RubenV Posted January 19, 2020 Share Posted January 19, 2020 Hi! After buying AO3.0 I decided to upgrade my audio and control pc from ws2016 to ws2019. After installing the OS on both systems, update all the drivers and install HQPlayer together with NAA, I verified that everything worked properly, sound is coming out of the speakers. (Audio and control pc do not have a direct connection and use the same switch) However, after running AO on the audio pc to start with, HQPlayer can't see NAA so I can't select a device as backend under settings of HQPlayer. I tried to restore all settings and services, but still no sound. I have tried the ultimate mode with as less services disabled as possible but still no sound. I did a new windows installation, without AO and I had sound right away. After this I tried AO but this time on with the expert setting, and again no sound. I have done a lot of AO installations on my systems over the past year (WS2012, 2016 and now 2019) and never encountered any problems with AO. What am I missing? Mobile: iPhone 6s 128Gb > Chord Hugo > Shure 846 Stereo: PPA dual streamer setup with JPlay and AO > Lampizator Golden Gate SE > Classe Omega Preamp MKII > 2xNord On UP NC500DM > Linkwitz LX521 Link to comment
Popular Post RubenV Posted January 20, 2020 Author Popular Post Share Posted January 20, 2020 Problem solved, it appears you need to manually enable IPv6 again after running AO. Thanks @tboooe for pointing it out to me. AudioPhil and motberg 1 1 Mobile: iPhone 6s 128Gb > Chord Hugo > Shure 846 Stereo: PPA dual streamer setup with JPlay and AO > Lampizator Golden Gate SE > Classe Omega Preamp MKII > 2xNord On UP NC500DM > Linkwitz LX521 Link to comment
AudioPhil Posted January 20, 2020 Share Posted January 20, 2020 Hi Ruben Sorry for the late reply, but very glad you alread found the solution! btw, the change which caused this issue must have been within HQPlayer, not AO. Very best, AudioPhil ıllıllı [ ...AO 4.00 BETA... ] ıllıllı ____________________________________________________________________________________ Shop | Reviews | Reference System | AudiophileOptimizer 3.00 | PDF Guide Link to comment
Popular Post RubenV Posted January 20, 2020 Author Popular Post Share Posted January 20, 2020 4 hours ago, AudioPhil said: Hi Ruben Sorry for the late reply, but very glad you alread found the solution! btw, the change which caused this issue must have been within HQPlayer, not AO. Very best, AudioPhil Hi Phil, Thanks for replying I really enjoy the sound of AO3.0 together with ws2019, just fantastic. I only ran audiohpile optimizer and did not change anything in Hqplayer. After running AO and could not select the backend in HQplayer on IPv6 anymore, I enabled this through the registry. I don't know something else could have changed in the meantime while I did not alter any settings? After this edit I could select the proper back end in HQplayer and had sound with AO applied. Never had this kind of SQ in my system, so happy with it Edit: And I was able to compare it with both streamers connected to the switch, and the audio pc connected to the control pc (which has an extra intel gigabit nic) directly obtains a much better sound with my system. AudioPhil and motberg 1 1 Mobile: iPhone 6s 128Gb > Chord Hugo > Shure 846 Stereo: PPA dual streamer setup with JPlay and AO > Lampizator Golden Gate SE > Classe Omega Preamp MKII > 2xNord On UP NC500DM > Linkwitz LX521 Link to comment
AudioPhil Posted January 21, 2020 Share Posted January 21, 2020 Hey Ruben ...thanks a lot for the flowers! AO disables IPv6 since its first version from 2013, this never changed since then. But obviously HQPlayer seems now to be relying on IPv6 while it didn't in the past. will integrate this somehow for AO 3.10 including support for HQPlayer 4 👍🏼 very best, AudioPhil ıllıllı [ ...AO 4.00 BETA... ] ıllıllı ____________________________________________________________________________________ Shop | Reviews | Reference System | AudiophileOptimizer 3.00 | PDF Guide Link to comment
mourip Posted February 5, 2020 Share Posted February 5, 2020 On 1/20/2020 at 5:38 PM, RubenV said: Never had this kind of SQ in my system, so happy with it Ditto. Having recently gone to 2019 with AO v3 on my Roon Core server my system has never sounded better. (I have not tried HQP.) AudioPhil 1 "Don't Believe Everything You Think" System Link to comment
AudioPhil Posted February 5, 2020 Share Posted February 5, 2020 ...love to hear and read that! 😍 but why then has this topic such an awful thread title? 🙂 ıllıllı [ ...AO 4.00 BETA... ] ıllıllı ____________________________________________________________________________________ Shop | Reviews | Reference System | AudiophileOptimizer 3.00 | PDF Guide Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now