Jump to content
sockpit

Rendu Support Thread

Rate this topic

Recommended Posts

So I had a power outage but got all powered up again but I cant get connectivity from my uptone LPS1.2 powered microRendu to my dac. Tried     cycling my pc,      dac, roon and nogo. Any ideas?

Share this post


Link to post
Share on other sites

I'm assuming that the microRendu is visible on the network. Try disconnecting the USB cable from both mR and DAC.Turn off DAC, reconnect USB cable and restart DAC.


(MPD/Soundirok), Sonore ultraRendu, Sonore ultraDigital, Ayre QX-5 Twenty, Ayre KX-5 Twenty, Ayre VX-5 Twenty, Revel Ultima Studio2, RealTraps acoustic treatments

Share this post


Link to post
Share on other sites
1 hour ago, Theobetley said:

So I had a power outage but got all powered up again but I cant get connectivity from my uptone LPS1.2 powered microRendu to my dac. Tried     cycling my pc,      dac, roon and nogo. Any ideas?

Make sure your Dac is powered up and the LPS-1.2 has a green LED before you power up the mRendu, in other words don’t connect the output of the 1.2 to the mR until it’s power led is solid green. Hope that helps.

Mke


Bryston BP-26 Preamp, BDA-3 Dac, 4B Cubed Amp, Sonore oRendu powered by a Sonore Ultra PS,, Sonore oModule powered by a Uptone Audio LPS-1.2, YFS configured 2012 Mac Mini, YFS PS for Mini, Clearaudio Champion TT Level 1, JLTI Phono Stage, Totem Mani-2 Speakers, Audio Magic Interconnects, Speaker and Power Cables, Lush USB cable from oRendu to BDA-3 DAC and Audioquest Ethernet Cables. PI Audio Battery Buss powering 2 FireWire Hard Drives.  Herbies Audio Labs and Audio Magic accessories. I also have a Uptone Audio ISO regen powered by a Uptone LPS-1.2 that is presently out of the loop for now pending feedback from others with the Sonore Optical products as well as my own listening.

Share this post


Link to post
Share on other sites

I'm having trouble getting Squeezelite on my microRendu to play files with greater resolution than 96/24. It's feeding into a Schiit Gugnir dac, which definitely goes up to 192, and I tested it by playing a 192 file through Jriver and the DLNA app, which works fine. But when I try to play anything >96 through Squeezelite (preferred over Jriver), the microRendu goes a little nuts -- no sound, and it stops responding to commands through the LMS web interface. (96 files sound great, btw.) I have to reboot the microRendu and sometimes unplug to regain control. These are all Flac files, the LMS setting is Flac native, and the LMS is on a Mac Mini connected by ethernet. Thanks for any advice. 

Share this post


Link to post
Share on other sites

I have an UltraRendu with an LPS-1 that streams into a PS Audio Gain Cell DAC. I use Bubble DS on my Android to control MinimServer and my music files via an Acer laptop. This setup has been working flawlessly for over a year; today it stopped playing DSD files, just some low level noise is output. I've checked every option, and can get DSD playback from everything except the UltraRendu. Anyone else experiencing any issues?

 

I've rebooted, reinstalled the software, unplugged and replugged every connection. I can get DSD into the Gain Cell DAC from a couple of different setups, so I'm pretty sure that it's not the problem.

 

Tom

Share this post


Link to post
Share on other sites

I have two issues I could could use some help with. I updated the software tonight on my MicroRendu (1.4) and now Lumin cannot find it at all. 

 

Secondly, the reason I updated the software was that I wanted to use the Shairware app and when I went to apps, it did not appear. It's also still not appearing after the software update. Any help would be appreciated. Thanks.

 

JC

 

Share this post


Link to post
Share on other sites
On 9/27/2018 at 1:56 AM, TubeLover said:

I have two issues I could could use some help with. I updated the software tonight on my MicroRendu (1.4) and now Lumin cannot find it at all. 

 

Secondly, the reason I updated the software was that I wanted to use the Shairware app and when I went to apps, it did not appear. It's also still not appearing after the software update. Any help would be appreciated. Thanks.

 

JC

 

Go to Settings / MPD DLNA and select the LUMIN check box and press Save.

 

Shairport is user installed from Apps / Software Manager. 

Share this post


Link to post
Share on other sites
17 hours ago, vortecjr said:

Go to Settings / MPD DLNA and select the LUMIN check box and press Save.

 

Shairport is user installed from Apps / Software Manager. 

