Jump to content
IGNORED

GentooPlayer


Recommended Posts

2 hours ago, simplicyk said:

Unfortunatelly post update and restart LMS stopped working although it is still enabled. 

unfortunately you have to solve it from the shell or get the 6.10 online version...

from shell:

 

emerge -1 dev-python/incremental

 

emerge -C logitechmediaserver-bin

 

emerge --depclean

 

emerge logitechmediaserver-bin

Link to post
Share on other sites

I cannot seem to upgrade from 6.00-29 to 6.10. 
 

I’ve tried a number of times — including after a reboot. I’m not running in the RAM system, not have any profiles enabled (but do have some CPU tweaks enabled). 
 

Since updating to 6.00, I can no longer get MPD to work when booting from RAM (perhaps, like Simplicyk’s LMS issue?). 
 

If that is the case, is there some commands I can add like that for MPD?
 

I am also having some connection issues with my iOS client (Rigelian). But not sure if that’s an issue with GP or not.  
 

On a brighter note, I was finally able to access ssh and configure the system to under-clock automatically after rebooting. Thank you so much for your easy instructions on that, Filippo! 

02E6D1AD-DC9B-4253-A652-866F4776E84F.png

741B12B4-A47D-4D73-A831-5927530C4A75.png

Synology NAS DS216SE + TF cards -> GentooPlayer in RAM on mini fanless/supercap NUC -> Audio GD R-27 -> S.A.T. Infinity monoblocks -> Gallo Stradas + TR-3 sub Hifiman HE560

Link to post
Share on other sites
1 hour ago, odelay said:

Non riesco ad aggiornare da 6.00-29 a 6.10. 
 

Ho provato diverse volte, anche dopo un riavvio. Non sono in esecuzione nel sistema RAM, non ho alcun profilo abilitato (ma ho alcune modifiche alla CPU abilitate). 
 

Dall'aggiornamento a 6.00, non riesco più a far funzionare MPD durante l'avvio dalla RAM (forse, come il problema LMS di Simplicyk?). 
 

In tal caso, ci sono alcuni comandi che posso aggiungere in questo modo per MPD?
 

Sto riscontrando anche alcuni problemi di connessione con il mio client iOS (Rigelian). Ma non sono sicuro se questo sia un problema con GP o no.  
 

In una nota più brillante, sono stato finalmente in grado di accedere a ssh e configurare il sistema per l'underclock automatico dopo il riavvio. Grazie mille per le tue facili istruzioni su questo, Filippo! 

02E6D1AD-DC9B-4253-A652-866F4776E84F.png

741B12B4-A47D-4D73-A831-5927530C4A75.png

have you tried re-entering your credentials?

Link to post
Share on other sites
16 hours ago, antonellocaroli said:

have you tried re-entering your credentials?

Thanks for the suggestion - it never occurred to me. But sadly, it failed. 

 

I don’t notice a difference sonically if I’m booting from RAM or not (but do notice a difference if playing music from different sources). So not too worried about it currently. 
 

Setting up all my preference is a little tedious, so will wait for a major update. thanks again 🙏

Synology NAS DS216SE + TF cards -> GentooPlayer in RAM on mini fanless/supercap NUC -> Audio GD R-27 -> S.A.T. Infinity monoblocks -> Gallo Stradas + TR-3 sub Hifiman HE560

Link to post
Share on other sites
4 hours ago, odelay said:

Thanks for the suggestion - it never occurred to me. But sadly, it failed. 

 

I don’t notice a difference sonically if I’m booting from RAM or not (but do notice a difference if playing music from different sources). So not too worried about it currently. 
 

Setting up all my preference is a little tedious, so will wait for a major update. thanks again 🙏

space on root partition probleme....

Link to post
Share on other sites

@antonellocaroli 

 

I have successfully upgrade from 6.0 to 6.10. 

However, when I flashed a fresh 6.10 image, I could not remove un-use software (even with default kernel, default profile, no ram system).

Below is the error message:


 

!!! /etc/portage/make.profile is not a symlink and will probably prevent most merges.
!!! It should point into a profile within /var/db/repos/gentoo/profiles/
!!! (You can safely ignore this message when syncing. It's harmless.)


 

!!! Your current profile is invalid. If you have just changed your profile
!!! configuration, you should revert back to the previous configuration.
!!! Allowed actions are limited to --help, --info, --search, --sync, and
!!! --version.

