StreamFidelity Posted July 3, 2020 Share Posted July 3, 2020 1 hour ago, Blake said: Terminator Plus ordered. A good thing. We look forward to reports. 👍 Grigg Audio Solutions Owner StreamFidelitys Setup: Sonus Faber Amati Futura | T+A M10 | T+A SDV 3100 HV | fis Audio PC & Server | GigaWatt PC4-EVO+ | JCAT OPTIMO S ATX | FARAD Super10 & Super3 | Keces P8 | Afterdark Buffalo Switch | fis Audio Cables | Solidsteel HJ-3 / HY-A Link to comment
Popular Post StreamFidelity Posted August 24, 2020 Popular Post Share Posted August 24, 2020 The T+ has been playing for a few days. I only use USB via the JCAT USB XE Card from fis Audio PC. As part of my experiments with ReClocking, I found that SQ increased significantly with high-quality clocks in the signal path. The most important clock for me is the clock in the DAC. And here Denafrips seems to have invested well. Between the digital board (left) and the analog R2R board (right) there is a gap for galvanic isolation. Only the OCXO clock board connects both areas. The puristic approach of Denafrips suits me. Remote control? Volume control? Headphone output? There is none. 👍 So the T+ is not for everyone. The fewer functions there are, the less can break down or produce malfunctions. I solved the small range of functions very comfortably for myself. Although the pre-amplifier function is missing, I go directly to the T + A M10 power amplifiers via XLR. 4.4Vrms output voltage is easily sufficient for this. I control the volume digitally via the HQPlayer. With this quality there is no loss of resolution and the advantages of perfect channel separation, channel equality and noise suppression can be taken with you. I choose music through Roon. I bought it privately and have no business relationships with Denafrips richard_crl032, Blake and Exocer 3 Grigg Audio Solutions Owner StreamFidelitys Setup: Sonus Faber Amati Futura | T+A M10 | T+A SDV 3100 HV | fis Audio PC & Server | GigaWatt PC4-EVO+ | JCAT OPTIMO S ATX | FARAD Super10 & Super3 | Keces P8 | Afterdark Buffalo Switch | fis Audio Cables | Solidsteel HJ-3 / HY-A Link to comment
Popular Post StreamFidelity Posted August 24, 2020 Popular Post Share Posted August 24, 2020 2 minutes ago, richard_crl032 said: Additionally, I do like tube preamp to add a bit of "musicality" which is perhaps a bit old school but not ashame of it. I like it! This also works with power amplifiers. 😉 Cheers Gabriel richard_crl032 and Blake 2 Grigg Audio Solutions Owner StreamFidelitys Setup: Sonus Faber Amati Futura | T+A M10 | T+A SDV 3100 HV | fis Audio PC & Server | GigaWatt PC4-EVO+ | JCAT OPTIMO S ATX | FARAD Super10 & Super3 | Keces P8 | Afterdark Buffalo Switch | fis Audio Cables | Solidsteel HJ-3 / HY-A Link to comment
StreamFidelity Posted August 24, 2020 Share Posted August 24, 2020 14 minutes ago, luisma said: Have you tried the T+ without HQP in the chain? Hi Luis, I carried out various tests with and without HQP with my old Termi. NOS and OS, PCM and DSD. I kept coming back to the HQP ASDME7EC / DSD 256 and Termi in NOS. The algorithms of the HQPlayer are just too good. And I don't know any DAC with a computing power of 8 x 4.2GHz (i9-9900K overclocked). I can't do it without HQP because I don't have a preamplifier and I couldn't control the volume. But I will definitely try PCM again. Below is my signal path with Roon on NAS & HQP on fis Audio PC. Grigg Audio Solutions Owner StreamFidelitys Setup: Sonus Faber Amati Futura | T+A M10 | T+A SDV 3100 HV | fis Audio PC & Server | GigaWatt PC4-EVO+ | JCAT OPTIMO S ATX | FARAD Super10 & Super3 | Keces P8 | Afterdark Buffalo Switch | fis Audio Cables | Solidsteel HJ-3 / HY-A Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now