Jump to content
IGNORED

GentooPlayer


Recommended Posts

the supported drivers should be these:

 

[1] SABRE ES90xx support 384khz      [37] HIFIBerry Amp(Amp+)
 [2] DAC USB                          [38] HIFIBerry DAC
 [3] Allo Boss Dac                    [39] HIFIBerry DAC+
 [4] Allo DigiOne                     [40] HIFIBerry DAC+ Light
 [5] Allo DigiOne Signature           [41] HIFIBerry DAC+ Pro
 [6] Allo Katana Dac                  [42] HIFIBerry Digi(Digi+)
 [7] Allo MiniBoss Dac                [43] HIFIBerry Digi+ Pro
 [8] Allo Piano 2.1 Hi-Fi Dac         [44] Hifimediy ES9023
 [9] Allo Piano Hi-Fi Dac             [45] IanFIFO II
 [10] Audio on Board (Rpi)            [46] IQaudIO Pi-AMP+
 [11] Audiophonics ES9018 Dac         [47] IQaudIO Pi-DAC
 [12] Audiophonics ES9023 Dac         [48] IQaudIO Pi-DAC PRO
 [13] Audiophonics ES9023 Dac Lte     [49] IQaudIO Pi-DAC+
 [14] Audiophonics ES9023 Dac Txco    [50] IqaudIO Pi-DACZero
 [15] Audiophonics ES9028 Dac         [51] IQaudIO Pi-Digi+
 [16] Audiophonics PCM5102 Dac        [52] IQaudIO Pi-DigiAMP+
 [17] Audiophonics PCM5122            [53] JustBoom AMP HAT(Zero)
 [18] Audiophonics PCM5122 Dac        [54] JustBoom DAC HAT(Zero)
 [19] Audiophonics TDA1387 Dac        [55] JustBoom Digi HAT(Zero)
 [20] Buffalo I                       [56] Lucid Labs Raspberry Pi DAC
 [21] Buffalo II/IIIse                [57] Mamboberry HiFi DAC+
 [22] DDDAC1794 NOS                   [58] Mamboberry LS DAC+
 [23] Denafrips Pontus R2R Dac (I2S)  [59] Pi2Design 502DAC
 [24] DIAL-DAC                        [60] Pi2Design 502DAC PRO
 [25] Dion Audio LOCO                 [61] Pi2Design 503HTA Hybrid Tube AMP
 [26] Dion Audio LOCO V2              [62] Pimoroni pHAT DAC
 [27] DIYINHK ES9023 Dac              [63] PlainAMP
 [28] Durio Sound PRO                 [64] PlainDAC
 [29] G2 Labs BerryNOS                [65] PlainDAC+
 [30] G2 Labs BerryNOS Red            [66] PlainDSP
 [31] Generic-1 I2S (hifiberry-dac)   [67] RaspiPlay4
 [32] Generic-2 I2S (rpi-dac)         [68] Red Rocks Audio DigiDAC1
 [33] HIFI DAC                        [69] RPi-DAC
 [34] HIFI DAC+                       [70] Soekris DAM1021/1121 (I2S)
 [35] HIFI Digi                       [71] Suptronics x400
 [36] HIFI Digi+

default starts with the SABER ES90xx support 384khz drivers which should be fine in most dac i2s..

 

 

Selection_432.png

Link to comment

Firstly, I was a bit skeptical, I thought it would be difficult to install, it's clearly not. First try Boom it works !

 

Secondly, Whoa the sound ! One of the best if not the best.

 

One point, I was just unable to create an UPnP end point, even with MPD.

 

Anyway, that's a great distribution

join the resistance

Link to comment
5 hours ago, Gordian said:

Exactly, that would be very nice of you if you could add Upmpdcli in the distribution.

 

 

yes, that can be done without problems ...

however if you want you can try it too ...

Consider that gentoo does not install binaries but compiles them, so some operations take a long time, especially on ARM architectures.

