Jan.ho Posted June 16, 2020 Share Posted June 16, 2020 Is there any plan on adding BruteFIR ? Link to comment
Jan.ho Posted June 16, 2020 Share Posted June 16, 2020 Thanks you for the fast response! I already tried the 2nd version prior to my question, but I could not make it further than this... GentooPlayerRpi4-64 ~ # emerge --ask brutefir * IMPORTANT: 3 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. These are the packages that would be merged, in order: Calculating dependencies... done! !!! All ebuilds that could satisfy "brutefir" have been masked. !!! One of the following masked packages is required to complete your request: - media-sound/brutefir-1.0k-r2::gentoo (masked by: missing keyword) I haven't tried the first option yet. I'm using the bubbleUPnPServer, will I need make some changes if not using LMS ? Thank you! Link to comment
Jan.ho Posted June 16, 2020 Share Posted June 16, 2020 I tried to install / setup it the ordinary way so: like you said: echo "media-sound/brutefir **" >> /etc/portage/package.accept_keywords/my_key emerge --ask brutefir that took some time but no big error. To actually use bruteFIR I created a sound card: modprobe snd-aloop aplay - L shows the aloe soundcard, no problem. Next step would be to execute this on every start. But I can't see through with these aliases. Then one has to tell ALSA, that aloop is the default sound card. Well, thats difficult to do since you did a good job with implementing the easy sound card switching option. So. I'm petty much stuck here... I would then I created a bruteFIR config file to tell that input is aloop, output is my real output. Link to comment
Jan.ho Posted June 17, 2020 Share Posted June 17, 2020 31 minutes ago, antonellocaroli said: See if this can help you: https://community.roonlabs.com/t/guide-high-quality-room-correction-with-raspberry-pi-roon/15306 thanks. That’s where I started. But they are using Debian not gentoo Linux. so there is no /etc/modules and no etc/asound.conf that I can edit. Link to comment
Jan.ho Posted June 17, 2020 Share Posted June 17, 2020 Well, I came this far now. Is this problem possibly to the fact that I'm trying to do this on a RaspberryPi? 😃 GentooPlayerRpi4-64 ~ # brutefir /home/brutefir/brutefir_config BruteFIR v1.0k (March 2009) (c) Anders Torger Internal resolution is 64 bit floating point. Creating 4 FFTW plans of size 8192...finished. Loading 2 coefficient sets...finished. Failed to find module "alsa". None of the following files existed: "./alsa.bfio" "/usr/local/lib/brutefir/alsa.bfio" "/usr/local/lib/alsa.bfio" "/usr/lib/brutefir/alsa.bfio" "/usr/lib/alsa.bfio" Link to comment
Jan.ho Posted June 17, 2020 Share Posted June 17, 2020 11 minutes ago, antonellocaroli said: @Jan.ho in brutefir_config change modules_path: "."; in modules_path: "/usr/lib64/brutefir/"; Thanks! already found it through your "find" command. My lack of simple command line skills is obvious sorry. Music is playing now, it sounds rather strange than good but I guess I mixed something up with the filters... Thank you very much! Link to comment
Jan.ho Posted June 17, 2020 Share Posted June 17, 2020 Do you think this is actually doing anything? brutefir is running: GentooPlayerRpi4-64 ~ # brutefir /home/brutefir/brutefir_config BruteFIR v1.0k (March 2009) (c) Anders Torger Internal resolution is 64 bit floating point. Creating 4 FFTW plans of size 8192...finished. Loading 2 coefficient sets...finished. Dither table size is 882001 bytes. Generating random numbers...finished. Realtime priorities are min = 2, usermax = 1, mid = 3 and max = 4. Warning: no support for clock cycle counter on this platform. Timers for benchmarking may be unreliable. Filters in process 0: 0 Filters in process 1: 1 Realtime priority 3 set for input process (pid 3184) Realtime priority 4 set for filter process (pid 3186) Realtime priority 4 set for filter process (pid 3185) Realtime priority 3 set for output process (pid 3187) Fixed I/O-delay is 8192 samples Audio processing starts now audio ;-) AUDIO CARDS CARD TYPE ADDRESS NAME -------------------------------------------------------------------------------------------------------- card0 Internal Audio card card0 --> -- RPi-DAC HiFi pcm1794a-codec-0 card0 STATUS --> access: RW_INTERLEAVED format: S16_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 4096 buffer_size: 131072 -------------------------------------------------------------------------------------------------------- card1 Internal Audio card card1 --> -- Loopback PCM card1 STATUS --> access: RW_INTERLEAVED format: S16_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 