mansr Posted April 26, 2018 Share Posted April 26, 2018 1 hour ago, Marcin_gps said: PCIe x1 is enough. But if you have a choice, I'd recommend installing the card in a x16 slot which often connects directly to a CPU. What is the reason for this recommendation? Going through a switch would add a tiny amount of latency, but I don't see how that could matter. Is there something else? Link to comment
Marcin_gps Posted April 26, 2018 Share Posted April 26, 2018 It just sounds better JPLAY & JCAT Founder Link to comment
mansr Posted April 26, 2018 Share Posted April 26, 2018 Just now, Marcin_gps said: It just sounds better Do you have any theory as to why? Link to comment
rickca Posted April 26, 2018 Share Posted April 26, 2018 35 minutes ago, mansr said: Do you have any theory as to why? Going through the chipset (PCH) definitely seems to add a bunch of noise. The chipset is multiplexing a bunch of stuff onto the DMI 3.0 x4 lanes ... SATA, USB, ethernet and any other PCIe x1 cards. Marcin_gps 1 Pareto Audio AMD 7700 Server --> Berkeley Alpha USB --> Jeff Rowland Aeris --> Jeff Rowland 625 S2 --> Focal Utopia 3 Diablos with 2 x Focal Electra SW 1000 BE subs i7-6700K/Windows 10 --> EVGA Nu Audio Card --> Focal CMS50's Link to comment
jermaink Posted April 26, 2018 Share Posted April 26, 2018 32 minutes ago, rickca said: Going through the chipset (PCH) definitely seems to add a bunch of noise. The chipset is multiplexing a bunch of stuff onto the DMI 3.0 x4 lanes ... SATA, USB, ethernet and any other PCIe x1 cards. Do you think that connecting the JCAT USB card to my second CPU connected PCIe slot (the second graphics card slot) WHILE having a powerful graphics card installed (GTX 1070) would be preferable to having it going via the chipset (PCH) PCIe slot? I only ask because while I know there are a bunch of (noise adding) devices connected via the chipset (PCH), that the graphics card is the most power intensive device in my PC and I wonder if it adds more/less noise compared to the devices on the chipset? Though the graphics card would be idle while listening to serious audio.. Link to comment
Popular Post rickca Posted April 26, 2018 Popular Post Share Posted April 26, 2018 9 minutes ago, jermaink said: Do you think that connecting the JCAT USB card to my second CPU connected PCIe slot (the second graphics card slot) WHILE having a powerful graphics card installed (GTX 1070) would be preferable to having it going via the chipset (PCH) PCIe slot? I only ask because while I know there are a bunch of (noise adding) devices connected via the chipset (PCH), that the graphics card is the most power intensive device in my PC and I wonder if it adds more/less noise compared to the devices on the chipset? Though the graphics card would be idle while listening to serious audio.. That's exactly what I do with my Startech 4-port dual channel USB 3.1 Gen2 card. Of course, it's important to power the card externally with a good 5V LPS. I have my OS on an X25-M SSD with an SOtM SATA II filter, using a separate 5V LPS. lmitche and Marcin_gps 2 Pareto Audio AMD 7700 Server --> Berkeley Alpha USB --> Jeff Rowland Aeris --> Jeff Rowland 625 S2 --> Focal Utopia 3 Diablos with 2 x Focal Electra SW 1000 BE subs i7-6700K/Windows 10 --> EVGA Nu Audio Card --> Focal CMS50's Link to comment
Marcin_gps Posted April 30, 2018 Share Posted April 30, 2018 On 4/26/2018 at 3:31 PM, rickca said: That's exactly what I do with my Startech 4-port dual channel USB 3.1 Gen2 card. Of course, it's important to power the card externally with a good 5V LPS. I have my OS on an X25-M SSD with an SOtM SATA II filter, using a separate 5V LPS. +1 JPLAY & JCAT Founder Link to comment