Assuming you've expanded the root partition with gparted, you can continue like this:

 

emerge-webrsync
echo "media-libs/libmpdclient **" >> /etc/portage/package.keywords/my_key
echo "media-sound/upmpdcli **" >> /etc/portage/package.keywords/my_key
echo "net-libs/libupnpp **" >> /etc/portage/package.keywords/my_key
echo "net-libs/libupnp **" >> /etc/portage/package.keywords/my_key

 

if you are interested in qobuz, tidal, ...:

USE="thirdparty" emerge --ask media-sound/upmpdcli

otherwise:

 

emerge --ask media-sound/upmpdcli

then you have to edit the configuration file as wiki

Link to comment

Hi Antonello, following my dear friend Gordian, congratulations for the nice job : the os is rpetty simple to put in place, options are very clear and it's already make sing my Metrum Acoustics Ambre. 

One question, : when you mention above qobuz and Tidal, it is linked to the options of upmpdcli v1.3.6 ?

 

Thanks 

Link to comment

Hi Antonello, following my dear friend Gordian, congratulations for the nice job : the os is rpetty simple to put in place, options are very clear and it's already make sing my Metrum Acoustics Ambre. 

One question, : when you mention above qobuz and Tidal, it is linked to the options of upmpdcli v1.3.6 ?

 

Could you also clarify what is the meaning of the different RT kernel (1, 2..4) for the Pi version ?

 

Thanks 

Link to comment
31 minutes ago, Patatorz said:

One question, : when you mention above qobuz and Tidal, it is linked to the options of upmpdcli v1.3.6 ?

yes, I think so

 

I state that I am the least informed about upnp ... even if any of you can pull something out well ...

But it seems to you, when you launch it, however I have this type of information:

 

GentooPlayerRaspi /media #  * Starting upmpdcli ...
:3:src/mediaserver/contentdirectory.cxx:181::ContentDirectory: not creating entry for gmusic because neither gmusicuser nor gmusicautostart are defined in the configuration
:3:src/mediaserver/contentdirectory.cxx:181::ContentDirectory: not creating entry for qobuz because neither qobuzuser nor qobuzautostart are defined in the configuration
:3:src/mediaserver/contentdirectory.cxx:181::ContentDirectory: not creating entry for spotify because neither spotifyuser nor spotifyautostart are defined in the configuration
:3:src/mediaserver/contentdirectory.cxx:181::ContentDirectory: not creating entry for tidal because neither tidaluser nor tidalautostart are defined in the configuration    

and in fact I have not set any user and psw in the configuration file .... that's this
https://paste.pound-python.org/raw/mA5aFWNcXzIKNMKaoXJB/

 

where in particular

 

# <grouptitle>Tidal streaming service parameters</grouptitle>

# <var name="tidaluser" type="string"><brief>Tidal user name.</brief>
# <descr>Your Tidal login name.</descr></var>
#tidaluser = your tidal user name
# <var name="tidalpass" type="string"><brief>Tidal password.</brief>
# <descr>The password for your Tidal account.</descr></var>
#tidalpass = your Tidal password
# <var name="tidalquality" type="cstr" values="low high lossless">
# <brief>Tidal stream quality.</brief> <descr>'low' and 'high' are aac
# streams. 'lossless' is FLAC and will only work if your subscription
# allows it.</descr></var>
#tidalquality = low/high/lossless

# <grouptitle>Qobuz streaming service parameters</grouptitle>

# <var name="qobuzuser" type="string"><brief>Qobuz user name.</brief>
# <descr>Your Qobuz login name.</descr></var>
#qobuzuser = [email protected]
# <var name="qobuzpass" type="string"><brief>Qobuz password.</brief>
# <descr>The password for your Qobuz account.</descr></var>
#qobuzpass = agoodpassword
# <var name="qobuzformatid" type="cstr" values="5 7">
# <brief>Qobuz stream quality.</brief> <descr>5 for mp3/320, 7 for FLAC if
# your subscription allows it.</descr></var>
#qobuzformatid = 5

