Jump to content

ale76

  • Content Count

    34
  • Joined

  • Last visited

  • Country

    Italy

About ale76

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. HI, I have bought an Acrylic case to test the Digione signature on a RPI4. However, I get a very high temperature at 63.7℃ / 146.6℉ IS that normal?
  2. All done, thank you very much for your help!
  3. ahh...I see So I can detach the 2 boards? I thought the connectors were soldered
  4. Thank you @Audio_Allo I did use the spacer as you said, but that is not fixing the issue. the 1.1mm spacer seems too short and will not touch the main board. Also, even with the 12mm mounted onthe front side the nut is still touching the board. Anything else I can try?
  5. My apologies, I realized there is a section for cases I re-posted my question there
  6. I could easily mount the Digione Signature and it works like a charm, however I am facing some issues with the case. THe "Clean Power" plug on the case is at the same height of the DIgione card, and it prevents the case from sealing. Same issues for the "clean power" connector, which is at the same height of the Ground screw. Seems like the Digione should be lifted by 3/5 millimeters. I tried all the different screws and spacers, but no one seems to do the job, because they lift the Digione too much. Any suggestion ? Maybe I have a defective case?
  7. I received my Digione Signature and mounted on the USB Bridge using Ronn as a player (Roopie). It works, I can feed 2 different DACs simoultaneously, I see them as separate zones in Roon. The only issue I had is with the case, it is impossible for me to close it as the DIgione is touching the power plug. I have asked Allo directly to assist. Other than that, I can say I am enjoying more the sound from Digione Sig. rather than USB bridge sig., but I think that's due to the DAC I am using
  8. @Audio_Allo good morning, I ordered received the Digione Signature so I could mount it on my USB Bridge signature, and of course I ordered the case as well. I could easily mount the Digione Signature and it works like a charm, however I am facing some issues with the case. THe "Clean Power" plug on the case is at the same height of the DIgione card, and it prevents the case from sealing. Same issues for the "clean power" connector, which is at the same height of the Ground screw. Seems like the Digione should be lifted by 3/5 millimeters. I tried all t
  9. they get my highest recommendation if you are after something highly musical, I am really enjoying their products, and I think you can find great deals buying them used
  10. hi @Boleary3 I own the USB Bridge signature, great streamer as you said, and I am planning to add the Digione signature on top of that. The reason is opposite to yours , because I think My DAC (an old one) has a better coax implementation. That said, , I'd like to understand if the Bridge/DIgione combo can feed 2 separate DACs simultaneously, one through Coax and the other through USB. Have you tried that by any chance ? Maybe @Audio_Allo can help answering ? thanks ale
  11. Good morning everyone I am the happy owners of a Heed Obelisk DA which is stable in my main system since 2015. It is a very analog sounding DAC, and through the years I compared that to other converters such as the Code Qutest, Topping D90 and others, but I always preferred the Heed for its musicality. Now I bought its smaller brother, the Dactilus III, for my headphone set up and I am enjoying the house sound here as well. It replaced a SMSL SU9. Any one using Heed products on this forum ?
  12. Maybe.. I sent them 2 emails but I did not receive any feedback yet. What I received is something from HRA, the MusicScope analysis of the "Live in Gothenburg" album. According to their charts, there is some minimal content above 24khz. The same can be seen in the Sonic VIsualizer graph while Audacity and Spek do not show anything above that frequency
  13. @Musicophile my mistake, I meant “Live in Gothenburg” as per the screenshots and I purchased that on HRA
  14. @Teresa I did follow your guide and got this.. Is that a brick wall filter before 22khz? It's from a 24/96 album I bought, but if the analysis is right I am seeing a 320 kbps or a 16/44 FLAC if I am lucky... Am I right ?
×
×
  • Create New...