Branko Posted June 22, 2020 Share Posted June 22, 2020 1 hour ago, Branko said: Hello, been using GP on a BBB with Room-Bridge for a while without Problems. Antonello helped me with installation of shairport-sync a lot. layer is But after being away for some days my BBB-Player is n to showing up anymore in Room. Only the ShairportSync on this Player is working. After running gp-update and update to roonbridge it showed up again. but after reboot it is gone? tried to restart roonbridge under gp-menu a few timed and it showed again. but Musik stopped after some seconds an player was not recognized in Room anymore (only sharport-sync is showing an working via airplay) What to try? Branko This is Syteminfo; rc-status; ifconfig: _____ _ _____ _ / ____| | | | __ \| | | | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __ | | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__| | |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ | \_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_| __/ | |___/ Profile: Profile not Setting RamSystem: Ramsystem not enabled Free memory: 422MB of total 497MB Kernel: 4.8.13-GentooPlayer-ST-botic7-rc3 ─────────────────────────────────────── GentooPlayer | 14:37 | lun 22/06/2020 ─────────────────────────────────────── v2.0 | BeagleBone Black (armv7l) ─────────────────────────────────────── eth0 | 192.168.123.169 ─────────────────────────────────────── Players Info: Squeezelite-R2 [Disabled] Squeezelite [Disabled] Networkaudiod [Disabled] LigitechMediaServer [Disabled] BubbleUpnp [Disabled] HQPlayer Embedded [Disabled] Mpd [Disabled] UpMpdCli [Disabled] RoonBridge [Enabled] RoonServer [Disabled] Mpd-Sima [Disabled] MYmpd [Disabled] minimserver [Disabled] *** Scanning for playback devices *** Card 0, ID `Botic', name `Botic' Device 0, ID `external botic-hifi-0', name `', 1 subdevices (1 available) 2..8 channels, sampling rate 11025..768000 Hz Sample formats: S16_LE, S24_LE, S32_LE, S24_3LE, U24_3LE, DSD_U8, DSD_U16_LE, DSD_U32_LE Buffer size range from 2 to 1572864 Period size range from 1 to 786432 Subdevice 0, name `subdevice #0' AUDIO CARDS CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 Internal Audio card card0 --> -- external botic-hifi-0 card0 STATUS --> closed -------------------------------------------------------------------------------------------------------- Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 2.9G 11G 21% / devtmpfs devtmpfs 10M 0 10M 0% /dev tmpfs tmpfs 50M 236K 50M 1% /run cgroup_root tmpfs 10M 0 10M 0% /sys/fs/cgroup shm tmpfs 249M 12K 249M 1% /dev/shm [ OK ] Root access verified. ───────────────────────────────────────────────────── Gentooplayer CPU Info Use cpu-governor to change CPU / performance options ───────────────────────────────────────────────────── Architecture | armv7l Temp | KERNELERR: 'c Governor | Unknown Current Freq Min Freq Max Freq CPU0 | 0 MHz 0 MHz 0 MHz [ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it. - if the temperature is not displayed, first run the command: sensors-detect --auto GentooPlayerBBB ~ # rc-status Runlevel: default dhcpcd [ started ] netmount [ started ] roonbridge [ started ] shairport-sync [ started ] web [ started ] sshd [ started ] chronyd [ stopped ] local [ started ] Dynamic Runlevel: hotplugged Dynamic Runlevel: needed/wanted dbus [ started ] avahi-daemon [ started ] Dynamic Runlevel: manual GentooPlayerBBB ~ # GentooPlayerBBB ~ # ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.123.169 netmask 255.255.255.0 broadcast 192.168.123.255 inet6 fe80::d0c4:3f37:acd5:315 prefixlen 64 scopeid 0x20<link> ether 1c:ba:8c:97:df:68 txqueuelen 1000 (Ethernet) RX packets 4102 bytes 393240 (384.0 KiB) RX errors 0 dropped 2 overruns 0 frame 0 TX packets 1996 bytes 199585 (194.