Zauurx Posted May 8, 2020 Share Posted May 8, 2020 The same for me. Last version, last kernel and last driver. 87mpi 1 ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
shang_2000 Posted May 9, 2020 Share Posted May 9, 2020 21 hours ago, ambre said: Can you Please sent the solution proposed by Allo by mail. A while ago i have had same problems with RME adi 2 and the Usbridge signature. At that moment ( Jan 2020) no fix available. Reason to sent back the RME. Best regards, Andreas i use gentooplayer ,adi2 fs,allo usbridge signature ,Play dsd256 perfectly over roonbridge and squeezelite! Please install gentooplayer 2.13 for allo usbridge signature ,Please use 114 non-rt kernel!114 kernel in 2.13 has added the latest network card driver 87mpi 1 Link to comment
87mpi Posted May 9, 2020 Share Posted May 9, 2020 I apologize, I was wrong to post Doepke DFS2/ Gigawatt C16A + 044/ Lc-y Evo/ LC3-EVO /LC2-Evo/ LC-3 MK3/ Toroidy DC Blocker/ Hdplex H5 / Windows 10 Pro1903 AO3 + Fidelizer Pro 8.10/ JPLAY Femto/ Crosshair VIII Dark Hero/ Ryzen 9 5950X/ Optane P1600X/ Apacer 2x4GB DDR4 ECC 2666/ Jcat Usb XE/ Jcat Net XE /Audiowise Opto USB/ Sablon USB Evo/ 2x Paul Hynes SR4T for Jcat / 2x Baaske NET Isolator MI 1005/ Ethernet cable Viablue EP-7S/ Sablon Ethernet 2020 /Fidelizer StreamHub/ All Dc cables Neotech Occ JSSG360 /Hdplex 500W DC ATX/ Holo Spring 3 KTE/ Audio Research LS5 (4x E188CC Red Label/ 4x RCA 12BH7A Black Plates/ 2X Brimar 12BH7 Black Plates)/ Proceed HPA2 (Mark Levinson 432)/ Scansonic MB 3.5B + Iso Acoustics Gaia III / Townshend Isolda EDCT/ 2x Townshend DCT 300 XLR/ Synergistic Research Purple Fuses In Hdplex, 2x SR4T, Preamp, Dac/ 4X Townshend Seismic Pods Link to comment
87mpi Posted May 9, 2020 Share Posted May 9, 2020 57 minutes ago, shang_2000 said: i use gentooplayer ,adi2 fs,allo usbridge signature ,Play dsd256 perfectly over roonbridge and squeezelite! Please install gentooplayer 2.13 for allo usbridge signature ,Please use 114 non-rt kernel!114 kernel in 2.13 has added the latest network card driver Thank you so much for your answer. I knew that the GP developer @antonellocaroli had inserted the asix V2.0 driver. I tried but unfortunately the problem is still there .. Which version of adi-2 do you have? The new version with akm 4493? Mine is the old one. I will try again with the version you recommended Thanks Antonio Doepke DFS2/ Gigawatt C16A + 044/ Lc-y Evo/ LC3-EVO /LC2-Evo/ LC-3 MK3/ Toroidy DC Blocker/ Hdplex H5 / Windows 10 Pro1903 AO3 + Fidelizer Pro 8.10/ JPLAY Femto/ Crosshair VIII Dark Hero/ Ryzen 9 5950X/ Optane P1600X/ Apacer 2x4GB DDR4 ECC 2666/ Jcat Usb XE/ Jcat Net XE /Audiowise Opto USB/ Sablon USB Evo/ 2x Paul Hynes SR4T for Jcat / 2x Baaske NET Isolator MI 1005/ Ethernet cable Viablue EP-7S/ Sablon Ethernet 2020 /Fidelizer StreamHub/ All Dc cables Neotech Occ JSSG360 /Hdplex 500W DC ATX/ Holo Spring 3 KTE/ Audio Research LS5 (4x E188CC Red Label/ 4x RCA 12BH7A Black Plates/ 2X Brimar 12BH7 Black Plates)/ Proceed HPA2 (Mark Levinson 432)/ Scansonic MB 3.5B + Iso Acoustics Gaia III / Townshend Isolda EDCT/ 2x Townshend DCT 300 XLR/ Synergistic Research Purple Fuses In Hdplex, 2x SR4T, Preamp, Dac/ 4X Townshend Seismic Pods Link to comment
