Jump to content
IGNORED

GentooPlayer


Recommended Posts

9 minutes ago, antonellocaroli said:

I don't reproduce the two problems...

 

1) did you overwrite the configuration file of upmpdcli? with etc-update?

 

2) does not change from 2.10 to 2.11

 

1) No, but I have manually set "friendlyname = UpMpd (rpi6 sala)" and "ohproductroom = UpMpd (rpi6 sala)" as I had done in 2.0

 

2) The problem is within 2.11. It seems that some other action (e.g. enabling upmpdcli or re-selecting a DAC) overwrites the cpufraqmax settings

 

I'll try to flash the image again, restart from scratch and report my findings. Thanks for your support!

Link to post
Share on other sites
10 minutes ago, nbpf said:

2) The problem is within 2.11. It seems that some other action (e.g. enabling upmpdcli or re-selecting a DAC) overwrites the cpufraqmax settings

the only one that overrides them and returns them to default values is "select dac".

but it's the same for both 2.10 and 2.11.

Link to post
Share on other sites
17 minutes ago, antonellocaroli said:

the only one that overrides them and returns them to default values is "select dac".

but it's the same for both 2.10 and 2.11.

Ok, then issue 2) is resolved. I still have the problem that upmpdcli is not visible in my network in 2.11. In 2.0 it works fine and I have not tried it in 2.10. 

Link to post
Share on other sites
13 minutes ago, nbpf said:

Ok, then issue 2) is resolved. I still have the problem that upmpdcli is not visible in my network in 2.11. In 2.0 it works fine and I have not tried it in 2.10. 

I don't know... I'm just using it right now...

 

I don't know... I'm just using it right now...

It would be interesting to see if others have the same problem...

Link to post
Share on other sites

Hello,

 

today got Shairport-sync to work (BBB; Botic Kernel) with exceptional help from Antonello Caroli.

 

Now I can stream with airplay any music perfectly.

 

Thank you a lot

 

Branko

Link to post
Share on other sites
9 hours ago, nbpf said:

Ok, then issue 2) is resolved. I still have the problem that upmpdcli is not visible in my network in 2.11. In 2.0 it works fine and I have not tried it in 2.10. 

 

Maybe my problem is the same.  Almost every time I restart I have to disable and then enable upmpdcli before it shows up and I am not in RAM mode.  This is with Rpi4.

Link to post
Share on other sites
5 hours ago, antonellocaroli said:

can you post the system-info for me?
so I put myself in the same situation, I can't reproduce the problem in my system...

 

_____ _ _____ _
/ ____| | | | __ \| |
| | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __
| | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__|
| |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ |
\_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_|
__/ |
|___/
#Profile1
Profile: Profile1
RamSystem: Mode 4
Free memory: 3063MB of total 3854MB

 

Kernel: 4.19.97-GentooPlayer-RT-MIN-NOGRAPH-EUP100RCU-rt38+
───────────────────────────────────────
GentooPlayer | 01:17 | mar 17/03/2020
───────────────────────────────────────
v2.11 | Raspberry Pi 4B+ (aarch64)
───────────────────────────────────────
eth0 | 192.168.1.82
───────────────────────────────────────

 

Players Info:
Squeezelite-R2 [Disabled]
Squeezelite [Disabled]
Networkaudiod [Disabled]
LigitechMediaServer [Disabled]
BubbleUpnp [Disabled]
HQPlayer Embedded [Disabled]
Mpd [Enabled]
UpMpdCli [Enabled]
RoonBridge [Enabled]
RoonServer [Disabled]
Mpd-Sima [Disabled]
MYmpd [Disabled]
minimserver [Disabled]
shairport-sync [Disabled]

 

*** Scanning for playback devices ***
Card 0, ID `USB', name `Schiit Yggdrasil Unison USB'
Device 0, ID `USB Audio', name `USB Audio', 1 subdevices (1 available)
2 channels, sampling rate 44100..192000 Hz
Sample formats: S16_LE, S32_LE, S24_3LE
Buffer size range from 16 to 262144
Period size range from 8 to 131072

 

Subdevice 0, name `subdevice #0'


 