# <grouptitle>Google Music streaming service parameters</grouptitle>

# <var name="gmusicuser" type="string"><brief>Google Music user name.</brief>
# <descr>Your Google Music login name (probably a gmail address).</descr></var>
#gmusicuser = [email protected]
# <var name="gmusicpass" type="string"><brief>Google Music password.</brief>
# <descr>The password for your Google Music account.</descr></var>
#gmusicpass = agoodpassword
# <var name="gmusicquality" type="cstr" values="hi med low">
# <brief>Google Music stream quality.</brief> <descr>'hi' for mp3/320, 'med'
# for mp3/160, 'low' for mp3/128.</descr></var>
#gmusicquality = med
# <var name="gmusicdeviceid" type="string"> <brief>Google Music device
# id.</brief> <descr>Your system MAC address will be used by default, but
# it seems that this does not work any more and that an Android deviceid is
# needed. upmpdcli will try to get one from the list of registered
# devices. If this does not work, you will need to set the gmusicdeviceid
# value to the device ID from a phone or tablet on which you also use
# Google Play Music (look up "Android deviceid" for help).</descr></var>
#gmusicdeviceid =

what I saw that works with LMS for example ...

 

image.thumb.png.84a712d8a7daa0e535f0dfdccdd6f6d8.png

 

Quote

Could you also clarify what is the meaning of the different RT kernel (1, 2..4) for the Pi version ?

 

 

There are various kernel configurations to check with which you can find better

Link to comment

Hi 

It took at least 3 hours to compile but now it works like a charm !

 

To make it play music is actually quite easy : just download an app like Mconnect on your phone/ipad, choose UpMpd as renderer in the 'play to' section and Qobuz in the 'Browser' section, that's it !

 

Of course you can choose LMS as 'local server' in the 'browser' section to play your music,  providing you installed the plugin called 'UPnP/DLNA Media Interface' in LMS to create an UPnP server.

 

Hope that can help.

 

 

And again thanks for your help

join the resistance

Link to comment
10 hours ago, Gordian said:

Hi 

It took at least 3 hours to compile but now it works like a charm !

 

:)   in the next image I include it ...
 

 

Quote

To make it play music is actually quite easy : just download an app like Mconnect on your phone/ipad, choose UpMpd as renderer in the 'play to' section and Qobuz in the 'Browser' section, that's it !

 

Of course you can choose LMS as 'local server' in the 'browser' section to play your music,  providing you installed the plugin called 'UPnP/DLNA Media Interface' in LMS to create an UPnP server.

 

Hope that can help.

 

 

And again thanks for your help

 

Thanks!
I saw that it works ...
what seems to me that does not work is the gapless ... is it so? or is there any setting to change?

thanks to you

Link to comment

By default UPnP is not managing gapless.....some manufacturers tweaked UPnP (dCS) with their app and the renderer in order to handle this and others like Linn développed OpenHome to overcome the problems of UPnP (management of playlists at renderer level, gapless...). You can transform an UPnP renderer into OpenHome with bubbleupnp server for example. As OpenHome renderer you have linn, auralic, Lumin etc....so bubbleupnp server could be also a good solution to integrate in the distribution.

Link to comment
20 hours ago, antonellocaroli said:

 

yes, that can be done without problems ...

however if you want you can try it too ...

Consider that gentoo does not install binaries but compiles them, so some operations take a long time, especially on ARM architectures.

Assuming you've expanded the root partition with gparted, you can continue like this:

 


emerge-webrsync

echo "media-libs/libmpdclient **" >> /etc/portage/package.keywords/my_key
echo "media-sound/upmpdcli **" >> /etc/portage/package.keywords/my_key
echo "net-libs/libupnpp **" >> /etc/portage/package.keywords/my_key
echo "net-libs/libupnp **" >> /etc/portage/package.keywords/my_key

 

if you are interested in qobuz, tidal, ...:


USE="thirdparty" emerge --ask media-sound/upmpdcli

otherwise:

 


emerge --ask media-sound/upmpdcli

then you have to edit the configuration file as wiki

 

Tried this, but when I do

emerge --ask media-sound/upmpdcli

I get:

!!! Your current profile is invalid. If you have just changed your profile
!!! configuration, you should revert back to the previous configuration.

