Patatorz Posted February 19, 2020 Share Posted February 19, 2020 Sorry for the stupid question but where can i find in gentooplayer the vconsole.conf in order to change the local keyboard to latin1 ? BR Blog / Forum Link to comment
antonellocaroli Posted February 19, 2020 Author Share Posted February 19, 2020 https://wiki.gentoo.org/wiki/Localization/Guide/it GentooPlayer home Facebook Documentation Link to comment
Patatorz Posted February 19, 2020 Share Posted February 19, 2020 Thanks Antonello. Shame on me, i should look to the wiki before asking ! Blog / Forum Link to comment
antonellocaroli Posted February 19, 2020 Author Share Posted February 19, 2020 17 minutes ago, Patatorz said: Thanks Antonello. Shame on me, i should look to the wiki before asking ! you do well to ask... maybe I get ideas... GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted February 19, 2020 Share Posted February 19, 2020 On 2/18/2020 at 10:33 AM, antonellocaroli said: on gentooplayer is installed uhubctl to turn off the usb https://github.com/mvp/uhubctl so with this command uhubctl -l 1-1 -p 4 -a 0 I can power off all the usb ports of the rpi4? thank you!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
Patatorz Posted February 19, 2020 Share Posted February 19, 2020 1 hour ago, antonellocaroli said: you do well to ask... maybe I get ideas... ok great 🙂 Blog / Forum Link to comment
ozcalgp Posted February 20, 2020 Share Posted February 20, 2020 Hi guys. Have been trialing GP for the last few days and am very impressed with the software. Originally I set up GP on my PI4 ,connected a usb hard drive and got a working system. I have now setup an x86 pc with the same usb harddrive and GP running minum server. I can see the music on my bedroom pc running win10 and Jriver but when I try to mount a remote disc on the Pi4 player I am not able to mount the disc , with this being returned : "mount error(111): could not connect to 192.168.20.15Unable to find suitable address." or this " mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd." Any help would be greatly appreciated. Link to comment
antonellocaroli Posted February 20, 2020 Author Share Posted February 20, 2020 4 hours ago, ozcalgp said: Hi guys. Have been trialing GP for the last few days and am very impressed with the software. Originally I set up GP on my PI4 ,connected a usb hard drive and got a working system. I have now setup an x86 pc with the same usb harddrive and GP running minum server. I can see the music on my bedroom pc running win10 and Jriver but when I try to mount a remote disc on the Pi4 player I am not able to mount the disc , with this being returned : "mount error(111): could not connect to 192.168.20.15Unable to find suitable address." or this " mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd." Any help would be greatly appreciated. nfs sharing is through the router? you seem to have the same problem as @DomieMic65. You need to change the sharing settings on your router... GentooPlayer home Facebook Documentation Link to comment
Patatorz Posted February 20, 2020 Share Posted February 20, 2020 Is there any reason why there is not a ramdisk mode onboarding Minimserver/BubbleUPnP/Roonserver ? Thanks Blog / Forum Link to comment
antonellocaroli Posted February 20, 2020 Author Share Posted February 20, 2020 6 minutes ago, Patatorz said: Is there any reason why there is not a ramdisk mode onboarding Minimserver/BubbleUPnP/Roonserver ? Thanks on Rpi? on rpi roonserver is not installed ... does not exist for arm ... and the minimserver should work anyway... bubble (6 and 7?) GentooPlayer home Facebook Documentation Link to comment
ozcalgp Posted February 20, 2020 Share Posted February 20, 2020 3 minutes ago, antonellocaroli said: nfs sharing is through the router? you seem to have the same problem as @DomieMic65. You need to change the sharing settings on your router... Hi Antone ,I have enabled media sharing on the router. Do I need to change the mount path? Link to comment
antonellocaroli Posted February 20, 2020 Author Share Posted February 20, 2020 18 minutes ago, ozcalgp said: Hi Antone ,I have enabled media sharing on the router. Do I need to change the mount path? you should set the client on the router.... the screens are in Italian, but I think you can understand... GentooPlayer home Facebook Documentation Link to comment
Patatorz Posted February 20, 2020 Share Posted February 20, 2020 43 minutes ago, antonellocaroli said: on Rpi? on rpi roonserver is not installed ... does not exist for arm ... and the minimserver should work anyway... bubble (6 and 7?) No on a x86 the 64b headless version. Blog / Forum Link to comment