Marcin_gps Posted May 7, 2018 Share Posted May 7, 2018 If anyone is interested in a comparison between JCAT and other USB Cards, please check out this article: https://www.alpha-audio.nl/2018/04/review-jcat-usb-femto/ (with google translate if Dutch is not your native language :)) Elberoth 1 JPLAY & JCAT Founder Link to comment
Popular Post Marcin_gps Posted January 23, 2019 Popular Post Share Posted January 23, 2019 USB Card FEMTO gets a free update to ver. 2.0: https://jcat.eu/usb-card-femto-gets-a-free-update-to-ver-2-0/ FelipeRolim and RickyV 2 JPLAY & JCAT Founder Link to comment
Solid-State Posted January 23, 2019 Share Posted January 23, 2019 if we don't like the sound of the new fw, where is the backup of the old fw !! Link to comment
andru26 Posted January 23, 2019 Share Posted January 23, 2019 3 hours ago, Marcin_gps said: USB Card FEMTO gets a free update to ver. 2.0: https://jcat.eu/usb-card-femto-gets-a-free-update-to-ver-2-0/ What changes in SQ should we expect from this upgrade? Link to comment
FelipeRolim Posted January 23, 2019 Share Posted January 23, 2019 More analog, more natural and more fluid sound. It seems even more realistic than it was, with better body, richer harmonics, and what has already brought a considerable improvement has now gotten even better. I didn't notice differences in detail, in quantity of information, but I think the sound stage a little better spaced and has more precise image formation. The "approach" of the board has clearly changed. It remains fairly accurate and detailed, but now still hanging to the more natural and realistic side, with less "technicality". At no point did the sound seem distorted, but now it really seems more realistic. I've been listening to the new firmware for about 4 hours. There's really a good improvement. I doubt anyone will want the previous version. I just don't know what the version with two USB ports is, because I'm using the version that has only one... Marcin_gps 1 Link to comment
Marcin_gps Posted January 24, 2019 Share Posted January 24, 2019 16 hours ago, TubeMan said: if we don't like the sound of the new fw, where is the backup of the old fw !! If you don't like the sound, I can send you the old firwmare, but there've been no complaints yet. Which version of the card do you use? 16 hours ago, andru26 said: What changes in SQ should we expect from this upgrade? Less dryness, more music. Felipe's report above is spot on Regards, Marcin JPLAY & JCAT Founder Link to comment
dtb300 Posted January 24, 2019 Share Posted January 24, 2019 Is 1Port the same as the Beta? Or did you do anymore tweaking to it? Franatic 1 DTB Rig: https://cgi.audioasylum.com/systems/9648.html Link to comment
Marcin_gps Posted January 24, 2019 Share Posted January 24, 2019 46 minutes ago, dtb300 said: Is 1Port the same as the Beta? Or did you do anymore tweaking to it? It's almost the same. JPLAY & JCAT Founder Link to comment
Popular Post Solid-State Posted January 24, 2019 Popular Post Share Posted January 24, 2019 Can confirm that this Firmware works excellent on PPA USB V3/4 Card , With great result both are based on NEC/RENESAS uPD720201 chip But everyone flash on ther on risk !! Franatic and rdsu 2 Link to comment