shang_2000 Posted May 9, 2020 Share Posted May 9, 2020 16 minutes ago, 87mpi said: Thank you so much for your answer. I knew that the GP developer @antonellocaroli had inserted the asix V2.0 driver. I tried but unfortunately the problem is still there .. Which version of adi-2 do you have? The new version with akm 4493? Mine is the old one. I will try again with the version you recommended Thanks Antonio yes my is 4493 87mpi 1 Link to comment
Zauurx Posted May 9, 2020 Share Posted May 9, 2020 8 hours ago, shang_2000 said: i use gentooplayer ,adi2 fs,allo usbridge signature ,Play dsd256 perfectly over roonbridge and squeezelite! Please install gentooplayer 2.13 for allo usbridge signature ,Please use 114 non-rt kernel!114 kernel in 2.13 has added the latest network card driver 4.14.114-060120 and what version V14-min ? ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
87mpi Posted May 9, 2020 Share Posted May 9, 2020 13 minutes ago, Zauurx said: 4.14.114-060120 and what version V14-min ? @Audio_Allo I've used 4.14.114-010320, Gentooplayer-ST (n° 20) This finally resolve the problem😊😊😊 My Dac il the old one (4490) Special thanks to @shang_2000 @antonellocaroli 🙏🙏🙏🙏🙏🙏 Doepke DFS2/ Gigawatt C16A + 044/ Lc-y Evo/ LC3-EVO /LC2-Evo/ LC-3 MK3/ Toroidy DC Blocker/ Hdplex H5 / Windows 10 Pro1903 AO3 + Fidelizer Pro 8.10/ JPLAY Femto/ Crosshair VIII Dark Hero/ Ryzen 9 5950X/ Optane P1600X/ Apacer 2x4GB DDR4 ECC 2666/ Jcat Usb XE/ Jcat Net XE /Audiowise Opto USB/ Sablon USB Evo/ 2x Paul Hynes SR4T for Jcat / 2x Baaske NET Isolator MI 1005/ Ethernet cable Viablue EP-7S/ Sablon Ethernet 2020 /Fidelizer StreamHub/ All Dc cables Neotech Occ JSSG360 /Hdplex 500W DC ATX/ Holo Spring 3 KTE/ Audio Research LS5 (4x E188CC Red Label/ 4x RCA 12BH7A Black Plates/ 2X Brimar 12BH7 Black Plates)/ Proceed HPA2 (Mark Levinson 432)/ Scansonic MB 3.5B + Iso Acoustics Gaia III / Townshend Isolda EDCT/ 2x Townshend DCT 300 XLR/ Synergistic Research Purple Fuses In Hdplex, 2x SR4T, Preamp, Dac/ 4X Townshend Seismic Pods Link to comment
ambre Posted May 10, 2020 Share Posted May 10, 2020 On 5/8/2020 at 6:03 PM, ambre said: Can you Please sent the solution proposed by Allo by mail. A while ago i have had same problems with RME adi 2 and the Usbridge signature. At that moment ( Jan 2020) no fix available. Reason to sent back the RME. So far I know Gentoo doesn't support HQPlayer ? Tried that in past too but could not install it and access by SSH etc..... Best regards, Andreas I am using HQ player NAA on DietPi (recent version) on Allo USBridge Sig controlled by several Apple Macs. Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
ambre Posted May 10, 2020 Share Posted May 10, 2020 On 5/8/2020 at 2:51 PM, Audio_Allo said: Forwarded PM please check 87 MPI, What told Allo you concerning your question resp. issue? Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
87mpi Posted May 10, 2020 Share Posted May 10, 2020 20 minutes ago, ambre said: 87 MPI, What told Allo you concerning your question resp. issue? This is the latest message Allo sent me: "we will discuss with our team and update you" BTW try again to use GentooPlayer as we wrote above. I think it will solve your problem. Let we know Antonio Doepke DFS2/ Gigawatt C16A + 044/ Lc-y Evo/ LC3-EVO /LC2-Evo/ LC-3 MK3/ Toroidy DC Blocker/ Hdplex H5 / Windows 10 Pro1903 AO3 + Fidelizer Pro 8.10/ JPLAY Femto/ Crosshair VIII Dark Hero/ Ryzen 9 5950X/ Optane P1600X/ Apacer 2x4GB DDR4 ECC 2666/ Jcat Usb XE/ Jcat Net XE /Audiowise Opto USB/ Sablon USB Evo/ 2x Paul