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 175 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 609 bytes 119451 (116.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 609 bytes 119451 (116.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 GentooPlayerBBB ~ # Hello, some update: after trying to read the log from roonbridge from command line, which did not work I tried to read log over Webinterface. this worked and at the same moment BBB with ronnbridge showed up im Roon? ->> 06/22 16:05:58 Info: Starting RoonBridge v1.7 (build 571) stable on linuxarmv7hf 06/22 16:06:01 Trace: [rnet/RnetJsonServer] Listening on port 37893 06/22 16:06:01 Trace: [roonbridgehelperserver] SOOD announce 06/22 16:06:05 Trace: [rnet/RnetJsonServer] [client 192.168.123.8:63749] GOT {"request":"updates_subscribe"} 06/22 16:06:05 Trace: [rnet/RnetJsonServer] [client 192.168.123.8:63749] SENT NONFINAL {"status":"Success","updates":{"is_supported":true,"status":"UpToDate","progress":null,"current_version":{"machine_value":100700571,"branch":"stable","display_value":"1.7 (build 571) stable"},"available_version":null,"update_mode":"AutoAlways"}} 06/22 16:06:27 Warn: Error in web request https://push.roonlabs.com/push/1/connect: NetworkError (Aborted.) 06/22 16:06:27 Trace: [push] request to manager failed 06/22 16:06:27 Trace: [push] retrying connection in 81756ms 06/22 16:06:29 Trace: [appupdater] initial check for updates 06/22 16:06:29 Trace: [rnet/RnetJsonServer] [client 192.168.123.8:63749] SENT NONFINAL {"status":"Changed","updates":{"is_supported":true,"status":"Checking","progress":null,"current_version":{"machine_value":100700571,"branch":"stable","display_value":"1.7 (build 571) stable"},"available_version":null,"update_mode":"AutoAlways"}} 06/22 16:06:29 Debug: [base/updater] Checking for updates: https://updates.roonlabs.com/update/?v=2&serial=D84E2FBE-7931-464C-98EE-A2864C274C27&userid=&platform=linuxarmv7hf&product=RoonBridge&branding=&curbranch=stable&version=100700571&branch=stable 06/22 16:06:30 Debug: [appupdater] Update failed 06/22 16:06:30 Warn: [appupdater] Couldn't connect to update server: System.Net.WebException: Error: ConnectFailure (Network is unreachable) ---> System.Net.Sockets.SocketException: Network is unreachable at System.Net.Sockets.Socket.Connect (System.Net.EndPoint remoteEP) [0x000b6] in <383bc9f171d643afa6641b9562b9135f>:0 at System.Net.WebConnection.Connect (System.Net.HttpWebRequest request) [0x0016d] in <383bc9f171d643afa6641b9562b9135f>:0 --- End of inner exception stack trace --- at System.Net.HttpWebRequest.EndGetResponse (System.IAsyncResult asyncResult) [0x00058] in <383bc9f171d643afa6641b9562b9135f>:0 at System.Net.HttpWebRequest.GetResponse () [0x0000e] in <383bc9f171d643afa6641b9562b9135f>:0 at Sooloos.Updater+WebUpdate.Load (System.String updateurl) [0x00028] in <e932c7560bf54897bf9ef87be3bdb7c1>:0 at Sooloos.Updater+WebUpdate.CheckForUpdate (System.String serial, System.String userid, System.String product, System.String branding, System.String desired_branch, Sooloos.Version version, Sooloos.Updater+WebUpdate& update) [0x000a7] in <e932c7560bf54897bf9ef87be3bdb7c1>:0 at Sooloos.Updater+<>c__DisplayClass27_0.<ScanOnce>b__0 (System.Object <p0>) [0x0002a] in <e932c7560bf54897bf9ef87be3bdb7c1>:0 06/22 16:06:30 Trace: [rnet/RnetJsonServer] [client 192.168.123.8:63749] SENT NONFINAL {"status":"Changed","updates":{"is_supported":true,"status":"Error","progress":null,"current_version":{"machine_value":100700571,"branch":"stable","display_value":"1.7 (build 571) stable"},"available_version":null,"update_mode":"AutoAlways"}} 06/22 16:07:59 Warn: Error in web request https://push.roonlabs.com/push/1/connect: NetworkError (Aborted.) 06/22 16:07:59 Trace: [push] request to manager failed 06/22 16:07:59 Trace: [push] retrying connection in 110403ms 06/22 16:09:52 Trace: Successful POST response from https://push.roonlabs.com/push/1/connect 06/22 16:09:52 Trace: [push] connecting to 34.73.16.78:9200 06/22 16:12:06 Trace: [push] restarting connection (Connection timed out) 06/22 16:12:06 Trace: [push] retrying connection in 257218ms 06/22 16:16:24 Trace: Successful POST response from https://push.roonlabs.com/push/1/connect 06/22 16:16:24 Trace: [push] connecting to 34.73.16.78:9200 Link to comment