4410 buffer_size: 22050 -------------------------------------------------------------------------------------------------------- But this is Bcmstat: Config: v0.5.5, args "xgpd10", priority lowest (+19) Board: 4 x cores available, performance governor (Pi4 Model B rev 1.1, BCM2838 SoC with 2GB RAM by Sony UK) Memory: 1014MB (split 998MB ARM, 16MB GPU) HW Block: | ARM | Core | H264 | SDRAM | Min Freq: | 600MHz | 250MHz | 0MHz | 3200MHz | Max Freq: | 1500MHz | 500MHz | 500MHz | 3200MHz | Voltages: | 0, 0.8438V | +0, 1.2000V | Other: temp_limit=85 Firmware: Feb 12 2020 12:36:42, version c3c8dbdf147686fb0c3f32aece709d0653368810 (clean) (release) (start_cd) Codecs: none Booted: Wed Jun 17 19:38:03 2020 Time ARM Core H264 Core Temp (Max) IRQ/s RX B/s TX B/s %user %nice %sys %idle %iowt %irq %s/irq %total cpu0 cpu1 cpu2 cpu3 GPUMem Free MemFreeKB / %used ======== ======= ======= ======= =============== ====== =========== =========== ====== ====== ====== ====== ====== ====== ====== ====== ====== ====== ====== ====== =========== ================= 20:15:09 1500Mhz 500Mhz 0Mhz 53.07C (53.07C) 403 1,418 2,305 0.47 0.05 0.17 97.62 0.00 0.00 0.02 2.38 0.94 3.72 1.33 3.62 9M ( 90%) 1,596,152 / 18.3% 20:15:19 1500Mhz 500Mhz 0Mhz 53.07C (53.07C) 369 649 1,218 0.47 0.00 0.15 97.71 0.02 0.00 0.00 2.29 1.30 3.58 0.90 3.29 9M ( 90%) 1,595,960 / 18.3% 20:15:29 1500Mhz 500Mhz 0Mhz 53.56C (53.56C) 377 721 1,289 0.32 0.02 0.20 97.68 0.02 0.00 0.02 2.32 1.60 3.69 0.41 3.59 9M ( 90%) 1,624,192 / 16.9% 20:15:39 1500Mhz 500Mhz 0Mhz 52.58C (53.56C) 383 683 1,302 0.22 0.02 0.15 97.78 0.00 0.00 0.02 2.22 1.40 3.29 0.90 3.29 9M ( 90%) 1,623,900 / 16.9% Link to comment
Jan.ho Posted June 20, 2020 Share Posted June 20, 2020 18 hours ago, Zauurx said: Out of curiosity, there is no way to integrate a VST plugin ?? I don't even know if this is possible or already done on an rpi ? A small idea behind the head .. or a search for a solution for this:https://www.homeaudiofidelity.com/english/plugins/ I can tell you, that using beuteFIR works really good! (Even on a raspberry Pi4) I stream music (from Tidal) via BubbleUPnP to the MPD then through BruteFIR to a i2s connected DAC. All on one little device. Maybe it was a little more work to install BruteFIR, but compared to Volumio, this is a big step Up! This GentoPlayer is one fine, stable working server/player. It is fast and stable, and sounds great. That’s what we want, no? Special thanks to AntonelloCaroli ! Link to comment
Jan.ho Posted June 22, 2020 Share Posted June 22, 2020 56 minutes ago, antonellocaroli said: @Branko unfortunately the image for BBB hasn't been updated for a long time, actually I don't even know if it's going to be for it.... I don't think there are many users who use it.... NoNoNo! Please keep the BBB with botic updated! My donation was already made and the rPi with BruteFIR you just helped me on was for my dad, and I’m a believer in the BBB with external Master clock input for real high quality Audio out of a SBC. I have one running, but not yet changed to GentooPlayer. And there are many other believers at diyaudio:com, too. Link to comment
Jan.ho Posted June 25, 2020 Share Posted June 25, 2020 19 minutes ago, antonellocaroli said: @Branko @Jan.ho Wonderful news!! Thank you very much!!! Link to comment
Jan.ho Posted June 27, 2020 Share Posted June 27, 2020 I'm trying to configure an audio Input via USB. lsusb -v : Bus 001 Device 003: ID 0a4a:6a02 Ploytec GmbH Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0a4a Ploytec GmbH idProduct 0x6a02 bcdDevice 1.00 iManufacturer 1 Ploytec GmbH iProduct 2 YELLOWTEC PUC2 iSerial 3 no serial number bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x00e4 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 480mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 0x0034 bInCollection 2 baInterfaceNr(0) 1 baInterfaceNr(1) 2 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0602 Digital Audio Interface bAssocTerminal 0 bSourceID 1 iTerminal 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0602 Digital Audio Interface bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 4 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 3 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 4 bRefresh 0 bSynchAddress 133 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0003 1x 3 bytes bInterval 4 bRefresh 5 bSynchAddress 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x012c 1x 300 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x012c 1x 300 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 bRefresh 0 