 

 

Not sure what is the issue. 

Link to post
Share on other sites
8 minutes ago, chipvn said:

@antonellocaroli 

 

I have successfully upgrade from 6.0 to 6.10. 

However, when I flashed a fresh 6.10 image, I could not remove un-use software (even with default kernel, default profile, no ram system).

Below is the error message:


 

!!! /etc/portage/make.profile is not a symlink and will probably prevent most merges.
!!! It should point into a profile within /var/db/repos/gentoo/profiles/
!!! (You can safely ignore this message when syncing. It's harmless.)


 

!!! Your current profile is invalid. If you have just changed your profile
!!! configuration, you should revert back to the previous configuration.
!!! Allowed actions are limited to --help, --info, --search, --sync, and
!!! --version.

 

 

Not sure what is the issue. 

emerge --sync
solved ;)

Link to post
Share on other sites
37 minutes ago, antonellocaroli said:

emerge --sync
solved ;)

Thanks for the extremely fast solution.

 

Successfully uninstalled un-used softwares after an gp-update. :)

Link to post
Share on other sites

Yes. I went back and burned 6.00 to an sd card, and had the same message, even when re-entering my key and username. I tried a couple of more times, and it seemed to work. Now I'm installing gmrender-resurrect for the last hour +. which is fine, because I know it takes a long time. So, it either resolved itself or I don't know what. Tomorrow I will see if I can update to 6.10.

 

On a different but maybe related topic, whenever I try to choose a kernel, the system shuts down to reboot (I think) but doesn't come back up. When I click to a different section and come back to select kernel, the kernel selected has disappeared. Suggestions? How long should it take to reboot on a rpi4?  Thanks. 

Link to post
Share on other sites
1 hour ago, irate1 said:

the system shuts down to reboot (I think) but doesn't come back up.

yes, it reboots

 

1 hour ago, irate1 said:

When I click to a different section and come back to select kernel, the kernel selected has disappeared. Suggestions?

weird....just tried it with a rpi4 and version 6.10 I don't have any of these problems
are you sure the sd card is good? 
can you post your systeminfo?

 

1 hour ago, irate1 said:

How long should it take to reboot on a rpi4?

the first boot is longer because it resizes the root.
The next few seconds 20/30 sec.... I've never calculated.

Link to post
Share on other sites

I loaded a new Samsung Evo Plus microSDHC UHS-I 32 Gb card with 6.10. Same problem with Selectkernel. While playing around trying to figure it out, I also went into UP/DW kernel to see what that would do, and entered this, which shows below: 5.10.33-GentooPlayer-CK-ST+. But the main Selectkernel on execution, shuts down but doesn't reboot, and if I refresh the page, the kernel is blank again.  Maybe you will see something in Boot Options below?

 

I had assumed I needed a kernel installed to use Gentooplayer, but it doesn't seem so, and makes me wonder what the different kernels actually do. I've done a little research on the internet to understand kernels, but now I'm wondering how Gentooplayer could work at all without a kernel installed. 

 

Thanks

 

_____ _ _____ _

/ ____| | | | __ \| |

| | __ ___ _ __ | |_ ___ ___ | |__) | | __ _ _ _ ___ _ __

| | |_ |/ _ \ '_ \| __/ _ \ / _ \| ___/| |/ _` | | | |/ _ \ '__|

| |__| | __/ | | | || (_) | (_) | | | | (_| | |_| | __/ |

\_____|\___|_| |_|\__\___/ \___/|_| |_|\__,_|\__, |\___|_|

__/ |

|___/

Profile: Profile not Setting

RamSystem: Ramsystem not enabled

Free memory: 3586MB of total 3844MB

 

Kernel: 5.10.33-GentooPlayer-CK-ST+

───────────────────────────────────────

GentooPlayer | 04:06 | Mon 21/06/21

───────────────────────────────────────

v6.10-30 | Raspberry Pi 4B+ (aarch64)

───────────────────────────────────────

eth0 | 192.168.4.75

───────────────────────────────────────

 

Players/soft. Info:

Squeezelite-R2 [Disabled]

Squeezelite [Disabled]

Networkaudiod [Disabled]

LigitechMediaServer [Disabled]

BubbleUpnp [Enabled]

HQPlayer Embedded [Disabled]

