Jump to content
IGNORED

How can I set dop output for squeezelite?


Recommended Posts

I found that when playing dsd files, dac can only get PCM signals. Could I make it locked in dop mode when playing dsd?

 

Don't know if these lines can help.

root@DietPi:~# cat /proc/asound/card1/stream0

AUDIOBYTE BLACK DRAGON at usb-aotg_hcd.1-1.1, high speed : USB Audio

 

Playback:

  Status: Running

    Interface = 2

    Altset = 1

    Packet Size = 127

    Momentary freq = 95997 Hz (0xb.ffe4)

    Feedback Format = 16.16

  Interface 2

    Altset 1

    Format: S32_LE

    Channels: 2

    Endpoint: 5 OUT (ASYNC)

    Rates: 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000

    Data packet interval: 125 us

 

And if I use ssh to tap in "squeezelite -D", system returns nothing, seeming like stuck.

Link to comment
12 hours ago, JoyBurrito said:

I found that when playing dsd files, dac can only get PCM signals. Could I make it locked in dop mode when playing dsd?

 

Don't know if these lines can help.

root@DietPi:~# cat /proc/asound/card1/stream0

AUDIOBYTE BLACK DRAGON at usb-aotg_hcd.1-1.1, high speed : USB Audio

 

Playback:

  Status: Running

    Interface = 2

    Altset = 1

    Packet Size = 127

    Momentary freq = 95997 Hz (0xb.ffe4)

    Feedback Format = 16.16

  Interface 2

    Altset 1

    Format: S32_LE

    Channels: 2

    Endpoint: 5 OUT (ASYNC)

    Rates: 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000

    Data packet interval: 125 us

 

And if I use ssh to tap in "squeezelite -D", system returns nothing, seeming like stuck.

 

As per your cat /proc/asound/card1/stream0  output ,Your DAC is not supporting DSD Native in linux.

 

You can configure output as dop mode and set volume 100% and check

 

image.thumb.png.58b3b1d1f68b9e5ba922b16fb7bc7bed.png

 

 

Link to comment
41 minutes ago, Audio_Allo said:

 

As per your cat /proc/asound/card1/stream0  output ,Your DAC is not supporting DSD Native in linux.

 

You can configure output as dop mode and set volume 100% and check

 

image.thumb.png.58b3b1d1f68b9e5ba922b16fb7bc7bed.png

 

 

No, in the configure page I can only set between "disable" and "native".

As for in latest 6.26 system edition, Allo web guide page can not be opened, so I can only use 6.18 edition for these settings.

And when I try update, I noticed there appears some errors and shows terminated at last rather than reboot.

Screenshot_20191121-182034.png

Screenshot_20191121-182325.png

Screenshot_20191121-183027.png

Screenshot_20191121-183345.png

Screenshot_20191121-183345.png

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...