 

What am I doing wrong?

 

audio system

 

Link to comment
20 minutes ago, bodiebill said:

 

Tried this, but when I do


emerge --ask media-sound/upmpdcli

I get:

!!! Your current profile is invalid. If you have just changed your profile
!!! configuration, you should revert back to the previous configuration.

 

What am I doing wrong?

proceed so:

 

/etc/init/ntp-client restart
emerge-webrsync

and then

emerge --ask media-sound/upmpdcli

it will take a bit 'of time...

Assuming you've expanded the root partition with gparted.
or wait for the next image ...

Link to comment
3 hours ago, Patatorz said:

By default UPnP is not managing gapless.....some manufacturers tweaked UPnP (dCS) with their app and the renderer in order to handle this and others like Linn développed OpenHome to overcome the problems of UPnP (management of playlists at renderer level, gapless...). You can transform an UPnP renderer into OpenHome with bubbleupnp server for example. As OpenHome renderer you have linn, auralic, Lumin etc....so bubbleupnp server could be also a good solution to integrate in the distribution.

 

Yes, it seems that bubbleupnp the gapless works

 

ac, ext: flac, codec: flac, samplerate:44100, bits: 16, channels: 2, duration: 93.186667s, ReplayGain: false
[qtp1724457619-176 (176)     ] INFO     - 0:38:58.890    - .FfmpegPCMDecodeServlet     : decode info: {"contentType":"audio/wav","samplerate":44100,"channels":2,"bitsPerSample":16,"duration":93.186667,"bytesPerSecond":176400,"decodeUrl":"http://192.168.178.82:58050/ffmpegpcmdecode/stream/966fef0b-56a3-4ec3-ae33-abffd44ee459.wav","hasReplaygainApplied":false,"isAudioChanged":false,"isShoutcast":false}
[qtp1724457619-70 (70)       ] INFO     - 0:38:58.901    - .t                          : proxy stream request /stream/audio/674740dac5b96d4c1e13ae91010db32d.flac => <suppressed URL>
[main (1)                    ] INFO     - 0:38:58.904    - .AVTransportService         : GAPLESS: setNextAVTransportURIAction: http://192.168.178.82:58050/stream/audio/674740dac5b96d4c1e13ae91010db32d.flac
[main (1)                    ] INFO     - 0:38:58.906    - .OpenHomeService            : UpMpd (OpenHome): next playback item position: 4
[main (1)                    ] INFO     - 0:39:00.403    - .a                          : setGaplessTransportStateChange: false
[main (1)                    ] INFO     - 0:39:00.404    - .b                          : UpMpd: TransportState: Playing
[qtp1724457619-176 (176)     ] WARNING  - 0:39:00.407    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:00.512    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:00.619    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:00.725    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:00.831    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:00.937    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:01.44     - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:01.150    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:01.255    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[qtp1724457619-176 (176)     ] WARNING  - 0:39:01.362    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993902
[main (1)                    ] INFO     - 0:39:01.468    - .ac                         : started task TimeTask
[com.bubblesoft.bubbleupnpser] INFO     - 0:39:04.182    - .q$b                        : proxy: onResponseComplete: total response bytes: 8565035
[pool-3-thread-1 (24)        ] INFO     - 0:39:04.289    - .k                          : saved /root/urlcache.dat, 28 entries took: 3 ms
[GetTransportStateTask (293) ] INFO     - 0:39:53.757    - .AVTransportService$a       : GAPLESS: Simulate STOPPED on track change
[main (1)                    ] INFO     - 0:39:53.758    - .a                          : setGaplessTransportStateChange: true
[main (1)                    ] INFO     - 0:39:53.759    - .a                          : isGaplessTransportStateChange: true
[main (1)                    ] INFO     - 0:39:53.760    - .b                          : gapless TransportState change
[main (1)                    ] INFO     - 0:39:53.760    - .b                          : UpMpd: TransportState: Stopped
[main (1)                    ] INFO     - 0:39:53.762    - .ac                         : stopping task TimeTask
[main (1)                    ] WARNING  - 0:39:54.3      - .Resource                   : cannot parse resolution: QOBUZ_HI_RES
[main (1)                    ] INFO     - 0:39:54.12     - .a                          : SetNextAVTransportURI(http://192.168.178.82:58050/stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac, <DIDL-Lite xmlns="urn:schemas-upnp-org:metadata-1-0/DIDL-Lite/" xmlns:upnp="urn:schemas-upnp-org:metadata-1-0/upnp/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dlna="urn:schemas-dlna-org:metadata-1-0/" xmlns:sec="http://www.sec.co.kr/" xmlns:pv="http://www.pv.com/pvns/"><item id="track/get?track_id=55993904" parentID="" restricted="1"><upnp:class>object.item.audioItem.musicTrack</upnp:class><dc:title>La Terpsichore: VI. Deuxième Rondeau</dc:title><dc:creator>Jordi Savall</dc:creator><upnp:artist>Jordi Savall</upnp:artist><upnp:albumArtURI>https://static.qobuz.com/images/covers/lb/v2/tb5mejwi1v2lb_600.jpg</upnp:albumArtURI><upnp:genre>Classique</upnp:genre><dc:date>2018-12-06 23:00:00 +0000</dc:date><upnp:album>Terpsichore: L'apothéose de la danse baroque</upnp:album><upnp:originalTrackNumber>6</upnp:originalTrackNumber><res protocolInfo="http-get:*:audio/x-flac:DLNA.ORG_OP=01;DLNA.ORG_FLAGS=01700000000000000000000000000000" bitsPerSample="16" sampleFrequency="44100" duration="0:01:15.000">http://192.168.178.82:58050/stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac</res></item></DIDL-Lite>)