Mpd [Enabled]

UpMpdCli [Enabled]

RoonBridge [Disabled]

RoonServer [Disabled]

Mpd-Sima [Disabled]

MYmpd [Disabled]

minimserver [Disabled]

shairport-sync [Disabled]

spotify-connect [Disabled]

web-interface [Enabled]

Samba [Disabled]

gmediarender [Disabled]

camillagui [Disabled]

 

GP-Service Info:

gpchronystop [Enabled]

gphavagedstop [Enabled]

gpireteonline [Enabled]

gpkernel1 [Enabled]

gprtclock [Enabled]

gpsetrestart [Enabled]

 

Started Service:

dhcpcd

netmount

mpd

bubbleupnp

upmpdcli

local

 

Stopped Service:

chronyd

gpkernel1

gprtclock

gpireteonline

gpchronystop

sysftw

gphavagedstop

gpsetrestart

 

Crashed Service:


 

Boot Options:

dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait noibrs noibpb nopti nospectre_v2 nospectre_v1 l1tf=off nospec_store_bypass_disable no_stf_barrier mds=off mitigations=off

 

 

 

Link to post
Share on other sites

Feature Request: sc2mpd

 

Using the Songcast app to capture audio from windows 10 computer (or Mac also, I believe) to watch live or recorded concerts or YouTube and cast the audio to Gentooplayer on the RPi4.
See https://www.lesbonscomptes.com/upmpdcli/index.html.  
Linn Songcast app
sc2mpd

 

I like to watch live or recorded live concerts on my Windows 10 computer at my desk. I used to use a Linn Majik streamer, and with the Linn Songcast app on my computer, it would capture the audio and cast the audio to the Linn Majik streamer, amps, and speakers across the room. I think Songcast can cast at high bit rates also. Now I use a RPi4 with Gentooplayer, but I have never found another app or software that does what Songcast can do. One could do the same with YouTube or video files, or anything you can play on your computer. So, for example, you could open Spotify or Tidal or Qobuz or Soundcloud apps or websites or anything else on your computer, and Songcast the audio across the room (and mulitroom I believe). You could go to the Radio Paradise website and play their FLAC streams, rather than the 320 stream that is available on Gentooplayer radio.  I think adding the capability to make the receiving device an OpenHome renderer would work similarly, but I've never been able to successfully add sc2mpd or OpenHome to my RPi4 renderer, so I'm not sure if they are identical or overlap in capabilities. Even using BubbleUPnP, my songcast app doesn't find Gentooplayer on the rpi4.  

So, if Songcast and OpenHome were an option to install and enable on Gentooplayer, I think it would greatly expand what people could listen to from their computer, but through their stereo.

 

Thanks!

Link to post
Share on other sites
2 hours ago, irate1 said:

and if I refresh the page, the kernel is blank again

in selectkernel is always blank....

the kernel in use you see in systeminfo

 

Quote

Free memory: 3586MB of total 3844MB

 

Kernel: 5.10.33-GentooPlayer-CK-ST+

───────────────────────────────────────

GentooPlayer | 04:06 | Mon 21/06/21

───────────────────────────────────────

v6.10-30 | Raspberry Pi 4B+ (aarch64)

───────────────────────────────────────

eth0 | 192.168.4.75

 

Link to post
Share on other sites

6.10 img always fails to flash (does not pass the balena etcher validation)

anyone else with the problem?

thnx

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites

It seems that something is not working with the c3po plugin 

9BD58DBF-7A3E-4307-8DE1-3CA16B15583B.jpeg
after updating to 6.10 this is..

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites
3 hours ago, DomieMic65 said:

6.10 img always fails to flash (does not pass the balena etcher validation)

anyone else with the problem?

thnx

Despite the error in etcher it seems that all is ok

Mac Mini with JRMC26 or Audirvana  / Raspberry4B_4GB(GentooPlayer_LMS) / Raspberry Rpi3B+: Allo DigiOne(GentooPlayer) - M2Tech Evo DAC Two Plus/iPurifier2 - Schiit Vali 2 - Densen DM20pre/30pwr amps - Spendor SP2/3E, Sennheiser HD600 & HD25Aluminum - Audeze Sine

Cables: Vovox, DIY, Furutech. 

Portable sources: iPad, DELL Laptop with JRiver MC26

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...