AUDIO CARDS
CARD TYPE ADDRESS NAME
--------------------------------------------------------------------------------------------------------
card0 USB Audio card usb1 --> 30be:1001 Schiit Audio Schiit
card0 STATUS --> closed
--------------------------------------------------------------------------------------------------------


 

Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 6.8G 3.8G 2.7G 59% /
devtmpfs devtmpfs 10M 0 10M 0% /dev
tmpfs tmpfs 386M 272K 386M 1% /run
shm tmpfs 1.9G 12K 1.9G 1% /dev/shm
none tmpfs 12M 9.4M 2.0M 83% /bin
none tmpfs 15M 12M 2.9M 80% /etc
none tmpfs 9.5M 7.6M 2.0M 80% /sbin
none tmpfs 47M 37M 11M 78% /lib
none tmpfs 9.5M 8.5M 1.1M 90% /lib64
none tmpfs 464M 427M 37M 93% /usr
none tmpfs 33M 2.9M 30M 9% /var
none tmpfs 4.9M 0 4.9M 0% /tmp
none tmpfs 77M 62M 16M 80% /opt
none tmpfs 52M 2.4M 49M 5% /root


 

[ OK ] Root access verified.

 

─────────────────────────────────────────────────────
Gentooplayer CPU Info
Use cpu-governor to change CPU / performance options
─────────────────────────────────────────────────────
Architecture | aarch64
Temp | 56'c : 132'f | Running warm, but safe.
Governor | performance

 

Current Freq Min Freq Max Freq
CPU0 | 1500 MHz 600 MHz 1500 MHz
CPU1 | 1500 MHz 600 MHz 1500 MHz
CPU2 | 1500 MHz 600 MHz 1500 MHz
CPU3 | 1500 MHz 600 MHz 1500 MHz

 

[ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it.
- if the temperature is not displayed, first run the command: sensors-detect --auto
Link to post
Share on other sites

@antonellocaroli, @askat1988: I have now reinstalled 2.10 from scratch, updated to 2.11 and then setup my system (included upmpdcli.conf edits) in 2.11. Everything works now as expected. It is conceivable that the upmpdcli problems that I have reported in my previous posts might have to do with the fact that, in my previous attempt, I had first set up my system in 2.10 and then updated to 2.11. It is of course possible that I had done something wrong. Here is my system info:

 

Profile: Profile not Setting
RamSystem: Ramsystem not enabled
Free memory: 897MB of total 968MB


Kernel: 4.19.97-GentooPlayer-ST+
───────────────────────────────────────
GentooPlayer | 12:04 | mar 17/03/2020
───────────────────────────────────────
v2.11 | Raspberry Pi 3B/3B+ (aarch64)
───────────────────────────────────────
wlan0 | 192.168.178.50
───────────────────────────────────────


Players Info:
Squeezelite-R2 [Disabled]
Squeezelite [Disabled]
Networkaudiod [Disabled]
LigitechMediaServer [Disabled]
BubbleUpnp [Disabled]
HQPlayer Embedded [Disabled]
Mpd [Enabled]
UpMpdCli [Enabled]
RoonBridge [Disabled]
RoonServer [Disabled]
Mpd-Sima [Disabled]
MYmpd [Disabled]
minimserver [Disabled]
shairport-sync [Disabled]


*** Scanning for playback devices ***
Card 0, ID `sndallodigione', name `snd_allo_digione'
Device 0, ID `Allo DigiOne HiFi wm8804-spdif-0', name `Allo DigiOne HiFi wm8804-spdif-0', 1 subdevices (1 available)
2 channels, sampling rate 32000..192000 Hz
Sample formats: S16_LE, S24_LE
Buffer size range from 64 to 131072
Period size range from 32 to 65536


Subdevice 0, name `subdevice #0'



AUDIO CARDS
CARD TYPE ADDRESS NAME
--------------------------------------------------------------------------------------------------------
card0 Internal Audio card card0 --> -- Allo DigiOne HiFi
card0 STATUS --> closed
--------------------------------------------------------------------------------------------------------



Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 14G 3.1G 11G 24% /
devtmpfs devtmpfs 10M 0 10M 0% /dev
tmpfs tmpfs 97M 264K 97M 1% /run
cgroup_root tmpfs 10M 0 10M 0% /sys/fs/cgroup
shm tmpfs 485M 0 485M 0% /dev/shm



[ OK ] Root access verified.


