griorii Posted February 17, 2020 Share Posted February 17, 2020 Hello. Thank you for your hard work. It's a great job and a great result. I want to ask you a question. I use two devices. The first is an audio computer as a server. The second is raspberry b3+ as an endpoint. There's a gentooplayer installed everywhere. How do I install samba/nfs server on the first device? Can I do it myself? Thank you very much. Link to comment
griorii Posted February 18, 2020 Share Posted February 18, 2020 9 hours ago, nbpf said: Thanks that worked perfectly! I have by the way switched off the USB bus (with "echo '1-1' | tee /sys/bus/usb/drivers/usb/unbind") because I do not need a wired Ethernet connection and I do not replay from local drives. This brings down the power consumption of a RPi 3B+ (idle, cpufreq 1400MHz) from about 0.5A to 0.24A. I cannot say this has any obvious beneficial effects on the sound quality of my system but it certainly does not hurt. Do you use wi-fi? Is it better for sound quality for you? Many claim that it is in Pi3b+ that the use of 5 GHz wi-fi improves the quality compared to Ethernet. Ethernet is more noisy because of the USB chip. I have not yet found a confirmation for this. Link to comment
griorii Posted February 18, 2020 Share Posted February 18, 2020 12 minutes ago, antonellocaroli said: it might be true if you use rpi3 and dac usb directly connected to the rpi usb...because rpi3 has the shared lan and usb bus... but I seriously doubt that wifi is better than lan.... No, I use the gpio I2s "Pi2Design PI2AES" hat myself. Directly turning on usb dac is very noisy for me. Ethernet is better for me too. Link to comment
griorii Posted June 28, 2020 Share Posted June 28, 2020 Hello. Could you add a CDDA package to gentooplayer PC? For rip CDs in terminal. I have a large collection of cd. Is it complicated? Thank you. Link to comment
griorii Posted June 28, 2020 Share Posted June 28, 2020 Cdda2wav http://www.cdda2wav.de/ Link to comment
griorii Posted June 29, 2020 Share Posted June 29, 2020 Thank. But the command: emerge --ask app-cdr/cdrtools Throws an error: emerge: searching for similar names ... nothing similar found. RAMdisk not used Link to comment
griorii Posted June 29, 2020 Share Posted June 29, 2020 1 hour ago, antonellocaroli said: you have to get out of the ramdisk, if you use it... and before you install software if you've never done it you have to give: emerge --rsynchttps://github.com/gentooplayer/gentooplayer.github.io/wiki/Shell-software-management grazie mille 🙂 Link to comment
griorii Posted August 6, 2020 Share Posted August 6, 2020 Hello. Samba service on PC32_64 works only in ST kernel? Thanks. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now