Jump to content

MayfromSOtM

  • Content Count

    162
  • Joined

  • Last visited

  • Country

    Korea, Republic Of

Everything posted by MayfromSOtM

  1. Hi rickca, if I understand your question correctly, the optional sCLK-EX installation for sNH-10G means the sCLK-EX board will be installed into the sNH-10G. Thank you. Best regards, May
  2. hmmm difficult for me to explain in writing, but I can say Neo has deeper sound stage than the original one.
  3. Hi Tuning, If the Kernel checking is kept going on, it means somthing is not completed, how long it's going on? over 30mins? The better way what you can do is reburning Eunhasu to the micro sd card or to the new micro sd card again...can you try it?? Thank you~ Best regards, May
  4. Sorry that my answer got delayed, have you got the unit working back? About the settings, should check it according to DAC's specifications.. and it could be complicated.. Best regards, May
  5. You can power the unit to 12V, but 9V is our recommendation. Thank you~ Best regards, May
  6. The mixer type should be also changed to none or null.. Thank you~ Best regards, May
  7. Hi Tuning, "died" means you can't access to Eunhasu web gui or you can't see the light on the front panel or back panel of the LAN port? Thank you. Best regards, May
  8. Okay Tuning, now you will need to ask what DOP marker Yamaha is using, there are 0x05 / 0xFA markers and dcs marker. Please check it and let me know. Thank you. Best regards, May
  9. The DOP requires the max software volume. To do this, you can set the replay gain to none and mixer type to none or null. Pleaset try it with the setting let me know the result. Thank you. Best regards, May
  10. Just got this message, thank you Johnseys for your understanding. Best regards, May
  11. Sorry for the situaion being happend, but there seems extra explanation required for better understanding each other and it is not blaming to anyone, please don't argue about it. The test was done successffully, and we took video and pictures to make sure evertying works perfectly, and shared with Johnsesy, and indeed it worked perfectly fine but while assembling the board to the case, this connector got damaged, https://www.digikey.com/product-detail/en/hirose-electric-co-ltd/U.FL-R-SMT-1(01)/H122041-ND/3978494 so the connection can't be made flawlessly, and it is the reason the board would b
  12. Hello Tuning, Please adjust some settings in MPD config page on Eunhasu, http://docs.sotm-audio.com/doku.php?id=en/mpd Thank you. Best regars, May
  13. you figured out the connector got damaged somehow.. so it would take extra time and money indeed. Thank you. Best regards, May
  14. Oh!! I will check and correct the information thank you~
  15. No, I don't know where you've heard the price information but the price hasn't been finally confirmed( but assmed there would be no price differences??) will post later once the final test will be made. Thank you Best regars, May
  16. The Neo would have the different power board, so the sound also will be changed. From some moments, all sMS-200 would be released to be Neo version. I will confirm the details once NEO would be ready, it's still under testing at our end. Thank you~ Best regards, May
  17. Hi auricgoldfinger, IMHO, I think this result was made more related with the combination of the rest of your system which means it is not only a matter of dCBL-BNC. After adopting sCLK-OCX10 in your system, I believe the sound gets very much detailed and dedicated, so in this situation, more fine tunning is required according to this new system. So I would like to add some comments like replacing the power cable used for sCLK-OCX10 to get more fair comparison and better result in your system, for example, if you use the sPS-500 for the power supply, try to use the different
  18. No, I mean this feature is applied to our new switch, and still the iSO-CAT6 works in the position. Thank you~ Best regards May
  19. have not much infomation to share since I've already shared the information which I've known It will be 12V input and the sCLK-EX would be installed optionally and the audio grade filter feature will be used which has been used in iSO-CAT6. Thank you~ Best regards, May
  20. Hi AmusedToD, Not yet ready for the price information, so sorry, but yes, we are planning to show up the switch for the first time to coming AXPONA and Munich show!! Thank you! Best regards, May
  21. Hi, I would like to share the pictures how I've setup the sCLK-EX for UDP-203 and UDP-205, also I've built up the new power board for the digital input for UDP-205. The modification have been done impressively and if anyone would like to try out this modification, please email for more details and final quote. This is my email address: [email protected] Thank you. Best regards, May
  22. Yes, i will update the latest f/w on our server by today. Regarding to the issue you've reported, please follow the instruction below and report me back the result. 1. Run Eunhasu using chrome browser. 2. Press F12 key to check the console. 3. Activate MPD / DLNA feature on Eunhasu. 4. In the console window, verify that the message request timeout appears. If the request timeout appears, please go to MPD/DLNA config page on Eunahsu and uncheck "Library auto update". and try it out again./ Thank you. Best regards, May
  23. Hi octaviars, SOtM switch will have 8 LAN ports and 2 SFP ports, the sCLK-EX would be added as an option which means the master clock signal can be synced externally also.. Best regards, May
  24. Whoa, that's an honor really! Thank you for the positive result! Best regards, May
×
×
  • Create New...