundorf cabling ( by the way this is also a true sq lift ! ) . If several of us are asking Kimmo , he may do it !
  • Create New...