Jump to content
IGNORED

Auralic Vega USB


Recommended Posts

My VEGA handshakes without 5v. If yours doesn't, use a normal cable and then replace it after handshake, that will work if you keep everything powered up as I do.

Source:

*Aurender N100 (no internal disk : LAN optically isolated via FMC with *LPS) > DIY 5cm USB link (5v rail removed / ground lift switch - split for *LPS) > Intona Industrial (injected *LPS / internally shielded with copper tape) > DIY 5cm USB link (5v rail removed / ground lift switch) > W4S Recovery (*LPS) > DIY 2cm USB adaptor (5v rail removed / ground lift switch) > *Auralic VEGA (EXACT : balanced)

 

Control:

*Jeff Rowland CAPRI S2 (balanced)

 

Playback:

2 x Revel B15a subs (balanced) > ATC SCM 50 ASL (balanced - 80Hz HPF from subs)

 

Misc:

*Via Power Inspired AG1500 AC Regenerator

LPS: 3 x Swagman Lab Audiophile Signature Edition (W4S, Intona & FMC)

Storage: QNAP TS-253Pro 2x 3Tb, 8Gb RAM

Cables: DIY heavy gauge solid silver (balanced)

Mains: dedicated distribution board with 5 x 2 socket ring mains, all mains cables: Mark Grant Black Series DSP 2.5 Dual Screen

Link to comment

Not sure, but most would recommend leaving them both on in any case.

 

 

You mean I would have to keep the Aries and Vega full on or just standby?

Source:

*Aurender N100 (no internal disk : LAN optically isolated via FMC with *LPS) > DIY 5cm USB link (5v rail removed / ground lift switch - split for *LPS) > Intona Industrial (injected *LPS / internally shielded with copper tape) > DIY 5cm USB link (5v rail removed / ground lift switch) > W4S Recovery (*LPS) > DIY 2cm USB adaptor (5v rail removed / ground lift switch) > *Auralic VEGA (EXACT : balanced)

 

Control:

*Jeff Rowland CAPRI S2 (balanced)

 

Playback:

2 x Revel B15a subs (balanced) > ATC SCM 50 ASL (balanced - 80Hz HPF from subs)

 

Misc:

*Via Power Inspired AG1500 AC Regenerator

LPS: 3 x Swagman Lab Audiophile Signature Edition (W4S, Intona & FMC)

Storage: QNAP TS-253Pro 2x 3Tb, 8Gb RAM

Cables: DIY heavy gauge solid silver (balanced)

Mains: dedicated distribution board with 5 x 2 socket ring mains, all mains cables: Mark Grant Black Series DSP 2.5 Dual Screen

Link to comment
The Auralic VEGA does not require the 5V to operate. There is no purpose for this option on this Curious USB cable or any other cable. I am still reviewing this cable but initial impressions "I am blown away!"

Thank You...Hauser made me a little nervous. Mine is in the mail. No way to change it...

Link to comment

Apparently so. After reading some more threads, it appears I have given you a bum steer; sorry about that. Although I have both the Vega and Aries, I use a Totaldac cable and am not qualified to say whether a data only cable will work. I was only going off my past poor recollection of others experiences. Hope I haven't caused you anguish.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...