Franatic Posted January 24, 2019 Share Posted January 24, 2019 33 minutes ago, TubeMan said: Can confirm that this Firmware works excellent on PPA USB V3/4 Card , With great result both are based on NEC/RENESAS uPD720201 chip But everyone flash on ther on risk !! Wow that is cool..........I wonder if it would work on a PPA V2 card. 2 modified PCs in a streamer with WS2012/ AO 2.20/ Jplay 7/ Fidelizer Pro 8.2/ Process Lasso/ Pachanko lan cables & PPA ethernet switch between pcs > Audio PC JCat Femto usb audio card > iFi Gemini 3.0 dual headed usb cable > iFi iGalvanic > iFi iUsb power 3.0 > iFi iPurifier 3 > Singxer SU-1 (i2s out) > Wyred 4 Sound DAC2V2 DSDse > 1) maxed out Woo WA2 > Beyerdynamic T1 w/ Forza Noir hybrid cable mod 2) Woo WA2 pre amp > Exposure 2010S2 Int Amp + Exposure 2010S2 Power Amp > Von Gaylord Legend Speakers + REL T-5 Sub-Bass System ***Audio system powered by two Equi=Core 300 balanced power sources Link to comment
Solid-State Posted January 24, 2019 Share Posted January 24, 2019 I think so, same chip/ usb card only different clocks Franatic 1 Link to comment
rdsu Posted January 24, 2019 Share Posted January 24, 2019 PPA v2 card use uPD720202 chip, but should works... Franatic 1 Link to comment
Solid-State Posted January 24, 2019 Share Posted January 24, 2019 correct, PPA V3/4 use uPD720202 same fw https://www.renesas.com/eu/en/doc/products/soc/r19pf0043ej0200_usb.pdf Franatic 1 Link to comment
Franatic Posted January 24, 2019 Share Posted January 24, 2019 Thanks, guys. I will try it this weekend! 2 modified PCs in a streamer with WS2012/ AO 2.20/ Jplay 7/ Fidelizer Pro 8.2/ Process Lasso/ Pachanko lan cables & PPA ethernet switch between pcs > Audio PC JCat Femto usb audio card > iFi Gemini 3.0 dual headed usb cable > iFi iGalvanic > iFi iUsb power 3.0 > iFi iPurifier 3 > Singxer SU-1 (i2s out) > Wyred 4 Sound DAC2V2 DSDse > 1) maxed out Woo WA2 > Beyerdynamic T1 w/ Forza Noir hybrid cable mod 2) Woo WA2 pre amp > Exposure 2010S2 Int Amp + Exposure 2010S2 Power Amp > Von Gaylord Legend Speakers + REL T-5 Sub-Bass System ***Audio system powered by two Equi=Core 300 balanced power sources Link to comment
Solid-State Posted January 24, 2019 Share Posted January 24, 2019 did it yesterday works great Link to comment
Franatic Posted January 24, 2019 Share Posted January 24, 2019 I have the JCAT Femto USB card in my Audio PC to output music. I use a PPA V2 to input music drives on my control PC. It will be interesting to see if it makes a difference in SQ. 2 modified PCs in a streamer with WS2012/ AO 2.20/ Jplay 7/ Fidelizer Pro 8.2/ Process Lasso/ Pachanko lan cables & PPA ethernet switch between pcs > Audio PC JCat Femto usb audio card > iFi Gemini 3.0 dual headed usb cable > iFi iGalvanic > iFi iUsb power 3.0 > iFi iPurifier 3 > Singxer SU-1 (i2s out) > Wyred 4 Sound DAC2V2 DSDse > 1) maxed out Woo WA2 > Beyerdynamic T1 w/ Forza Noir hybrid cable mod 2) Woo WA2 pre amp > Exposure 2010S2 Int Amp + Exposure 2010S2 Power Amp > Von Gaylord Legend Speakers + REL T-5 Sub-Bass System ***Audio system powered by two Equi=Core 300 balanced power sources Link to comment
Marcin_gps Posted January 25, 2019 Share Posted January 25, 2019 22 hours ago, TubeMan said: Can confirm that this Firmware works excellent on PPA USB V3/4 Card , With great result both are based on NEC/RENESAS uPD720201 chip But everyone flash on ther on risk !! PPA Card is based on μPD720202 JCAT USB Card FEMTO is based on μPD720201. It's not the same firmware, some options are not available in μPD720202, so use at own risk. JPLAY & JCAT Founder Link to comment
Solid-State Posted January 25, 2019 Share Posted January 25, 2019 1 hour ago, Marcin_gps said: PPA Card is based on μPD720202 JCAT USB Card FEMTO is based on μPD720201. It's not the same firmware, some options are not available in μPD720202, so use at own risk. works great for me Marcin_gps 1 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now