bSynchAddress 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0000 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 GentooPlayerRpi4-64 ~ # cat /etc/modprobe.d/alsa.conf # Alsa kernel modules' configuration file. # ALSA portion alias char-major-116 snd snd-aloop alias snd-card-2 snd-usb-audio alias sound-slot-2 snd-card-2 options snd-usb-audio index=2 # OSS/Free portion alias char-major-14 soundcore ## ## IMPORTANT: ## You need to customise this section for your specific sound card(s) ## and then run `update-modules' command. ## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ## ## ALSA portion ## alias snd-card-0 snd-interwave ## alias snd-card-1 snd-ens1371 ## OSS/Free portion ## alias sound-slot-0 snd-card-0 ## alias sound-slot-1 snd-card-1 ## # OSS/Free portion - card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ## OSS/Free portion - card #2 ## alias sound-service-1-0 snd-mixer-oss ## alias sound-service-1-3 snd-pcm-oss ## alias sound-service-1-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss # Set this to the correct number of cards. options snd cards_limit=3 GentooPlayerRpi4-64 ~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sndrpirpidac [snd_rpi_rpi_dac], device 0: RPi-DAC HiFi pcm1794a-codec-0 [RPi-DAC HiFi pcm1794a-codec-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: PUC2 [YELLOWTEC PUC2], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 BUT: GentooPlayerRpi4-64 ~ # arecord -l **** List of CAPTURE Hardware Devices **** card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 So, there's no sound recording device. What did I miss? My Plan is, to stream the Input from the USB-device through JACK into BruteFIR... long way to go Link to comment
Jan.ho Posted July 8, 2020 Share Posted July 8, 2020 Hello, my bruteFIR is working with mod so far, that's good. I got my USB input to be seen by arecord -l, also good. But, here it comes... 2013-11-28 There was a typo in the last uploaded 1.0m release causing the S24_LE/S24_3LE formats to break for input. So if you downloaded 1.0m yesterday please do it again. 2013-11-27 BruteFIR v1.0m. Fixed a rare race condition bug and further synchronized sample formats with ALSA, so now S24_4LE means low 24 bits of 32 bit word. Thus if you used S24_4LE before you should use S32_LE now to get the old behavior. 2009-03-31 BruteFIR v1.0k. Refreshed JACK and ALSA I/O modules to catch up with changes in the APIs. This is the Changelog from Brutefir. My USB-Input card can not output anything else than S24_3LE now guess whats the latest BruteFIR version available via gentoo packages? v1.0k. of course... That means brutefir does not accept S24_3LE and crashes on start..... Is there any way to force this update or any idea how I can work around this? Link to comment
Jan.ho Posted July 8, 2020 Share Posted July 8, 2020 22 minutes ago, antonellocaroli said: the latest version you installed is 1.0-k2. which is the latest available in general. or are you aware of later versions? not me. https://torger.se/anders/brutefir.html https://pkgs.org/download/brutefir Is 1.0k not only the latest for gentoo? what about 1.0.l, through 1.0.o? (I'm feeling a little stupid now ....) Link to comment
Jan.ho Posted September 30, 2020 Share Posted September 30, 2020 Hi, I’m trying to get GP 3.0 started on a raspberry pi 4. (A new one, with a new SD Card, downloaded the proper image..) Power supply is a MeanWell 3 amp switching PS connected by a usb cable to RPi. I’m using etcher on Mac to copy the image on the SD card. The problem is, the raspberry does not boot from the SD card. The green LED blinks 4 times repeatedly like if there was no SD card. I downloaded Hi-Fi Berry OS to see if the new raspberry or the SD card is faulty, but this works right away. I tried it a second time. Still the same problem. What’s really strange is: i already had a RPi4 with GP2.13 up and running some months ago. I even made a copy from that working image. So I copied the stored image to the new SD card hoping this would work, but no. Still the same blinking as if no SD card in RPi. Did someone encountered the same problem and might help? Thanks. Link to comment
Jan.ho Posted September 30, 2020 Share Posted September 30, 2020 1 minute ago, antonellocaroli said: Be warned, the first time it resizes the root.... so part of it restarts, restarts and then normal part.... I know that, and I waited for 10 minutes to do so. But sill nothing. 16gb. and even so, the copy that I made was resized already. The copy had 16gb. But as I said. Both does not work. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now