─────────────────────────────────────────────────────
Gentooplayer CPU Info
Use cpu-governor to change CPU / performance options
─────────────────────────────────────────────────────
Architecture | aarch64
Temp | 44'c : 111'f | Optimal temperature.
Governor | performance


Current Freq Min Freq Max Freq
CPU0 | 1000 MHz 1000 MHz 1000 MHz
CPU1 | 1000 MHz 1000 MHz 1000 MHz
CPU2 | 1000 MHz 1000 MHz 1000 MHz
CPU3 | 1000 MHz 1000 MHz 1000 MHz


[ INFO ] GentooPlayer-CPU_info | CPU current frequency, may be affected by this script, due to the processing required to run it.
- if the temperature is not displayed, first run the command: sensors-detect --auto
Link to post
Share on other sites

@antonellocaroli

Is it possible to update to LMS 8.0.0?

Do you recommend it or it's a bit soon?

Thnx!!

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites
Just now, antonellocaroli said:

It's a beta version...

but if you want to try it, you have to take out the 7.9.

 

emerge -C logitechmediaserver-bin

 

and install the 8

 

emerge --ask logitechemediaserver-beta

thank you

this means that I will have to configure from the beginning? 

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites
1 minute ago, antonellocaroli said:

probably not, you have to try ... I do not know ... unfortunately I do not have time to check everything ...

Yes of course!
I absolutely understand! 

Thank you once more!!
Those #stayathome days your work is a grate way to get lost in music and leave this tragic situation behind for a while!!
 

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites
21 minutes ago, DomieMic65 said:

Yes of course!
I absolutely understand! 

Thank you once more!!
Those #stayathome days your work is a grate way to get lost in music and leave this tragic situation behind for a while!!
 

I asked for a step...

 

emerge -C logitechmediaserver-bin

 

echo "media-sound/logitechmediaserver-beta logitechmediaserver-beta" >> /etc/portage/package.license/my_license

 

emerge --ask logitechemediaserver-beta

Link to post
Share on other sites

I have shut down ( "shutd" ) properly my RPi but then it doesn't boot up again!

Usually I have it run all the time and I it has rebooted many many times but after the shutd it doesn't work!

I do not remember exactly but 99% it was not in ramsystem mode!

 

As far as LMS 8.0 I decided not to install it yet!

 

 

All the best to all and stay safe (in home)!!!!!

 

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites
8 minutes ago, DomieMic65 said:

I have shut down ( "shutd" ) properly my RPi but then it doesn't boot up again!

Usually I have it run all the time and I it has rebooted many many times but after the shutd it doesn't work!

I do not remember exactly but 99% it was not in ramsystem mode!

 

As far as LMS 8.0 I decided not to install it yet!

 

 

All the best to all and stay safe (in home)!!!!!

 

I never turn my rpi off regularly, I've always just turned the power off and never had any problems...

You sure you weren't using the ramsystem?
if you were using the ramsystem and LMS probably doesn't start for full memory...

There´s a function made to avoid this, which is to move the lms cache.

I´ve tried version 8 of LMS and it seems to work fine...

Link to post
Share on other sites
23 minutes ago, antonellocaroli said:

I never turn my rpi off regularly, I've always just turned the power off and never had any problems...

You sure you weren't using the ramsystem?
if you were using the ramsystem and LMS probably doesn't start for full memory...

There´s a function made to avoid this, which is to move the lms cache.

I´ve tried version 8 of LMS and it seems to work fine...

I didn't shut down the RPi4 I use for LMS. I shut the one I use for player (3B+)

No I am not 100% sure I If I was on ramsystem or not! LMS was not enabled though!

On my RPi4 (LMS) I have moved the cache!

Great for LMS 8 I might give it a try!

 

Thank you!!

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites

Hi - using web interface I now get the following error when executing any script

 

Calling the script...

 

Internal Server Error

 

I have restarted the NUC and checked network connect - any ideas?  Playback still works fine.

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...