Citrus Posted September 21, 2022 Share Posted September 21, 2022 Hi AS Got the app on my ipad but dont know how to set it up? I have a single PC. Pretty much only use Qobuz. Does the remote work for navigating the Hqp Qobuz? Also are there keyboard short cuts. I know about the page numbers 1 2 & 3… mainly navigating through the client pages. Would be handy on the opening page to have a shortcut straight to get to local host. Then obviously press 1 the be able to go straight to the top box and choose Library. Qobuz or the other one. Would save a lot of time messing around with a mouse. The ‘Album’ link to page 1 is strangly very small and difficult to precisely get the mouse. Not sure why its so small? Thanks C Link to comment
ericuco Posted September 21, 2022 Share Posted September 21, 2022 Are you talking about HQP Client, HQPDcontrol or some other app? I don’t think that HQP Client is available on an iPad unless there has been a recent change. Eric Audio System Link to comment
Miska Posted September 21, 2022 Share Posted September 21, 2022 Keyboard shortcuts currently supported on HQPlayer Client: VolumeUp : volume up VolumeDown : volume down MediaPlay/MediaPlayPause/F8 : play/pause MediaStop/F6 : stop MediaPrevious/F7/Left : previous track MediaNext/F9/Right : next track MediaRewind : go back 10 seconds MediaForward : go forward 10 seconds MediaRandom : random playback MediaRepeat : repeat track/album (F10 : mute) F11/Down : volume down F12/Up : volume up F1/1 : album view (cover flow) F2/2 : play view F3/3 : playlist editor view Esc : cancel current operation Space : play/pause Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Citrus Posted September 22, 2022 Author Share Posted September 22, 2022 Thanks Miska Your always very helpful. Hi ericuco Im using Hqplayer client on a PC. Obviously host as well Trying to use the remote HQPD on ipad but cant connect it to PC. Trying to find out if the remote will work for Qobuz on client. Miska I know im probably being a pain in the arse! Cant really get my head round the limit/Apodizing filters? Im getting some numbers hitting 3-4000! Im presuming the ones with a X on the list are apodizing. Tried the reduce volume tactic but no effect. At the same time, I’m still enjoying the sound so is it really worth worrying about. NS5 with poly-sinc gause-long Using a parametric eq but there is nothing excessive, infact i have 25khz at -1.5db so no excessive bass. Any clues Thanks C Link to comment
ericuco Posted September 22, 2022 Share Posted September 22, 2022 2 hours ago, Citrus said: Trying to use the remote HQPD on ipad but cant connect it to PC. Do you have HQP set to allow control over the network? There is a button on the main HQP panel (last one on right) to allow this. Eric Audio System Link to comment
stefano_mbp Posted September 22, 2022 Share Posted September 22, 2022 2 hours ago, Citrus said: Im using Hqplayer client on a PC If it is a Windows pc check the Windows network type (in Network properties), it should be Private, not Public. If Public Windows firewall will reject any incoming connection. Stefano My audio system Link to comment
Citrus Posted September 22, 2022 Author Share Posted September 22, 2022 Fab guys Network was on private but these things need to be ticked of. The ‘allow control’ was the one. Never have worked that one out. Just to reassure my assumption, the remote wont operate the Qobuz option? (Annoyingly : ( Link to comment
Miska Posted September 22, 2022 Share Posted September 22, 2022 6 hours ago, Citrus said: Cant really get my head round the limit/Apodizing filters? Im getting some numbers hitting 3-4000! Im presuming the ones with a X on the list are apodizing. Tried the reduce volume tactic but no effect. At the same time, I’m still enjoying the sound so is it really worth worrying about. NS5 with poly-sinc gause-long Using a parametric eq but there is nothing excessive, infact i have 25khz at -1.5db so no excessive bass. Are you talking about the Limited number (first value) or the Apodizing number (second value)? Limited number is analyzed on the output side, and thus affected by volume control etc. Apodizing number is analyzed on the input (source) side and thus it applies to the source material and thus none of the settings will affect it because it is run directly on the source data before any DSP has been applied. Yes, the ones with X are apodizing filters. So if you get incrementing Limited count, lower the HQPlayer volume until it stays zero. If you get Apodizing count higher than 10 during a track, at least such tracks should be played through an apodizing filter. If you already have an apodizing filter selected, then you are already good. Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Citrus Posted September 22, 2022 Author Share Posted September 22, 2022 Thanks Miska That makes things more clear. Ill try both again. Im guessing a few tracks will have some high counts but if one has tried the above, but your still enjoying the music then not a problem. Could be that if there was no count displayed then one would not worry about it anyway! I will try the above though : ) Thanks C Link to comment
dericchan1 Posted March 30 Share Posted March 30 Hello I am reviving this old thread. Being a complete newbie in this, would like to seek the generous help/advice/instructions/guide on setting up a remote control for hqplayer client app. I am on windows 11. As I am now using hqplayer digital volume control now, it would be nice to have a physical control to at least to volume up/down/mute/play/stop… I saw Miska provided the keyboard keys above but again being a complete newbie I am not sure what I need to do to map the client app keys to a different physical remote, and it could just be a Bluetooth keypad or something . thanks everyone Deric Link to comment
dericchan1 Posted March 30 Share Posted March 30 https://a.co/d/34NRJZH I suppose something like the Flirc usb dongle will do? Link to comment
Popular Post Miska Posted March 30 Popular Post Share Posted March 30 4 hours ago, dericchan1 said: As I am now using hqplayer digital volume control now, it would be nice to have a physical control to at least to volume up/down/mute/play/stop… I saw Miska provided the keyboard keys above but again being a complete newbie I am not sure what I need to do to map the client app keys to a different physical remote, and it could just be a Bluetooth keypad or something . I purchased bunch of devices. This is so far one of the nice ones: 4 hours ago, dericchan1 said: I suppose something like the Flirc usb dongle will do? Possibly yes. dericchan1 and AudioDoctor 1 1 Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now