Thanks Jesus, but when I do ask you suggest, all I get is this (and where it says Audio Device = USB output) and there is no Lumin box to check):

 

MPD / DLNA Renderer Settings

Player Name

Player name (leave blank for auto)

Audio Device

This audio device will be used for this player

Enable Direct DSD support
This will enable Direct DSD to your DAC instead of DoP. Your DAC must support Direct DSD to use this feature.
Save changes 

Share this post


Link to post
Share on other sites
On 9/20/2018 at 10:27 PM, Tom Gibbs said:

I have an UltraRendu with an LPS-1 that streams into a PS Audio Gain Cell DAC. I use Bubble DS on my Android to control MinimServer and my music files via an Acer laptop. This setup has been working flawlessly for over a year; today it stopped playing DSD files, just some low level noise is output. I've checked every option, and can get DSD playback from everything except the UltraRendu. Anyone else experiencing any issues?

 

I've rebooted, reinstalled the software, unplugged and replugged every connection. I can get DSD into the Gain Cell DAC from a couple of different setups, so I'm pretty sure that it's not the problem.

 

Tom

We have an update coming next week that "might" help. 

Share this post


Link to post
Share on other sites
3 hours ago, vortecjr said:

I assumed you had an updated unit. This may indicate a network issue. Press Save anyways. 

I 'm confused. My unit was upgraded to 1.4 by Small Green Computer a while ago, and I just recently updated it to the latest software. What update is it lacking?

 

Also, I did press save, and the unit rebooted, but nothing has changed. Here is the current page, which does not seem to indicate any network issues?

 

Music Servers 0

No Sonicorbiter OS based music servers found on your network.

Network players 1

Version: 2.6
Model: microRendu
IP Address: 192.168.1.142
MAC: D0:63:B4:00:EC:E7

 

 

How do I get Lumin to work again? I've been unable to listen to music for more than three days. Thanks for your assistance.

 

JC

Share this post


Link to post
Share on other sites
4 hours ago, TubeLover said:

I 'm confused. My unit was upgraded to 1.4 by Small Green Computer a while ago, and I just recently updated it to the latest software. What update is it lacking?

 

Also, I did press save, and the unit rebooted, but nothing has changed. Here is the current page, which does not seem to indicate any network issues?

 

How do I get Lumin to work again? I've been unable to listen to music for more than three days. Thanks for your assistance.

 

JC

The 1.4 update was for hardware and not software.

Just in case go to Apps / Software Manager and Update the unit.

Then go to Settings / MPD DLNA and check off the Lumin box and press Save. 

Share this post


Link to post
Share on other sites
20 minutes ago, vortecjr said:

The 1.4 update was for hardware and not software.

Just in case go to Apps / Software Manager and Update the unit.

Then go to Settings / MPD DLNA and check off the Lumin box and press Save. 

Thank you again, but I just updated to 2.6 the other night. Software manager tells me that is the current version. I lost the ability for Lumin to see the MicroRendu after that update completed and the unit rebooted.

 

JC.  

Share this post


Link to post
Share on other sites

I’m having issues with my ultraRendu.

 

- I only get the green status like 80% of the time on power up. The other times is stays amber

- on the sonicorbiter.com web page it says my uR is connected even when it’s powered off

- I currently have the green status slight but I can’t access the user interface of the uR. 

 

Any suggestins?


2014 Mac Mini -> (LPS-1.2) ultraRendu -> (LPS4) 20G -> (LPS-1.2) SU-1 -> Spring KTE -> KGGG -> SR-L700
Debut Carbon DC -> Freya -> Stealth 8

Share this post


Link to post
Share on other sites

Any reason why it cannot be accessed through the sonicorbiter.com page “manage” button?


2014 Mac Mini -> (LPS-1.2) ultraRendu -> (LPS4) 20G -> (LPS-1.2) SU-1 -> Spring KTE -> KGGG -> SR-L700
Debut Carbon DC -> Freya -> Stealth 8

Share this post


Link to post
Share on other sites

I don’t think network errors are the problem because nothing else on the network is having an issue. What the easiest way to get the the OS reloaded on the SD card?


2014 Mac Mini -> (LPS-1.2) ultraRendu -> (LPS4) 20G -> (LPS-1.2) SU-1 -> Spring KTE -> KGGG -> SR-L700
Debut Carbon DC -> Freya -> Stealth 8

Share this post


Link to post
Share on other sites
4 minutes ago, oneguy said:

I don’t think network errors are the problem because nothing else on the network is having an issue. What the easiest way to get the the OS reloaded on the SD card?

We sell replacement SD cards on our website.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...