[qtp1724457619-176 (176)     ] INFO     - 0:39:54.27     - .FfmpegPCMDecodeServlet     : decode params: {"itemId":"track/get?track_id\u003d55993904","url":"http://192.168.178.82:58050/stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac","ext":"flac","supportsL16":true,"supportsL24":false,"supportsWAV":true,"soxResamplePrecision":28,"forcedSamplerate":-1,"maxSamplerate":-1,"defaultSamplerate":-1,"convert24BitTo16Bit":false,"downmixMultichannelToStereo":false,"convertMonoToStereo":true,"padEndOfTrack":true,"replaygain":"drop","rendererIpAddress":"192.168.178.82","rendererUdn":"a632e261-f30b-cb3a-cce8-b827eb2f3f4d"}
[qtp1724457619-176 (176)     ] INFO     - 0:39:54.31     - .FFMpegUtils                : removed expired cached probe info for http://192.168.178.82:58050/stream/audio/a791741e887ac5cdcc67629e507cdbc1.flac_flac
[qtp1724457619-176 (176)     ] INFO     - 0:39:54.34     - .FFMpegUtils                : ffprobe process started, timeout: 30000 ms: ffprobe -show_format -show_streams -seekable 0 http://192.168.178.82:58050/stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac
[pool-3-thread-1 (24)        ] INFO     - 0:39:54.295    - .k                          : saved /root/urlcache.dat, 29 entries took: 4 ms
[qtp1724457619-175 (175)     ] INFO     - 0:39:54.369    - .t                          : proxy stream request /stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac => <suppressed URL>
[com.bubblesoft.bubbleupnpser] WARNING  - 0:39:54.539    - .q$b                        : proxy: onResponseContent: org.eclipse.jetty.d.o
[qtp1724457619-176 (176)     ] INFO     - 0:39:54.542    - .FFMpegUtils                : ffprobe finished
[qtp1724457619-176 (176)     ] INFO     - 0:39:54.545    - .FFMpegUtils                : added cached probe info for http://192.168.178.82:58050/stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac_flac, expires in 75 seconds
[qtp1724457619-176 (176)     ] INFO     - 0:39:54.547    - .FfmpegPCMDecodeServlet     : input url: http://192.168.178.82:58050/stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac, format: flac, ext: flac, codec: flac, samplerate:44100, bits: 16, channels: 2, duration: 75.840023s, ReplayGain: false
[qtp1724457619-176 (176)     ] INFO     - 0:39:54.549    - .FfmpegPCMDecodeServlet     : decode info: {"contentType":"audio/wav","samplerate":44100,"channels":2,"bitsPerSample":16,"duration":75.840023,"bytesPerSecond":176400,"decodeUrl":"http://192.168.178.82:58050/ffmpegpcmdecode/stream/1eae792d-8915-4403-8169-cf2df731378d.wav","hasReplaygainApplied":false,"isAudioChanged":false,"isShoutcast":false}
[main (1)                    ] INFO     - 0:39:54.561    - .AVTransportService         : GAPLESS: setNextAVTransportURIAction: http://192.168.178.82:58050/stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac
[main (1)                    ] INFO     - 0:39:54.563    - .OpenHomeService            : UpMpd (OpenHome): next playback item position: 5
[main (1)                    ] INFO     - 0:39:55.778    - .a                          : setGaplessTransportStateChange: false
[main (1)                    ] INFO     - 0:39:55.779    - .b                          : UpMpd: TransportState: Playing
[qtp1724457619-176 (176)     ] WARNING  - 0:39:55.782    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:55.888    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:55.992    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:56.96     - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:56.200    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:56.304    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:56.408    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:56.512    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:56.617    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[qtp1724457619-176 (176)     ] WARNING  - 0:39:56.721    - .JettyUtils                 : no current decode info found for item key: a632e261-f30b-cb3a-cce8-b827eb2f3f4d_track/get?track_id=55993903
[main (1)                    ] INFO     - 0:39:56.824    - .ac                         : started task TimeTask
[qtp1724457619-70 (70)       ] INFO     - 0:40:14.322    - .t                          : proxy stream request /stream/audio/13dffcd2f9addba80cc93dac98d105ef.flac => <suppressed URL>
[com.bubblesoft.bubbleupnpser] INFO     - 0:40:17.787    - .q$b                        : proxy: onResponseComplete: total response bytes: 5694412