Hynes SR4T for Jcat / 2x Baaske NET Isolator MI 1005/ Ethernet cable Viablue EP-7S/ Sablon Ethernet 2020 /Fidelizer StreamHub/ All Dc cables Neotech Occ JSSG360 /Hdplex 500W DC ATX/ Holo Spring 3 KTE/ Audio Research LS5 (4x E188CC Red Label/ 4x RCA 12BH7A Black Plates/ 2X Brimar 12BH7 Black Plates)/ Proceed HPA2 (Mark Levinson 432)/ Scansonic MB 3.5B + Iso Acoustics Gaia III / Townshend Isolda EDCT/ 2x Townshend DCT 300 XLR/ Synergistic Research Purple Fuses In Hdplex, 2x SR4T, Preamp, Dac/ 4X Townshend Seismic Pods Link to comment
ambre Posted May 10, 2020 Share Posted May 10, 2020 1 hour ago, 87mpi said: This is the latest message Allo sent me: "we will discuss with our team and update you" BTW try again to use GentooPlayer as we wrote above. I think it will solve your problem. Let we know Antonio I am using HqPlayer for Dsd upsampling. Need the NAA functionality of DIETPI Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
pl_svn Posted May 10, 2020 Share Posted May 10, 2020 13 minutes ago, ambre said: Need the NAA functionality of DIETPI RoPieee XL Qnap HS-264 NAS (powered by an HD-Plex 100w LPS) > Cirrus7 Nimbini v2.5 Media Edition i7-8559U/32/512 running Roon ROCK (powered by a Keces P8 LPS) > Lumin U2 > Metrum Acoustics Adagio NOS digital preamplifier > First Watt SIT 3 power amplifier (or Don Garber Fi "Y" 6922 tube preamplifier + Don Garber Fi "X" 2A3 SET power amplifier, both powered from an Alpha-Core BP-30 Isolated Symmetrical Power Transformer) > Klipsch Cornwall III headphones system: Cirrus 7 > Lumin U2 > Metrum Acoustics Adagio > Pathos Aurium amplifier (powered by an UpTone Audio JS-2 LPS) > Focal Clear headphones Link to comment
Zauurx Posted May 10, 2020 Share Posted May 10, 2020 12 hours ago, 87mpi said: @Audio_Allo I've used 4.14.114-010320, Gentooplayer-ST (n° 20) This finally resolve the problem😊😊😊 Not for me 🙄 But with last RopieeeXL is good (some lack at DSD256 but rarely) (4.19.118-1-SPCKFSH-v7 kernel) ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
87mpi Posted May 10, 2020 Share Posted May 10, 2020 18 minutes ago, ambre said: I am using HqPlayer for Dsd upsampling. Need the NAA functionality of DIETPI Gentooplayer has several network audio players already installed that you can enabled or disabled, including NAA, Roon Bridge, Squeezelite etc.. Doepke DFS2/ Gigawatt C16A + 044/ Lc-y Evo/ LC3-EVO /LC2-Evo/ LC-3 MK3/ Toroidy DC Blocker/ Hdplex H5 / Windows 10 Pro1903 AO3 + Fidelizer Pro 8.10/ JPLAY Femto/ Crosshair VIII Dark Hero/ Ryzen 9 5950X/ Optane P1600X/ Apacer 2x4GB DDR4 ECC 2666/ Jcat Usb XE/ Jcat Net XE /Audiowise Opto USB/ Sablon USB Evo/ 2x Paul Hynes SR4T for Jcat / 2x Baaske NET Isolator MI 1005/ Ethernet cable Viablue EP-7S/ Sablon Ethernet 2020 /Fidelizer StreamHub/ All Dc cables Neotech Occ JSSG360 /Hdplex 500W DC ATX/ Holo Spring 3 KTE/ Audio Research LS5 (4x E188CC Red Label/ 4x RCA 12BH7A Black Plates/ 2X Brimar 12BH7 Black Plates)/ Proceed HPA2 (Mark Levinson 432)/ Scansonic MB 3.5B + Iso Acoustics Gaia III / Townshend Isolda EDCT/ 2x Townshend DCT 300 XLR/ Synergistic Research Purple Fuses In Hdplex, 2x SR4T, Preamp, Dac/ 4X Townshend Seismic Pods Link to comment