antonellocaroli Posted June 22, 2020 Author Share Posted June 22, 2020 @Branko unfortunately the image for BBB hasn't been updated for a long time, actually I don't even know if it's going to be for it.... I don't think there are many users who use it.... GentooPlayer home Facebook Documentation Link to comment
Jan.ho Posted June 22, 2020 Share Posted June 22, 2020 56 minutes ago, antonellocaroli said: @Branko unfortunately the image for BBB hasn't been updated for a long time, actually I don't even know if it's going to be for it.... I don't think there are many users who use it.... NoNoNo! Please keep the BBB with botic updated! My donation was already made and the rPi with BruteFIR you just helped me on was for my dad, and I’m a believer in the BBB with external Master clock input for real high quality Audio out of a SBC. I have one running, but not yet changed to GentooPlayer. And there are many other believers at diyaudio:com, too. Link to comment
Branko Posted June 23, 2020 Share Posted June 23, 2020 21 hours ago, Jan.ho said: NoNoNo! Please keep the BBB with botic updated! My donation was already made and the rPi with BruteFIR you just helped me on was for my dad, and I’m a believer in the BBB with external Master clock input for real high quality Audio out of a SBC. I have one running, but not yet changed to GentooPlayer. And there are many other believers at diyaudio:com, too. Yes Please. Quantity is not everything. :)) Link to comment
antonellocaroli Posted June 25, 2020 Author Share Posted June 25, 2020 @Branko @Jan.ho bobfa 1 GentooPlayer home Facebook Documentation Link to comment
Jan.ho Posted June 25, 2020 Share Posted June 25, 2020 19 minutes ago, antonellocaroli said: @Branko @Jan.ho Wonderful news!! Thank you very much!!! Link to comment
akycn Posted June 25, 2020 Share Posted June 25, 2020 7 hours ago, antonellocaroli said: @布兰科 J thank you,I have a sparky,a,BBB,very good. Link to comment
Zauurx Posted June 25, 2020 Share Posted June 25, 2020 There is a way (like ethtool) to force eth0 to 100mb full instead of 1GMb ? ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
antonellocaroli Posted June 26, 2020 Author Share Posted June 26, 2020 9 hours ago, Zauurx said: There is a way (like ethtool) to force eth0 to 100mb full instead of 1GMb ? you can use mii-tool (mii-tool --help) example: mii-tool -F 100baseTx-HD eth0 or if you want you can install ethtool emerges --ask sys-apps/ethtool GentooPlayer home Facebook Documentation Link to comment
Downtheline Posted June 26, 2020 Share Posted June 26, 2020 Is it possible to migrate my windows hardware raid 0 array to gentooplayer? Booting via usb stick. Link to comment
antonellocaroli Posted June 26, 2020 Author Share Posted June 26, 2020 43 minutes ago, Downtheline said: Is it possible to migrate my windows hardware raid 0 array to gentooplayer? Booting via usb stick. I have no experience in this... but these two links may be useful to you:https://wiki.gentoo.org/wiki/Complete_Handbook/Software_RAIDhttps://www.golinuxcloud.com/configure-software-raid-0-array-linux/ Downtheline 1 GentooPlayer home Facebook Documentation Link to comment