Selection_434.thumb.png.a96b0796d376bd37a1156a895b379d8c.png

 

using lumin...

Of course it is that bubbleupnp needs java, I have to evaluate if then it is possible to use it in ram, given the little ram of the rpi ...

Link to comment

I'm not sure that BubbleUPnP needs to be added in the raspi version but it would be a great idea to add it in the PC 64bits version to make a complete server with LMS and BubbleUPnP. In that case, ram would be more than sufficent with 4Go or more.

 

Actually my plan is to have a server with GentooPlayer and LMS in a second time :)

join the resistance

Link to comment
26 minutes ago, antonellocaroli said:

proceed so:

 


/etc/init/ntp-client restart

emerge-webrsync

and then


emerge --ask media-sound/upmpdcli

it will take a bit 'of time...

Assuming you've expanded the root partition with gparted.
or wait for the next image ...

 

Thanks for the quick reply! 

 

I had to install ntp first and then do 

/etc/init/ntp-client.d restart

and now I got it working.

 

Out of curiosity: when can we expect the next image with upmpdcli ?

 

audio system

 

Link to comment

Just finished few tests with UPnP. I use minimserver as server with transcoding flac and dsd to wave. In this case i have a strong noise (no music). If i remove the transcoding from minimserver, i can listen to flac without any problem. I tried on another system (dCS network Bridge renderer) and no problem with the transcoding to wave. I will open a ticket in upmpdcli.

I'm trying also in a couple of minutes the connection to qobuz with UPMPDCLI

 

How to upgrade UPMPDCLI to the latest version (1.3.8) ?

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...