87mpi Posted May 10, 2020 Share Posted May 10, 2020 18 minutes ago, Zauurx said: Not for me 🙄 But with last RopieeeXL is good (some lack at DSD256 but rarely) (4.19.118-1-SPCKFSH-v7 kernel) I am sorry to hear that this did not solve your problem 🙄 For me it was the only working combination with zero drops. I had the same little problem (some micro drops at dsd 256) with dietpi allo gui, both 4.14 and 4.19 kernel based versions with new asix driver. Doepke DFS2/ Gigawatt C16A + 044/ Lc-y Evo/ LC3-EVO /LC2-Evo/ LC-3 MK3/ Toroidy DC Blocker/ Hdplex H5 / Windows 10 Pro1903 AO3 + Fidelizer Pro 8.10/ JPLAY Femto/ Crosshair VIII Dark Hero/ Ryzen 9 5950X/ Optane P1600X/ Apacer 2x4GB DDR4 ECC 2666/ Jcat Usb XE/ Jcat Net XE /Audiowise Opto USB/ Sablon USB Evo/ 2x Paul Hynes SR4T for Jcat / 2x Baaske NET Isolator MI 1005/ Ethernet cable Viablue EP-7S/ Sablon Ethernet 2020 /Fidelizer StreamHub/ All Dc cables Neotech Occ JSSG360 /Hdplex 500W DC ATX/ Holo Spring 3 KTE/ Audio Research LS5 (4x E188CC Red Label/ 4x RCA 12BH7A Black Plates/ 2X Brimar 12BH7 Black Plates)/ Proceed HPA2 (Mark Levinson 432)/ Scansonic MB 3.5B + Iso Acoustics Gaia III / Townshend Isolda EDCT/ 2x Townshend DCT 300 XLR/ Synergistic Research Purple Fuses In Hdplex, 2x SR4T, Preamp, Dac/ 4X Townshend Seismic Pods Link to comment
ambre Posted May 11, 2020 Share Posted May 11, 2020 On 5/10/2020 at 1:18 PM, pl_svn said: RoPieee XL So far I have seen on webpage the Allo UsBridge Signature isn’t on the list of supporteD hardware of RopieeXL. Or am I misstaken? Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
87mpi Posted May 11, 2020 Share Posted May 11, 2020 26 minutes ago, ambre said: So far I have seen on webpage the Allo UsBridge Signature isn’t on the list of supporteD hardware of RopieeXL. Or am I misstaken? I've tried XL. It works fine, but it didn't solve the dsd problem, for me Doepke DFS2/ Gigawatt C16A + 044/ Lc-y Evo/ LC3-EVO /LC2-Evo/ LC-3 MK3/ Toroidy DC Blocker/ Hdplex H5 / Windows 10 Pro1903 AO3 + Fidelizer Pro 8.10/ JPLAY Femto/ Crosshair VIII Dark Hero/ Ryzen 9 5950X/ Optane P1600X/ Apacer 2x4GB DDR4 ECC 2666/ Jcat Usb XE/ Jcat Net XE /Audiowise Opto USB/ Sablon USB Evo/ 2x Paul Hynes SR4T for Jcat / 2x Baaske NET Isolator MI 1005/ Ethernet cable Viablue EP-7S/ Sablon Ethernet 2020 /Fidelizer StreamHub/ All Dc cables Neotech Occ JSSG360 /Hdplex 500W DC ATX/ Holo Spring 3 KTE/ Audio Research LS5 (4x E188CC Red Label/ 4x RCA 12BH7A Black Plates/ 2X Brimar 12BH7 Black Plates)/ Proceed HPA2 (Mark Levinson 432)/ Scansonic MB 3.5B + Iso Acoustics Gaia III / Townshend Isolda EDCT/ 2x Townshend DCT 300 XLR/ Synergistic Research Purple Fuses In Hdplex, 2x SR4T, Preamp, Dac/ 4X Townshend Seismic Pods Link to comment
pl_svn Posted May 12, 2020 Share Posted May 12, 2020 9 hours ago, ambre said: So far I have seen on webpage the Allo UsBridge Signature isn’t on the list of supporteD hardware of RopieeXL. Or am I misstaken? running here on my USBridge Sig Harry (the developer) might be "a little" behind in updating the website Qnap HS-264 NAS (powered by an HD-Plex 100w LPS) > Cirrus7 Nimbini v2.5 Media Edition i7-8559U/32/512 running Roon ROCK (powered by a Keces P8 LPS) > Lumin U2 > Metrum Acoustics Adagio NOS digital preamplifier > First Watt SIT 3 power amplifier (or Don Garber Fi "Y" 6922 tube preamplifier + Don Garber Fi "X" 2A3 SET power amplifier, both powered from an Alpha-Core BP-30 Isolated Symmetrical Power Transformer) > Klipsch Cornwall III headphones system: Cirrus 7 > Lumin U2 > Metrum Acoustics Adagio > Pathos Aurium amplifier (powered by an UpTone Audio JS-2 LPS) > Focal Clear headphones Link to comment
