jamesg11 Posted April 7, 2018 Share Posted April 7, 2018 18 hours ago, Em2016 said: Nice. Have you been able to use these attached settings on the sonicT i7 running Roon? Or does it struggle? It doesn't have to be to this same DAC but any DSD512 DAC you have, like the iFi iDSD. Waiting ... to see an answer on this ... asdf1000 1 macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted April 9, 2018 Share Posted April 9, 2018 8 hours ago, Em2016 said: Can you ask @agillis to try these settings on the sonicT i7 and report back? Yes, important information, this, for prospective customers. asdf1000 1 macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted April 9, 2018 Share Posted April 9, 2018 1 hour ago, Em2016 said: Hi Andrew. To be clearer, can you confirm the attached HQPlayer settings work with the sonicT i7, running Roon on the same machine? Doesn’t have to be with this DAC shown below - any DSD512 DAC you have is fine. What CPU usage do you get with these particular settings? Appreciated. It’s real hard work getting answers to this ... asdf1000 1 macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted April 19, 2018 Share Posted April 19, 2018 Thanks, how about dsd256 - all good? /& this is into a ifi dac2, or ...? macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted April 22, 2018 Share Posted April 22, 2018 Ok, that be really interesting ... for future sonicT buyers, but also for further thoughts re combining items together on the same - whatever - platform. macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted April 27, 2018 Share Posted April 27, 2018 Very good outcome. Now a very attractive proposition. asdf1000 1 macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted April 28, 2018 Share Posted April 28, 2018 20 hours ago, Em2016 said: * with 2s filters ** not with the DSD512+fs modulator (at present) You need to mention these things otherwise you will get reports of pops by people that don’t read this thread or any thread. I don’t care about the DSD512+fs modulator personally but someone will use it and still complain of pops at some point. Guaranteed to happen. Thanks again for the help and initial fire fighting Sage advice, from experience & keen observation! asdf1000 1 macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted May 25, 2018 Share Posted May 25, 2018 12 hours ago, rickca said: I thought Chord DAVE had a non-decimating DSD filter. Yes, read that somewhere ... But, I’m definitely now moving on from thoughts of getting the Qutest, re both potential streaming & dsd matters. Have to re-think ... a dac that does quality pcm + dsd. macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted June 4, 2018 Share Posted June 4, 2018 On 6/3/2018 at 3:57 PM, Em2016 said: Sample size of 3 (that I know of): 1 can get it working, 2 can't. Tough decision. If I were recommending to a good friend, I'd say email Andrew at SGC and get a custom sonicT i7-8700K made... still a risk without testing beforehand but a smaller risk (maybe?). /& others have found this cpu to nail it? Jussi? macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
jamesg11 Posted July 9, 2018 Share Posted July 9, 2018 Dsd256 is good on DOP, as long as your dac dac is capable of dsd512. macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
Popular Post jamesg11 Posted September 17, 2019 Popular Post Share Posted September 17, 2019 2 hours ago, soares said: Hi, Would it possible to run Roon Core on a computer and just the HQPlayer Embedded on my STi5? As for the time being I won't be able to upgrade my STi5 to an STi9 and I need just a fraction of more computational power to use the new HQP modulators, I was wondering if I could run the core on a Innous and the HQPlayer on the STi5. With my STi5 (old model) + HQP embedded I just get DSD64 with ASDM5EC with regular material (16-bit/44.1khz). With higher files ( e.g. 24/96 or more) I get shutering. Tks, Jorge Yes, I was about to go with the STi9 - & then the new HQP EC modulators arrived ... Back to the drawing board for me ... you need 4ghz+ cpu to run them to dsf256. asdf1000 and soares 1 1 macmini M1>ethernet / elgar iso tran(2.5kVa, .0005pfd)>consonance pw-3 boards>ghent ethernet(et linkway cat8 jssg360)>etherRegen(js-2)>ghent ethernet(et linkway cat8 jssg360) >ultraRendu (clones lpsu>lps1.2)>curious regen link>rme adi-2 dac(js-2)>cawsey cables>naquadria sp2 passive pre> 1.naquadria lucien mkII.5 power>elac fs249be + elac 4pi plus.2> 2.perreaux9000b(mods)>2x naquadria 12” passive subs. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now