Locke65 Posted February 16, 2021 Share Posted February 16, 2021 Hello I would like to ask for your advice on how to get it working - still couldn't succeed till now. I GUESS the problem is related to the LAN connection, but that's just a guess. Please feel free to suggest another procedure - but only if well documented please. Please let me know, if you need additional information. Description: I try to follow the following procedure: "SACD Backup (Awake-Server Method)" (2019 by Phthalocyanine and Undertone for Audiophile Style) After several attempts I successfully followed the instructions to initiate the BDP-S590 with my remote. In the next step I startet the software "ISO2DSD" and hit "Execute". But unfortunately nothing happens. The IP address I use is correct as I can "see" the BDP-S590 in my router. But I'm not sure the software to BDP-S5900 connection is set up correctly. I later try to ping the BDP-S590 from my Mac and I get a strange response: 64 bytes from 192.168.178.35: icmp_seq=0 ttl=64 time=0.369 ms 64 bytes from 192.168.178.35: icmp_seq=1 ttl=64 time=0.341 ms 64 bytes from 192.168.178.35: icmp_seq=2 ttl=64 time=0.401 ms 64 bytes from 192.168.178.35: icmp_seq=3 ttl=64 time=0.370 ms 64 bytes from 192.168.178.35: icmp_seq=4 ttl=64 time=0.340 ms 64 bytes from 192.168.178.35: icmp_seq=5 ttl=64 time=0.259 ms 64 bytes from 192.168.178.35: icmp_seq=6 ttl=64 time=0.340 ms 64 bytes from 192.168.178.35: icmp_seq=7 ttl=64 time=0.317 ms 64 bytes from 192.168.178.35: icmp_seq=8 ttl=64 time=0.349 ms this goes on for ever.... I believe that's not correct - is it? my setting macOS Catalina 10.15.7 Sony BDP-S590 LAN connection (both (Mac and BDP-S590) are connected via Switch) Sonor - ISO2DSD The USB-Stick It's a JetFlash Transcend 32GB, formate to FAT32 (with "Master Boot Record") (For the preparation I followed "The SACD Ripper's Guide to macOS Media Formatting Universe (Updated April 6, 2018)") The USB-Stick has one folder "AutoScript" with the following content: autorip.sh AutoScript sacd_extract_160 content of the Autoscript: #MTKAT 0.xx script CLI(CLI_exec cp /mnt/sd*/AutoScript/sacd_extract_160 /) CLI(CLI_exec insmod /lib/modules/2.6.35/BDP/splitter.ko) CLI(CLI_exec /sacd_extract_160 -S &) CLI(CLI_drv.ir.rx.sq 0xaf000) CLI(CLI_exec /bin/sh /mnt/sd*/AutoScript/autorip.sh) CLI(CLI_drv.ir.rx.sq 0xaf000) Link to comment
Locke65 Posted February 17, 2021 Share Posted February 17, 2021 Still having problems @Graf_Orlok @MikeyFresh @wouterk thanks for helping! I changed the content of the USB-stick. I tried the folder from GRAF_ORLOK and I tried the content provided by MIKEYFRESH - Still can't start the ripping. Description I changed the content of my USB-Stick to the recommended content. Thanks to GRAF_ORLOK and MIKEYFRESH I successfully ping my BDP-S590 - So LAN is functioning (I changed the name of the device within my router - I guess this has no relevance for the software "iso2dsd" - as it uses the IP address. I follow the procedure "SACD Backup (Awake-Server Method)", I start "iso2dsd_gui.jar", the correct IP is selected, but nothing happens after "Execute". On my Mac: - Within the directory User/MeMyself/documents/ is the folder "iso2dsd" - this folder has the following content: iso2dsd_gui.jar sacd_extract SACDExtractGUI.jar USE_AT_YOUR_OWN_RISK version.txt folder "src" folder "doc" All but "iso2dsd_gui.jar" are from the same source. I'm have no idea how to locate my mistake. Help is very much appriciated. Link to comment
Locke65 Posted February 18, 2021 Share Posted February 18, 2021 @MikeyFresh Concerning the sacd_extract file If I get information ("cmd"I) on sacd_extract kind: TextEdit-document size: 352.550 byte no suffix not 100% sure as I don't remember where I found it - but might be: https://www.dropbox.com/sh/8cunli3d3basmix/AAB8WYDe-AKMCGSWVpNpLIcua/AutoScript?dl=0&subfolder_nav_tracking=1 @MikeyFresh @Graf_Orlok Concerning the method for now I would like to focus on the "SACD Backup (Awake-Server Method)" If I can't get it working - that's a different question. @Graf_Orlok Concerning your questions Firmware: not sure - I found "ESN: Sony-HAV12KL1108D66E0-LZVK00EJTU" (menu / configuration / system-configuration / system-information I also used "network-update" and the BDP-S590 answers: "already actual" quick-start-modus: on Thanks for your help - and - I hope we get closer to a solution. Link to comment
Popular Post Locke65 Posted February 19, 2021 Popular Post Share Posted February 19, 2021 @MikeyFreshit works! Thanks so much The "tip" to make the file "sacd_extract" executable was most helpful! I would like to suggest to include this tip (make sacd_extract executable) into the "general" procedure - I guess Mac-Users are normally not aware of such an option. @Graf_Orlok @MikeyFresh Thanks to the both of you for taking me tough this. MikeyFresh and chichaz 2 Link to comment
Locke65 Posted February 19, 2021 Share Posted February 19, 2021 I like to verify my procedure on handling sacd.iso files. The ISO file is generated with the iso2dsd software (OS X v1) by the sleep-server method. As far as I experienced the software iso2dsd features also the output into single tracks: Output Mode: Sony DSF (as far as I understand a format for DSD). They play just fine! My Question DSF is a format for DSD - is this correct? A DSD / DSF file has only one Channel Mode: Dual OR Multi If I want to keep dual and multi Channel versions I have to options: keep the iso generate two extractions of the tracks from the iso (one multi / one dual) - than discard iso I'm using JRiver as my music-server-software. As far as I understand the sacd.iso can be handled by JRiver directly (https://wiki.jriver.com/index.php/DSD) - JRiver can distinguish between different tracks within the sacd.iso. Even JRemote (iOS-app to connect with iPhone / iPad to JRiver) can play sacd.iso! The only disadvantage of using the sacd.iso: the bad handling of Metadata for sacd.iso compared to DSF-files is this correct? I would appreciate if someone would have an idea how to stream & play hires (DSD) directly on my iPhone - but maybe that's asking for to the impossible? Thanks for your help! setting BDP-S590 MacOS JRiver27 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now