Gavin1977 Posted June 26, 2020 Share Posted June 26, 2020 Can't see if anyone has asked this, but is Gentoo Player ok to run dual boot e.g. use clover bootloader, GP on one partition, Windows on another partition of the same drive? Thanks Link to comment
antonellocaroli Posted June 26, 2020 Author Share Posted June 26, 2020 24 minutes ago, Gavin1977 said: Can't see if anyone has asked this, but is Gentoo Player ok to run dual boot e.g. use clover bootloader, GP on one partition, Windows on another partition of the same drive? Thanks it's possible, but you have to work at it... but now a 64gb ssd is very cheap. so I recommend a dedicated disk... Gavin1977 1 GentooPlayer home Facebook Documentation Link to comment
Zauurx Posted June 26, 2020 Share Posted June 26, 2020 5 hours ago, antonellocaroli said: you can use mii-tool (mii-tool --help) example: mii-tool -F 100baseTx-HD eth0 or if you want you can install ethtool emerges --ask sys-apps/ethtool Thanks Antonello. I tried ... but the music was played in chunks ... like a buffer problem. Finally, return to the "negociate" and 1Gb function. I admit that allo did not really succeed its ethernet integration on the USBridge Sig ROON + HQP / Hdplex H3-i5 + 400ATX >Gustard A26 (NAA twk) > SQM > Benchmark AHB2 / Recital Audio Illumine HEFA Link to comment
Gavin1977 Posted June 26, 2020 Share Posted June 26, 2020 1 hour ago, antonellocaroli said: it's possible, but you have to work at it... but now a 64gb ssd is very cheap. so I recommend a dedicated disk... I'll give it a go - my trouble is that I only have one M2 slot. Link to comment
Branko Posted June 26, 2020 Share Posted June 26, 2020 On 6/25/2020 at 9:24 AM, antonellocaroli said: @Branko @Jan.ho Thank you! How would be the best practice for upgrade? Should I copy a new Image to SD-card? Regards Branko Link to comment
antonellocaroli Posted June 26, 2020 Author Share Posted June 26, 2020 57 minutes ago, Branko said: Should I copy a new Image to SD-card? Yes GentooPlayer home Facebook Documentation Link to comment
Exocer Posted June 27, 2020 Share Posted June 27, 2020 Is there a way to locally cache songs using a service provided by GentooPlayer? I tried enabling some settings within BubbleUPNP to make songs "seekable" and these did not work. I don't need the songs to be seekable but the idea was to attempt to cache songs prior to playing to improve sound quality. Link to comment
antonellocaroli Posted June 27, 2020 Author Share Posted June 27, 2020 49 minutes ago, Exocer said: Is there a way to locally cache songs using a service provided by GentooPlayer? I tried enabling some settings within BubbleUPNP to make songs "seekable" and these did not work. I don't need the songs to be seekable but the idea was to attempt to cache songs prior to playing to improve sound quality. are you talking about streaming services? qobuz or tidal? the answer in this case is no. you can try increasing or decreasing in mpd audio_buffer_size GentooPlayer home Facebook Documentation Link to comment
antonellocaroli Posted June 27, 2020 Author Share Posted June 27, 2020 update version 2.15 PC-x86_64 GentooPlayer home Facebook Documentation Link to comment
Jan.ho Posted June 27, 2020 Share Posted June 27, 2020 I'm trying to configure an audio Input via USB. lsusb -v : Bus 001 Device 003: ID 0a4a:6a02 Ploytec GmbH Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0a4a Ploytec GmbH idProduct 0x6a02 bcdDevice 1.00 iManufacturer 1 Ploytec GmbH iProduct 2 YELLOWTEC PUC2 iSerial 3 no serial number bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x00e4 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 480mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 0x0034 bInCollection 2 baInterfaceNr(0) 1 baInterfaceNr(1) 2 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0602 Digital Audio Interface bAssocTerminal 0 