antonellocaroli Posted February 20, 2020 Author Share Posted February 20, 2020 1 hour ago, Patatorz said: No on a x86 the 64b headless version. Ramdisk mode 3 - Squeezelite, Squeezelite-R2, Mpd, Networkaudiod, RoonServer, Hqplayer Embedded, UpMPDcli, BubbleUpnp minimserver it should work for everything... if you have enough ram you can also use Ramdisk mode 5 which is complete with everything..... It's written xfce but it's also good on headless... GentooPlayer home Facebook Documentation Link to comment
Patatorz Posted February 20, 2020 Share Posted February 20, 2020 With 32Go it should be good 🙂 Blog / Forum Link to comment
antonellocaroli Posted February 20, 2020 Author Share Posted February 20, 2020 15 minutes ago, Patatorz said: With 32Go it should be good 🙂 wow... there are so many... Let me know how much free ram you have left after trying Ramdisk mode 5? GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted February 20, 2020 Share Posted February 20, 2020 4 hours ago, ozcalgp said: Hi Antone ,I have enabled media sharing on the router. Do I need to change the mount path? 4 hours ago, antonellocaroli said: nfs sharing is through the router? you seem to have the same problem as @DomieMic65. You need to change the sharing settings on your router... In my case worked when I enabled the nfs service on GentooPlayer, after following @antonellocaroli instructions. I don’t know if in the latest image it runs by default! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
Patatorz Posted February 20, 2020 Share Posted February 20, 2020 3 hours ago, antonellocaroli said: wow... there are so many... Let me know how much free ram you have left after trying Ramdisk mode 5? 18500 free. I run also a quite big Roon Library. Works fine as of now Blog / Forum Link to comment
antonellocaroli Posted February 20, 2020 Author Share Posted February 20, 2020 30 minutes ago, Patatorz said: 18500 free. I run also a quite big Roon Library. Works fine as of now It's sure to be the roon database that occupies the ram... What is the size of the database? du -sh /root/.RoonServer/Database but it sounds great 18500 free, including the roon database... GentooPlayer home Facebook Documentation Link to comment
DomieMic65 Posted February 20, 2020 Share Posted February 20, 2020 On 2/19/2020 at 7:54 PM, DomieMic65 said: so with this command uhubctl -l 1-1 -p 4 -a 0 I can power off all the usb ports of the rpi4? thank you!! @antonellocaroli May be I should give all the following commands? "uhubctl -l 1-1 -p 4 -a 0" "uhubctl -l 2 -p 4 -a 0" "uhubctl -l 3 -p 1 -a 0" What about this commend from the above link ?? : "You may need to update firmware to vl805 00137ac or later to make power switching work on RPi 4B" Will power switching work on GentooPlayer? Thank you!!! Mac Mini with JRMC26 or Audirvana / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine Cables: Vovox, DIY, Furutech. Portable sources: iPad, DELL Laptop with JRiver MC26 Link to comment
antonellocaroli Posted February 21, 2020 Author Share Posted February 21, 2020 9 hours ago, DomieMic65 said: @antonellocaroli May be I should give all the following commands? "uhubctl -l 1-1 -p 4 -a 0" "uhubctl -l 2 -p 4 -a 0" "uhubctl -l 3 -p 1 -a 0" What about this commend from the above link ?? : "You may need to update firmware to vl805 00137ac or later to make power switching work on RPi 4B" Will power switching work on GentooPlayer? Thank you!!! in the next version DomieMic65 1 GentooPlayer home Facebook Documentation Link to comment
Patatorz Posted February 21, 2020 Share Posted February 21, 2020 On 2/20/2020 at 1:28 PM, antonellocaroli said: It's sure to be the roon database that occupies the ram... What is the size of the database? du -sh /root/.RoonServer/Database but it sounds great 18500 free, including the roon database... 8.5Go Blog / Forum Link to comment
nbpf Posted February 22, 2020 Share Posted February 22, 2020 I have noticed that after having removed a software component (for instance, 'squeezelite') that very component is still in the list of removable software. Is that the intended behavior? I would rather expect a removed software to disappear from the lest of removable software. Link to comment
ozcalgp Posted February 22, 2020 Share Posted February 22, 2020 On 2/20/2020 at 2:27 PM, antonellocaroli said: you should set the client on the router.... the screens are in Italian, but I think you can understand... Hi Antone, I don't have those pages on my router, both the pi and the server are on the same non managed switch and have static routes to the router. Link to comment
nbpf Posted February 22, 2020 Share Posted February 22, 2020 Is there a recommended setup for GenTooPlayer running only MPD and UpMpCli on a Raspberry Pi 3B+? Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now