ambre Posted May 12, 2020 Share Posted May 12, 2020 10 hours ago, 87mpi said: I've tried XL. It works fine, but it didn't solve the dsd problem, for me Thanks, I am hearing also micro drops at Dsd 256 and using Hqplayer and Topping 90 in direct mode. But noticed this after i have installed a power improvement done by Isotek Some kind of Dc filtering resp.clean power, This brings a lot of improvement but now I hear some clicks like the old vinyl tic. Tried at Dsd 512 but didn’t hear these pops. Will do some testing with and without Isotek Power adapter and Dsd 256<=> 512. As soon as you hear something from Allo please pm. Best regards, Andreas. Just read that you already tried GenToo Player without result. Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
Zauurx Posted May 12, 2020 Share Posted May 12, 2020 blanks or dropouts are problems with ethernet driver (i think) but for clicks, you can change buffer settings in HQP (>100ms). Try I have an HDPlex > NUC an RME (+ iFi DC iPurifier) ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
ambre Posted May 12, 2020 Share Posted May 12, 2020 2 hours ago, Zauurx said: blanks or dropouts are problems with ethernet driver (i think) but for clicks, you can change buffer settings in HQP (>100ms). Try I have an HDPlex > NUC an RME (+ iFi DC iPurifier) Hi ZAUURX and 87mpi, which version of HQ-player are you using? I switched in weekend to latest 4.4.1. .....is the root cause maybe HQP? Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
ambre Posted May 12, 2020 Share Posted May 12, 2020 Just now, ambre said: Hi ZAUURX and 87mpi, which version of HQ-player are you using? I switched in weekend to latest 4.4.1. .....is the root cause maybe HQP? Sorry version 4.4.0 Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
ambre Posted May 12, 2020 Share Posted May 12, 2020 Just saw that version 4.5.0 is available from 10-05 onwards😚 Quote Ethernet::4x Bonn Silent Angel 8P, Afterdark Emperor Doublr Crown Masterclock and Cybershaft 75 Ohm,Mini Circuits convertor,Uptone EtherRegen with 75Ohm. SOTM Cat CAT 7. Audio: Auralic Vega G2.1, Cambridge Edge W, Kef Reference 3 speakers. Power: Farad super 3 (2x) , Keces P8 ( 2 Uptone LPS1.2 ) Afterdark 5V: Cables:Meicord Opal, SOTM Cat7 with filtering, Ghent Audio DC , Farad Level 2, Sharkwire speaker cable Link to comment
Zauurx Posted May 13, 2020 Share Posted May 13, 2020 @matthias Allo offers a version of Dietpi with the Asix ethernet driver in version V2 for Dietpi 6.26.http://3.230.113.73:9011/Allocom/DietPi/DietPi_v6.26m1_RPi-ARMv7-Stretch_AlloGUI.img.7z But if I update to 6.26 >> 6.29 or 6.30, the driver 2.0 goes back to 0.1.4 (?) (kernel 4.19.73) I think, 6.26m1 is a local compiled version.. Please can you update to 6.30 ? ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
Audio_Allo Posted May 13, 2020 Share Posted May 13, 2020 1 hour ago, Zauurx said: @matthias Allo offers a version of Dietpi with the Asix ethernet driver in version V2 for Dietpi 6.26.http://3.230.113.73:9011/Allocom/DietPi/DietPi_v6.26m1_RPi-ARMv7-Stretch_AlloGUI.img.7z But if I update to 6.26 >> 6.29 or 6.30, the driver 2.0 goes back to 0.1.4 (?) (kernel 4.19.73) I think, 6.26m1 is a local compiled version.. Please can you update to 6.30 ? Forwarded PM please check Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now