bSourceID 1 iTerminal 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0602 Digital Audio Interface bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 4 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 3 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 4 bRefresh 0 bSynchAddress 133 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0003 1x 3 bytes bInterval 4 bRefresh 5 bSynchAddress 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x012c 1x 300 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x012c 1x 300 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0000 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 GentooPlayerRpi4-64 ~ # cat /etc/modprobe.d/alsa.conf # Alsa kernel modules' configuration file. # ALSA portion alias char-major-116 snd snd-aloop alias snd-card-2 snd-usb-audio alias sound-slot-2 snd-card-2 options snd-usb-audio index=2 # OSS/Free portion alias char-major-14 soundcore ## ## IMPORTANT: ## You need to customise this section for your specific sound card(s) ## and then run `update-modules' command. ## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ## ## ALSA portion ## alias snd-card-0 snd-interwave ## alias snd-card-1 snd-ens1371 ## OSS/Free portion ## alias sound-slot-0 snd-card-0 ## alias sound-slot-1 snd-card-1 ## # OSS/Free portion - card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ## OSS/Free portion - card #2 ## alias sound-service-1-0 snd-mixer-oss ## alias sound-service-1-3 snd-pcm-oss ## alias sound-service-1-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss # Set this to the correct number of cards. options snd cards_limit=3 GentooPlayerRpi4-64 ~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sndrpirpidac [snd_rpi_rpi_dac], device 0: RPi-DAC HiFi pcm1794a-codec-0 [RPi-DAC HiFi pcm1794a-codec-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: PUC2 [YELLOWTEC PUC2], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 BUT: GentooPlayerRpi4-64 ~ # arecord -l **** List of CAPTURE Hardware Devices **** card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 So, there's no sound recording device. What did I miss? My Plan is, to stream the Input from the USB-device through JACK into BruteFIR... long way to go Link to comment
guilders Posted June 27, 2020 Share Posted June 27, 2020 Hello, I wanted to update to the latest 2.15 version but can bot run GP-update first : Local overlay and gentooplayer scripts will be updated [OK] Cloning into 'GP-overlay'... fatal: unable to access 'https://github.com/antonellocaroli/GP-overlay.git/': Failed to connect to github.com port 443: Connection timed out [FAILED] Any idea ? Link to comment
antonellocaroli Posted June 27, 2020 Author Share Posted June 27, 2020 1 hour ago, guilders said: Hello, I wanted to update to the latest 2.15 version but can bot run GP-update first : Local overlay and gentooplayer scripts will be updated [OK] Cloning into 'GP-overlay'... fatal: unable to access 'https://github.com/antonellocaroli/GP-overlay.git/': Failed to connect to github.com port 443: Connection timed out [FAILED] Any idea ? https://audiophilestyle.com/forums/topic/55235-gentooplayer/?do=findComment&comment=1062446 il pc is connected to the internet? GentooPlayer home Facebook Documentation Link to comment
guilders Posted June 27, 2020 Share Posted June 27, 2020 Yes, of course. Anyway I downloaded 2.15 and flashed my sd-card. Link to comment
Exocer Posted June 27, 2020 Share Posted June 27, 2020 5 hours ago, antonellocaroli said: are you talking about streaming services? qobuz or tidal? the answer in this case is no. you can try increasing or decreasing in mpd audio_buffer_size Yes streaming. Thank you! Will try this and report back. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now