Power LED on Streacom FC10

[_JL_]

Hi,

 

I just built my CAS using a FC10 chassis with the following configuration:

 

- ASRock Z97 Extreme4 motherboard

- Intel i7-4785T CPU

- 8GB RAM

- Samsung 500GB SSD

- G-unique Nano DC-ATX Supply

- Teradak 12V/15A LPS

 

I found that the FC10's front-panel power LED won't turn off after I shutdown the PC, as long as the 12V LPS is still on. This is a bit inconvenient as I use the FC10 headless so I couldn't tell if proper shutdown is completed before I turn off the 12V LPS.

 

Does anyone know how to fix this? I have already tried configuring the BIOS to turn off all smart power management features with no luck.

 

Thanks.

 

Jack

[rattosecond]

Hi,

 

I just built my CAS using a FC10 chassis with the following configuration:

 

- ASRock Z97 Extreme4 motherboard

- Intel i7-4785T CPU

- 8GB RAM

- Samsung 500GB SSD

- G-unique Nano DC-ATX Supply

- Teradak 12V/15A LPS

 

I found that the FC10's front-panel power LED won't turn off after I shutdown the PC, as long as the 12V LPS is still on. This is a bit inconvenient as I use the FC10 headless so I couldn't tell if proper shutdown is completed before I turn off the 12V LPS.

 

Does anyone know how to fix this? I have already tried configuring the BIOS to turn off all smart power management features with no luck.

 

Thanks.

 

Jack

 

I also have the issue...

could be the led

 

i am also awaiting answers.

 

One way to see if the computer has shutdown if the DAC doesn't detect or lock the signal.

[mourip]

LED plugged into wrong header?

[_JL_]

LED plugged into wrong header?

 

I don't think so as I tried both PLED connectors on the Mobo.

 

I verified that the BIOS can turn off the LED if I enable Night mode in the BIOS. But then it is always off, even when the CAS is on. Oh well ...