Mutec REF 10 Masterclock

[SlowikPL]

About the BNC 75 Ohm cables.

 

I had the opportunity to hear  the dCs - Vivaldi DAC , C.E.C 3.0 source and Mutec MC-3 USB and as master Clock Metec Ref 10.

The used Clock cables BNC Ware Shuynata Sigma Clock 75. And the sound was really good. Very Airly , with very detailed Bass and full body midrange. 

After this I tried another BNC cable. ( had only one PCs - and this connected from Mutec MC-3+ USB to Vivaldi ) This was : Synergistic Research Tesla LE D3 Digital (BNC) This Cable totally Killed the upgrade of the Clock in this setup. 

Also tried those Clock - Upgrade on my own dCs- Rossini ( with even greater magnitude results!!) Seems the Rossini gained more from this Clock Upgrade then Vivaldi. Also here was Synergistic Research Tesla LE D3 Digital (BNC) Totally destructive in my setup. 

 

 

Have anybody compared the BNC - cables Like Shuynata Sigma Clock 75 , Habst BNC 75 ohm reinsilber or others ? In my opinion there are on the market more goodies than this expensive Shuynata? ! Or not ?

[SlowikPL]

1 minute ago, LowMidHigh said:

 

 

As far as I understand, the REF10 sends out an analog, square wave that the receiver uses to time its operation. The mechanism depends on the flip between the bottom and upper region of the wave (when the wave either drops or ascends, it opens and shuts a virtual gate on the receiver side).

 

Unless the cable in question is flawed, I can’t conceive how it can affect that mechanism. Mind you, those ref clocks are installed in mission-critical satellites, and I’m pretty darn sure basic cables are employed (I inquired once with a military engineer). 

 

You say you hear the difference? Run an honest AB/X. If you can still tell which cable is which, kindly offer a theory as to why those expensive cables do a better job in transmitting a repetitive analog square wave. I’m brimming with curiosity.

Hi, 

 

I haven’t tried more then those fancy / pricey cables from above. Just asking anybody it the is a great replacement for Shuynata- BNC cable in there opinion. Any good results in comparison with those fancy ones cables. As I believe too there should be very cheap BNC - 75 Ohm cable maybe from Pro - market. 

I just know that Synergistic Research Tesla LE D3 Digital (BNC) totally killed the sound of those two setups and the very expensive Shuynata was the best from those two. 

[SlowikPL]

2 hours ago, Confused said:

As a clarification, were you using the MC3+USB as a “source” to the Vivaldi, Or was the MC3+USB/REF10 being used to generate the word clock for the Vivaldi?   (I presume the latter)

 

So if my assumption is correct, were you swapping the clock cables as pairs, or do your observations relate to the clock cable between the MC3+USB and the Vivaldi only?  I’m just trying to understand the set up you were trying here.

 

Hi , 

 

C.E.C 3.0 was the source.

MC3+USB/REF10 is being used only to generate the word clock for the VivaldI..

I  had only one pair of Shuynata Sigma Clock 75. and only one cable of Synergistic Research Tesla LE D3 Digital (BNC ) that I used to for testing purposes between the MC+USB and Vivaldi. The second cable in this test between the MC+USB and the Ref 10 was Shuynata Sigma Clock 75

 

Have you got envy experience in more BNC - cables being used MC3+USB/REF10  to generate the word clock with great success with a dCs - gear?

[SlowikPL]

Hi ,

I wanted to know if my setting of my 2x Mutec MC-3 USB and my Ref 10 are proper. I`m using the Clocks witch my dCs Rossini only as a WordClock . One MC-3 is set 44,1 – and multiply of it  and other MC-3 48- and multiply of it .

Can somebody confirm my setting from the photo?